Wheel Suggestions Needed for my black 63 SWC restomod
#41
Instructor
Thread Starter
These are HRE 300 series matte black center gloss black deep dish lip. I was thinking maybe chrome connecting bolts and a red accent trim around the outer lip. I'm trying to pick something complementary to the look of the car in Chris' avatar....black coupe with factory chrome brightwork but I'm going with similar side pipes as the EVODs. Thoughts? MIght be too much black and maybe need to go with something more base sliver / chrome like the black vert wheels above.
Last edited by baker19; 03-06-2019 at 10:54 PM.
#44
Instructor
Thread Starter
Keep throwing out options guys!
#46
Instructor
Thread Starter
I agree...chrome has been out on new/ /newer cars for well over a decade. However, this is a 56 year old car and something sliver might look more consistent with the looks and accents of the car. I posted that black coupe above that Chris built about 5-6 years ago as this is what mine will look like on the exterior, with polished / chrome brightwork. I'm not doing flush mounted front and rear windows, blacked out bumpers, etc and so it is look pretty traditional other than the bumpers will be tucked tight to the body but still chrome. Polished factory C2 sidepipe covers on the sides as opposed to rear exit exhaust. We're doing a high HP engine (755 HP LT5 is what we are considering now) with a 6 speed and bright red custom interior - not that that matters to the wheels. The chassis is the new Art Morrison 3" drop chassis with minitubs and so it will be dropped and tucked from a stance perspective. Hope that helps a bit.
#47
Safety Car
#49
Drifting
Member Since: Jan 2018
Location: Bellevue, WA
Posts: 1,594
Received 1,555 Likes
on
612 Posts
2023 C2 of the Year Finalist - Modified
2020 C2 of the Year Finalist - Unmodified
Obviously not a Corvette, but it is black, and I like the wheels. Has been a photo I have been saving for my '69 Camaro project.....
Last edited by Dad's '66 427; 03-07-2019 at 12:22 PM.
#50
Safety Car
I ordered those wheels from Boze Forged as well. I had never heard of them until my friend Greg that painted the car told me about them. Really nice father and son team running a small business in California together. Some people made fun of them and said they looked like Nissan wheels(the world of Facebook), but I loved them.
#52
Safety Car
I ordered those wheels from Boze Forged as well. I had never heard of them until my friend Greg that painted the car told me about them. Really nice father and son team running a small business in California together. Some people made fun of them and said they looked like Nissan wheels(the world of Facebook), but I loved them.
What size on the ’63?
What size on the ’67?
Series Clutch or Throttle???
Thanks
George
#53
Instructor
Thread Starter
Decided I don't really like basic five spokes and while the EVODs look nice and were intriguing, I'm now leaning toward something like this or the wheels on Chris's black vert - the Boze Alloys Clutch. I like something like this or a double five spoke type look. The one below I like is the Strausse SM5R signature.
#57
Melting Slicks
These are HRE 300 series matte black center gloss black deep dish lip. I was thinking maybe chrome connecting bolts and a red accent trim around the outer lip. I'm trying to pick something complementary to the look of the car in Chris' avatar....black coupe with factory chrome brightwork but I'm going with similar side pipes as the EVODs. Thoughts? MIght be too much black and maybe need to go with something more base sliver / chrome like the black vert wheels above.
#58
Safety Car
No, the clutch wheels were the version on my 67 convertible. I think the ones I used on the 63 were called tractions. Unfortunately, after getting married, a dog, two kids, and 6 builds, I just don't remember without looking back at the receipts! I am sure Zak at Boze knows! Give him a ring if you can't find them in my previous thread or online.
Last edited by 65silververt; 03-11-2019 at 11:18 PM.
#59
Advanced
Hi there, I’ve been looking for some new wheels for my 64 coupe. It currently has 17” Boyd Coddington rims that are too modern looking for my taste. So are the TTO’s you posted complete with the spinners, or are they optional? Love that combination and thanks for sharing.
Henry
Henry
#60
Drifting
Member Since: Jan 2018
Location: Bellevue, WA
Posts: 1,594
Received 1,555 Likes
on
612 Posts
2023 C2 of the Year Finalist - Modified
2020 C2 of the Year Finalist - Unmodified
I really like these. Do you know who makes these?
Decided I don't really like basic five spokes and while the EVODs look nice and were intriguing, I'm now leaning toward something like this or the wheels on Chris's black vert - the Boze Alloys Clutch. I like something like this or a double five spoke type look. The one below I like is the Strausse SM5R signature.
Decided I don't really like basic five spokes and while the EVODs look nice and were intriguing, I'm now leaning toward something like this or the wheels on Chris's black vert - the Boze Alloys Clutch. I like something like this or a double five spoke type look. The one below I like is the Strausse SM5R signature.