F/S Used suspension and drive line parts for C2
#1
Instructor
Thread Starter
F/S Used suspension and drive line parts for C2
I am selling suspension and drive line parts from a small block 65 coupe. Parts are used but in very good shape. Many have been bead blasted, painted and new rubber or joints installed.
* Lower A arms, blasted and painted with new Polly bushings and new ball joints. $250 for the set.
* Drive shaft blasted and painted with new U-Joints. $175
* Half shafts blasted and painted with new U-Jints. $175 for the set
* Differential blasted and painted with new heavy duty rear cover. 3.36 ratio. $500.
* Bell Housing with all clutch linkage and new rubber boot. $200.
* Rear suspension hardware bolt kit. New. Includes all bolts and hardware for complete rear suspension. Purchased for $150. Never used. Asking $80.
* New, never used - Mc Leod pressure plate, clutch disk, throwout bearing and pilot bushing. Still in boxes. Cost $600. Asking $300. 10 inch 10 spline for small block.
* FAN SHROUD HAS SOLD - Metal fan shroud for 65 small block. Bead blasted, not painted. $200.
Dejavet
* Lower A arms, blasted and painted with new Polly bushings and new ball joints. $250 for the set.
* Drive shaft blasted and painted with new U-Joints. $175
* Half shafts blasted and painted with new U-Jints. $175 for the set
* Differential blasted and painted with new heavy duty rear cover. 3.36 ratio. $500.
* Bell Housing with all clutch linkage and new rubber boot. $200.
* Rear suspension hardware bolt kit. New. Includes all bolts and hardware for complete rear suspension. Purchased for $150. Never used. Asking $80.
* New, never used - Mc Leod pressure plate, clutch disk, throwout bearing and pilot bushing. Still in boxes. Cost $600. Asking $300. 10 inch 10 spline for small block.
* FAN SHROUD HAS SOLD - Metal fan shroud for 65 small block. Bead blasted, not painted. $200.
Dejavet
Last edited by Dejavet; 02-01-2013 at 02:53 PM.
#4
Half shafts
Are the half shaft u-joins solid or grease fitting ? What brand u-joint ?
Does it include the flanges ?
Thanks
David
BTW, email me directly if you want dd@mylakeemail.com
Last edited by ddent01; 01-10-2015 at 01:34 PM. Reason: old ad
#5
I am selling suspension and drive line parts from a small block 65 coupe. Parts are used but in very good shape. Many have been bead blasted, painted and new rubber or joints installed.
* Lower A arms, blasted and painted with new Polly bushings and new ball joints. $250 for the set.
* Drive shaft blasted and painted with new U-Joints. $175
* Half shafts blasted and painted with new U-Jints. $175 for the set
* Differential blasted and painted with new heavy duty rear cover. 3.36 ratio. $500.
* Bell Housing with all clutch linkage and new rubber boot. $200.
* Rear suspension hardware bolt kit. New. Includes all bolts and hardware for complete rear suspension. Purchased for $150. Never used. Asking $80.
* New, never used - Mc Leod pressure plate, clutch disk, throwout bearing and pilot bushing. Still in boxes. Cost $600. Asking $300. 10 inch 10 spline for small block.
* FAN SHROUD HAS SOLD - Metal fan shroud for 65 small block. Bead blasted, not painted. $200.
Dejavet
* Lower A arms, blasted and painted with new Polly bushings and new ball joints. $250 for the set.
* Drive shaft blasted and painted with new U-Joints. $175
* Half shafts blasted and painted with new U-Jints. $175 for the set
* Differential blasted and painted with new heavy duty rear cover. 3.36 ratio. $500.
* Bell Housing with all clutch linkage and new rubber boot. $200.
* Rear suspension hardware bolt kit. New. Includes all bolts and hardware for complete rear suspension. Purchased for $150. Never used. Asking $80.
* New, never used - Mc Leod pressure plate, clutch disk, throwout bearing and pilot bushing. Still in boxes. Cost $600. Asking $300. 10 inch 10 spline for small block.
* FAN SHROUD HAS SOLD - Metal fan shroud for 65 small block. Bead blasted, not painted. $200.
Dejavet
#6
Im interesting in the rear differential. Please send me pm if still available. I would also be interested in the rear hardware kit
warrenmcauley@sasktel.net
warrenmcauley@sasktel.net
Last edited by 64con; 07-25-2015 at 05:09 PM.