[C2] Where are the heat shields on the exhaust positioned?
#1
Melting Slicks
Thread Starter
Where are the heat shields on the exhaust positioned?
Hi, are they there on one side to deflect direct heat to the oil filter and the other side, the starter? Or what? Thanks as always
The following users liked this post:
MISTERZ06 (07-16-2017)
#3
Melting Slicks
Thread Starter
#4
Race Director
Those heat shield should provide some help. I often times will get cars in that the customer wants to try to cut down on the heat and I actually make my own shields quite similar to what they sell. So much of it somewhat depends on how close the exhaust is to the floorpans.
DUB
DUB
#5
Race Director
Member Since: Jun 2006
Location: Inverness FL
Posts: 17,891
Received 727 Likes
on
621 Posts
St. Jude Donor '07
Those heat shield should provide some help. I often times will get cars in that the customer wants to try to cut down on the heat and I actually make my own shields quite similar to what they sell. So much of it somewhat depends on how close the exhaust is to the floorpans.
DUB
DUB
Bill
#8
Race Director
This is what I use many times and that is that I guess I am lucky and I can drive it where they sell it. I can custom make any shield in basically any shape and this stuff is quite awesome ....NOT saying that the other products shown are not also effective.
The stuff I use ...when made correctly...will not absorb anything into it.
http://www.koolmat.com/exhaust-heatmaster
DUB
The stuff I use ...when made correctly...will not absorb anything into it.
http://www.koolmat.com/exhaust-heatmaster
DUB