bigal883

Hi need a little info on what has to be installed items before body drop. what abosultly has to go in first .throttle link, heater box assembly , emblems , antenna? have radiator support in, can you put shroud on? most of items in engine compartment have been finished. mufflers on or pulled in? working outside have to have body on before snow falls. Help. bigal883.

MasterDave

C2 body drops are easy enough. Can't think of anything that has to be in/on the body prior to drop. Leave the exhaust panel off the rear of the body to allow for exhaust to clear. Leave the fan shroud off IMO.

leif.anderson93

I believe you've got it covered with the items you mentioned. Radiator shroud should be able to be in place. Is the drive train already installed on the chassis?

bigal883

Yes complete drive train engine finished rolling chasis thanks. bigal883

leif.anderson93

MAY have fan to shroud interference if shroud is installed. I would remove the fan from the engine to allow clearance and leave the shroud in place.

packrat

I would also install the fiber insulation piece on the body tunnel above the transmission