When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
64 Roadster with a LT-4 6 speed and a Roadster Spec chassis
I am gathering the pieces for another build. This will be my first Vette project. I have a lot of Fords. My son and I have been building 60-70 Mustangs. I got the Corvette bug and I was considering a C1 or 2. I settled on the roadster. I will be picking up the car in March but I have already ordered the chassis and I purchased a LT4 from a 23 Camaro with 3K miles on it. I got the trans as well I will post a few pics of the parts as I go along. If anyone has done one of these please I am open to pointers!
Nice project. I finished my 65 coupe last fall. It’s also on a roadster shop chassis. You’re going to want to get a Dynamic Corvettes rear floor kit. You’ll also need to modify the trans tunnel or buy one from Dynamic. I put an ls3 in mine so I cant help with the lt4 but there are others that have done it. Here’s a pic of mine.
Here is a a few pictures of the car. The guy I got it from said it hasn’t run since 78. But it’s what I wanted a complete original car with a rotted frame that hasn’t been hit.
Nice project. I finished my 65 coupe last fall. It’s also on a roadster shop chassis. You’re going to want to get a Dynamic Corvettes rear floor kit. You’ll also need to modify the trans tunnel or buy one from Dynamic. I put an ls3 in mine so I cant help with the lt4 but there are others that have done it. Here’s a pic of mine.
Very pretty Coupe! I need a coupe and i haven't even started this project. I ordered a tunnel top and a spec roadster tub kit from Dynamic. I also purchased a set of NOS Brembo calipers from a ZR-1. I am trying to get all the pieces together. I still need to figure if I need the dynamic inner fenders and smooth firewall. I haven't found anyone that used the stock pulley setup. I would love to see pics of that. Some guys have used the Wegeners. It is pretty but if I can use the stock stuff I don't see the point of dropping 3K for puleys
Nice project. I finished my 65 coupe last fall. It’s also on a roadster shop chassis. You’re going to want to get a Dynamic Corvettes rear floor kit. You’ll also need to modify the trans tunnel or buy one from Dynamic. I put an ls3 in mine so I cant help with the lt4 but there are others that have done it. Here’s a pic of mine.
Nice project. I finished my 65 coupe last fall. It’s also on a roadster shop chassis. You’re going to want to get a Dynamic Corvettes rear floor kit. You’ll also need to modify the trans tunnel or buy one from Dynamic. I put an ls3 in mine so I cant help with the lt4 but there are others that have done it. Here’s a pic of mine.
Nice project. I finished my 65 coupe last fall. It’s also on a roadster shop chassis. You’re going to want to get a Dynamic Corvettes rear floor kit. You’ll also need to modify the trans tunnel or buy one from Dynamic. I put an ls3 in mine so I cant help with the lt4 but there are others that have done it. Here’s a pic of mine.
64 Roadster with a LT-4 6 speed and a Roadster Spec chassis
