[C2] Need C 2 Coupe Birdcage Measurements.
#1
Melting Slicks
Thread Starter
Need C 2 Coupe Birdcage Measurements.
Does anyone have access to a bare C 2 coupe birdcage? I'm trying to help a good friend who lives in Finland repair his 66 BB coupe after an accident. I was able to get most of the parts he needed in the tri state area, crate them up and ship. He has finished the chassis and is now trying to get the birdcage back in shape so he can mount the roof and rear clip.
The car was hit in the passenger door area so that side of the cage was mangled pretty good . He now needs two measurements to proceed and will probably need some more as he proceeds. There isn't any dimensional information available for the cage as it was jig assembled and welded.
My friend has excellent welding and fabricating skills so with a little help from us he can get his car back on the road. So if you have access to a decent undamaged birdcage please let me know , any and all help appreciated ! Rich
The car was hit in the passenger door area so that side of the cage was mangled pretty good . He now needs two measurements to proceed and will probably need some more as he proceeds. There isn't any dimensional information available for the cage as it was jig assembled and welded.
My friend has excellent welding and fabricating skills so with a little help from us he can get his car back on the road. So if you have access to a decent undamaged birdcage please let me know , any and all help appreciated ! Rich
#2
Melting Slicks
My c2 coupe is all apart and can probably get him some measurements. What exactly are you looking for?
#3
Melting Slicks
Thread Starter
C 2 cage
The first picture shows the passenger side hinge pillar and the angle he needs measured. The second picture shows the drivers side hinge pillar and he needs the distance from the outer tip side to side. He's straightened the cage as best he could and has it sitting on the frame with both doors bolted on. I can send pictures of that later Thanks Rich jcmsp062@aol.com