67 BB pulleys
#1
Instructor
Thread Starter
67 BB pulleys
In the process of my 327 to 427 swap. Noticed the pulleys that came with the 427 do not line up. I realize the 67 had cast iron crankshaft and power steering pulleys originally. I do have power steering.
I am not going for NCRS. Are there substitute pulleys I can use that will work? Or do i need the originals?
Bob
I am not going for NCRS. Are there substitute pulleys I can use that will work? Or do i need the originals?
Bob
Last edited by still cruzin; 06-20-2016 at 09:48 PM.
#2
Team Owner
Do yourself a favor and don't go on the cheap with substitute pulleys and brackets that may or may not work.
Go to one of the good vendors and order everything needed for a 67 Vette BB. Yes this will not be cheap but do it right the first time.
I have done 3 SB to BB conversions.
Dennis
Go to one of the good vendors and order everything needed for a 67 Vette BB. Yes this will not be cheap but do it right the first time.
I have done 3 SB to BB conversions.
Dennis
The following users liked this post:
still cruzin (06-21-2016)