[C2] What vendor reproduces C2 cluster wiring with extensions
#1
Safety Car
Thread Starter
What vendor reproduces C2 cluster wiring with extensions
There is a vendor who manufactures the C2 cluster wiring with longer then original wires at the cluster. It was for the purpose of being able to pull cluster out 2 or 3" further for clearance. I read about it either here or NCRS but cannot find my notes. Anyone know.
#2
Burning Brakes
I used the M&H harness in my 67 and found it to have a bit longer wires than the Lectric Limited. I am not sure that they are 3 inches longer, but they were much better than Lectric Limited style. I would give them a call.
Doc
Doc
The following users liked this post:
MOXIE62 (03-11-2019)
#3
Race Director
I have a vague recollection that American Autowire makes a dash harness with extensions, so ask them about it too. Lots of guys here seem to like their harnesses.
The following users liked this post:
MOXIE62 (03-11-2019)
#4
Instructor
Something like this? Someone else posted this and I thought it was a good idea.
http://www.stl-vettes.com/65Vette/Re...ug_Harness.htm
http://www.stl-vettes.com/65Vette/Re...ug_Harness.htm
Last edited by R2800; 03-11-2019 at 09:04 PM.
The following users liked this post:
MOXIE62 (03-11-2019)
#5
Safety Car
Thread Starter
Something like this? Someone else posted this and I thought it was a good idea.
http://www.stl-vettes.com/65Vette/Re...ug_Harness.htm
http://www.stl-vettes.com/65Vette/Re...ug_Harness.htm