1965 396 Parts - Collection of Links - Add yours
11-17-2012, 08:49 AM
#21
Instructor
35 396 425hp short block for sale
Stamping as follows:
S116670 T0422 IF
Casting Number as follows:
3855962
Should belong to car with VIN of: 194675S116670 (I've been told it was a convertible)
Asking Price - $6,000.00
Engine is ready to be assembled.
Email me if you want me to send you a link to my MS LIVE site where I've posted the pictures. You can also call me and I will give you a DETAILED description of the engine along with some history.
Engine is located in Ohio
bmw_bill@hotmail.com or brobertson@emersonswan.com
860-305-7681 cell
Thanks
BillR
S116670 T0422 IF
Casting Number as follows:
3855962
Should belong to car with VIN of: 194675S116670 (I've been told it was a convertible)
Asking Price - $6,000.00
Engine is ready to be assembled.
Email me if you want me to send you a link to my MS LIVE site where I've posted the pictures. You can also call me and I will give you a DETAILED description of the engine along with some history.
Engine is located in Ohio
bmw_bill@hotmail.com or brobertson@emersonswan.com
860-305-7681 cell
Thanks
BillR
11-18-2012, 09:55 AM
#22
Paid Senior Member
Original 65 BB Hood
Factory original, white fiberglass, 65 BB hood with chrome side grills and drip rails. This is not a 66 hood with with holes for the emblem on the front right. I paid $2500, but will consider offers.
11-18-2012, 10:35 AM
#23
396-425HP Motors
I have two of these motors if anybody is looking for them.
3855962 block standard bore 4 bolt dated D-2-5 with front pad stamped T0527IF 5119689. It comes with the 3856208 heads bare and stock both dated C-26-5, 6223 standard crankshaft with new clevitte bearings, 8 inch harmonic balancer, dimple rods and oil pan $7500.
3855962 block standard bore dated E-27-5 with front pad stamped T0722IF with no vin. The heads are 3856208 dated in June and the motor is complete from heads down. $7500
330-770-2517 for any questions. I can supply pictures with an email address.
3855962 block standard bore 4 bolt dated D-2-5 with front pad stamped T0527IF 5119689. It comes with the 3856208 heads bare and stock both dated C-26-5, 6223 standard crankshaft with new clevitte bearings, 8 inch harmonic balancer, dimple rods and oil pan $7500.
3855962 block standard bore dated E-27-5 with front pad stamped T0722IF with no vin. The heads are 3856208 dated in June and the motor is complete from heads down. $7500
330-770-2517 for any questions. I can supply pictures with an email address.
12-19-2012, 12:05 PM
#26
Burning Brakes
Thread Starter
1965 396 Carb
03-13-2013, 10:52 PM
#30
Cruising
Member Since: Dec 2012
Location: Carlsbad CA
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
65 396 original cast iron thermostat housing w bolts no corrosion
03-23-2013, 12:06 PM
#31
Advanced
Maybe a list might help us at one time or another.
Guys working on or own 1965 396 Vettes
1. 65 396 (Cliff) from Colorado
2. Larry N. Johnson from Utah
3. TESTADURO from California
4. fiberglassjunkie (Wayne Soojian) from NM
5. Eric Voigt from Riverside, CA Image
6. billd1954 (Bill Donovan) from MA
7. Fairway-J (Jonathan) from IL
8. 66racer (Elmer Schuster) from New Mexico
9. jbalch (Jody Balch) from Clovis, NM
10. 65 BB Rat from ?
11. Blue 396 (Carl) from Texas
12. midstyle (Wayne Midkiff) from Calgary, Alberta Canada
13. RGS (Dick) from Iowa
14. Chuck Pelton from Michigan
15. woodsdesign (Lawrence S. Woods) from Macedonia, Ohio
16. FASTZ (Paul R. Zailey) from Ohio
17. nfran (Nick Francoforte) from Windermere FL
18. Mark Lovejoy from Bloomfield, Connecticut Image
19. JSieczkos (John Sieczkos) from Johnson City, NY
20. rovers2000 (Lance Roversw) from Chazy, NY
21. bill3302 from MA
22. 65747785 (Ben) from PA
23. SBR (Steve A. Bramati) from Illinois
24. revupL78 (Greg) from Lake Dale, Indiana
25. 65BB RAGTAP(Scott) from Louisville, Kentucky
26. gary6672 (Gary Cowans) from Perth,Western Australia
27. dplotkin Dan from New England silver convert see Avatar
28. ButtonHead (Rob) from? See here.
29. dahohan from 10th District Court, OHIO
30. Raymond G from ?
31. EddieG from Merritt Island, Florida
32. Tiros from Somewhere in NJ
33. tedbb65 from ?
34. DanielJ from ? see Image
35. thorson Jim Thorson from Grande Prairie, Alberta - See Image
36. pamotorman from PA? my 1965 396 corvette VIN 114271 was a st louis factory pick up on 4/16/65.
37. brettg Brett Guinta from Greenwich, CT
38. Mike 1958 from ?
39. johncorvette1965 from ?
