WTB: 67 Wire Loom Supports
04-05-2017, 11:45 AM
#1
Drifting
Thread Starter
67 Wire Loom Supports
I am looking for original 1967 wire loom supports that are on the firewall. (The little black plastic belt-looking ties.)
Only interested in originals in great condition. The correct ties are five (5) inches total length end to end, .047-.049" thick and .385" wide. There are six (6) on the firewall but I would buy any that you might have.
Thanks,
nine79four82zero805
michael (dot) sabrsula (at) comcast (dot) net
Only interested in originals in great condition. The correct ties are five (5) inches total length end to end, .047-.049" thick and .385" wide. There are six (6) on the firewall but I would buy any that you might have.
Thanks,
nine79four82zero805
michael (dot) sabrsula (at) comcast (dot) net
Last edited by mgsabrsula; 05-08-2017 at 08:07 PM. Reason: added dimensions.
04-05-2017, 02:05 PM
#2
Mike,
There are supposed to be a total of 6, with three being on each side of the distributor. Their location is typical. I will try and shoot you some pictures of known original cars and their location this weekend....but it will be hectic as my Dad and I will be at Barrett all weekend. I will get them to you. Regards. ARA
There are supposed to be a total of 6, with three being on each side of the distributor. Their location is typical. I will try and shoot you some pictures of known original cars and their location this weekend....but it will be hectic as my Dad and I will be at Barrett all weekend. I will get them to you. Regards. ARA
04-13-2017, 07:00 PM
#10
Drifting
Thread Starter