F/S 55 56 57 58 Water Pump Heater Hose Nipple Fitting 3133186
#1
F/S 55 56 57 58 Water Pump Heater Hose Nipple Fitting 3133186
I am selling a brand new NOS water pump heater hose nipple fitting for 1955 1956 1957 and 1958 Corvettes.
This is the special curved or bent water pump heater hose fitting that was used on Corvette water pumps so that the heater hose will miss or clear the fan belt.
This is an original forged steel 3/8" NPT curved fitting for the 5/8" heater hose used on '55 thru '58 Corvette's.
This is not a Chinese copy made from thin stamped steel tubing that some reproduction parts suppliers are selling.
Chevrolet / GM part number 3133186
Selling for $25 plus $8 postage for the lower 48.
This is the special curved or bent water pump heater hose fitting that was used on Corvette water pumps so that the heater hose will miss or clear the fan belt.
This is an original forged steel 3/8" NPT curved fitting for the 5/8" heater hose used on '55 thru '58 Corvette's.
This is not a Chinese copy made from thin stamped steel tubing that some reproduction parts suppliers are selling.
Chevrolet / GM part number 3133186
Selling for $25 plus $8 postage for the lower 48.
Last edited by QIK59; 08-24-2015 at 06:12 PM. Reason: Postage price added
#2
i am selling a brand new nos water pump heater hose nipple fitting for 1955 1956 1957 and 1958 corvettes.
This is the special curved or bent water pump heater hose fitting that was used on corvette water pumps so that the heater hose will miss or clear the fan belt.
This is an original forged steel 3/8" npt curved fitting for the 5/8" heater hose used on '55 thru '58 corvette's.
This is not a chinese copy made from thin stamped steel tubing that some reproduction parts suppliers are selling.
Please note there is some tarnish or discoloration present after 60 years of storage.
Chevrolet / gm part number 3133186
selling for $25 plus postage.
This is the special curved or bent water pump heater hose fitting that was used on corvette water pumps so that the heater hose will miss or clear the fan belt.
This is an original forged steel 3/8" npt curved fitting for the 5/8" heater hose used on '55 thru '58 corvette's.
This is not a chinese copy made from thin stamped steel tubing that some reproduction parts suppliers are selling.
Please note there is some tarnish or discoloration present after 60 years of storage.
Chevrolet / gm part number 3133186
selling for $25 plus postage.
Last edited by QIK59; 08-24-2015 at 06:08 PM.
#3
Drifting
#4