F/S 1966 Valve Cover w/o Casting Flaw
#1
Pro
Thread Starter
F/S: Orig 1966 Valve Covers w/o Casting Flaw #3767493
Nice original pair of Corvette 7-Fin aluminum valve covers. Clean inside and out with no deformities (bends, warps). They do not have the casting flaw across the "O" in "Corvette". Correct for pre March 66 cars but fits through '67 as well, as I understand it from Corvette data.
OEM casting number as seen in the photo is #3767493, and they have the original Lester casting stamp inside the covers as well, proving these are not reproduction parts.
Small ding on the edge that does not affect any sealing capability once a valve cover gasket is in place.
If you need any other info let me know via PM.
$95.00
Will ship for $20.00 or you can pick them up locally.
Thanks
OEM casting number as seen in the photo is #3767493, and they have the original Lester casting stamp inside the covers as well, proving these are not reproduction parts.
Small ding on the edge that does not affect any sealing capability once a valve cover gasket is in place.
If you need any other info let me know via PM.
$95.00
Will ship for $20.00 or you can pick them up locally.
Thanks
Last edited by LGK-SD; 01-04-2016 at 02:32 PM.
The following users liked this post:
LGK-SD (01-04-2016)
#3
Melting Slicks
Nice original pair of Corvette 7-Fin aluminum valve covers. Clean inside and out with no deformities (bends, warps). They do not have the casting flaw across the "O" in "Corvette". Correct for pre March 66 cars but fits through '67 as well, as I understand it from Corvette data.
OEM casting number as seen in the photo is #3767493, and they have the original Lester casting stamp inside the covers as well, proving these are not reproduction parts.
Small ding on the edge that does not affect any sealing capability once a valve cover gasket is in place.
If you need any other info let me know via PM.
$95.00
Will ship for $20.00 or you can pick them up locally.
Thanks
OEM casting number as seen in the photo is #3767493, and they have the original Lester casting stamp inside the covers as well, proving these are not reproduction parts.
Small ding on the edge that does not affect any sealing capability once a valve cover gasket is in place.
If you need any other info let me know via PM.
$95.00
Will ship for $20.00 or you can pick them up locally.
Thanks
#4
Pro
Thread Starter
#7
Le Mans Master
for sure, at 2016 prices.