[C1] Looking for Fiberglass Panel to Fill Heater Box Opening
#21
Pro
Thread Starter
#22
Race Director
You do know you can make your own flat sheet fiberglass....and fit it to your opening and laminate it in...or do what is shown in this thread....or do it how ever you have figured out how to do it.
https://www.corvetteforum.com/forums...-drag-car.html
Check it out and the end result of the heater box close out (prior to priming) is in POST# 63. And YES...Vette Panel Adhesive is used here also.
DUB
https://www.corvetteforum.com/forums...-drag-car.html
Check it out and the end result of the heater box close out (prior to priming) is in POST# 63. And YES...Vette Panel Adhesive is used here also.
DUB
#23
Safety Car
What little I do know about fiberglass repair I learned from that thread. I've read it over and again. Thanks again for posting all of that info.
#25
Race Director
Due to having the materials/tools to make it...I make my own. And that also includes carbon fiber when needed.
In POSTS #189 to #193....I show how I made my own sheet fiberglass.
https://www.corvetteforum.com/forums...ag-car-10.html
DUB