40. Patman65 from ?
41. vetteking62 (Frank Semkow, Jr.) from Colchester, CT
42. BIG BLOCK JAMO (Paul B. Jamieson) from from Studio City, CA
43. 63vetteman (Tom Berardo) from Paramus NJ
44. gsouth (Gene South) from McKinney, Texas
Any others?
Guys working on or own 1965 396 Vettes
1. 65 396 (Cliff) from Colorado
2. Larry N. Johnson from Utah
3. TESTADURO from California
4. fiberglassjunkie (Wayne Soojian) from NM
5. Eric Voigt from Riverside, CA Image
6. billd1954 (Bill Donovan) from MA
7. Fairway-J (Jonathan) from IL
8. 66racer (Elmer Schuster) from New Mexico
9. jbalch (Jody Balch) from Clovis, NM
10. 65 BB Rat from ?
11. Blue 396 (Carl) from Texas
12. midstyle (Wayne Midkiff) from Calgary, Alberta Canada
13. RGS (Dick) from Iowa
14. Chuck Pelton from Michigan
15. woodsdesign (Lawrence S. Woods) from Macedonia, Ohio
16. FASTZ (Paul R. Zailey) from Ohio
17. nfran (Nick Francoforte) from Windermere FL
18. Mark Lovejoy from Bloomfield, Connecticut Image
19. JSieczkos (John Sieczkos) from Johnson City, NY
20. rovers2000 (Lance Roversw) from Chazy, NY
21. bill3302 from MA
22. 65747785 (Ben) from PA
23. SBR (Steve A. Bramati) from Illinois
24. revupL78 (Greg) from Lake Dale, Indiana
25. 65BB RAGTAP(Scott) from Louisville, Kentucky
26. gary6672 (Gary Cowans) from Perth,Western Australia
27. dplotkin Dan from New England silver convert see Avatar
28. ButtonHead (Rob) from? See here.
29. dahohan from 10th District Court, OHIO
30. Raymond G from ?
31. EddieG from Merritt Island, Florida
32. Tiros from Somewhere in NJ
33. tedbb65 from ?
34. DanielJ from ? see Image
35. thorson Jim Thorson from Grande Prairie, Alberta - See Image
36. pamotorman from PA? my 1965 396 corvette VIN 114271 was a st louis factory pick up on 4/16/65.
37. brettg Brett Guinta from Greenwich, CT
38. Mike 1958 from ?
39. johncorvette1965 from ?
40. Patman65 from ?
41. vetteking62 (Frank Semkow, Jr.) from Colchester, CT
42. BIG BLOCK JAMO (Paul B. Jamieson) from from Studio City, CA
43. 63vetteman (Tom Berardo) from Paramus NJ
44. gsouth (Gene South) from McKinney, Texas
Any others?
04-06-2013, 01:05 PM
#33
Navigator
Member Since: Apr 2013
Location: alanson MI
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
for sale 1958 283 2x4 $4,000.00
casting No.3756519
pad ID No. 1 3 122
date code j 5 8
This motor is running, solid lifters, dose not knock,
The heads are not original, the heads that came off the motor where 2x4 castings
I loaded pics to my album
casting No.3756519
pad ID No. 1 3 122
date code j 5 8
This motor is running, solid lifters, dose not knock,
The heads are not original, the heads that came off the motor where 2x4 castings
I loaded pics to my album
04-06-2013, 02:01 PM
#35
Race Director
1111093 ti distributors, dated 5M4, 6B7, 5M20 not correct for a 65 but the distributor is mid-year BB correct (have other ti distributors from my collection available), they all look as nice as the one below...your choice $1895.
05-05-2013, 03:07 PM
#36
Advanced
Member Since: Jun 2007
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
F/S 396 "208" Heads
Bare heads dated C-25-5 and D-16-5. 8 valves included. $2200 plus shipping. Call 916 485-8581 PST or email: rg396ray@aol.com
Last edited by Raymond G; 08-05-2013 at 01:35 PM.
06-13-2013, 11:23 PM
#39
Instructor
Member Since: Apr 2013
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
1100696 41 Amp. Alternator
Do any of you guys need an alternator numbered 1100696, 41 Amp.
It is in really good condition. It came on my 63 when I bought it back in 89.
The date is "5 F 14" or July 14, 1965.
The "5" is stamped really light, but can be read still.
I am asking $300.00. No need to kill you guys. I see them for twice that sometimes.
I will also trade for a 1100544, 61 Amp. 1972 Corvette built in April.
Nice of you guys to put this thread up for me to sell my alternator. lol
Watch out for Elmer the Schister. He will take your money.
It is in really good condition. It came on my 63 when I bought it back in 89.
The date is "5 F 14" or July 14, 1965.
The "5" is stamped really light, but can be read still.
I am asking $300.00. No need to kill you guys. I see them for twice that sometimes.
I will also trade for a 1100544, 61 Amp. 1972 Corvette built in April.
Nice of you guys to put this thread up for me to sell my alternator. lol
Watch out for Elmer the Schister. He will take your money.
Last edited by ClassicGlass63; 06-14-2013 at 12:55 AM.
08-05-2013, 01:34 PM
#40
Advanced
Member Since: Jun 2007
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
396 3124 Holley Carb
3124 carb dated 573 with correct bowls, $2000. Call 916 485-8581 or rg396ray@aol.com
