C1 and C2 Corvette Exterior Parts For Sale At RPI Designs
#1
Platinum Supporting Vendor
Thread Starter
C1 and C2 Corvette Exterior Parts For Sale At RPI Designs
Keeping the trim looking its best on your Corvette can be a challenge. If any part is scratched or missing it really takes away from the total appearance of your car. Our reproduction Corvette trim will help you keep your car looking showroom new for years to come.
1958-1962 C1 Corvette Emblem Bezel $41.79 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...-emblem-bezel/
1958-1961 C1 Corvette Emblem Backplate $29.44 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...lem-backplate/
1961 C1 Corvette Front Fender Side Bars Set $74.09 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...side-bars-set/
1961 C1 Corvette Nose Emblem $46.54 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...e-nose-emblem/
1958-1962 C1 Corvette Gold Front Or Rear Emblem $70.29 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...r-rear-emblem/
1953-1955 C1 Corvette Nose Emblem Assembly $117.79 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...blem-assembly/
1956-1957 C1 Corvette Emblem Assembly Fits Nose Or Trunk $51.29 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...nose-or-trunk/
1961-1962 C1 Corvette Nose Letters $56.04 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...-nose-letters/
1962 C1 Corvette Front Fender Fuel Injection Emblems $75.99 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ction-emblems/
1958-1962 C1 Corvette Front Fender Cross Flags Emblems $75.99 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...flags-emblems/
1962-1963 C1 Corvette Front Fender Cross Flags Emblems (Early 1963) $59.84 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ms-early-1963/
1956-1957 C1 Corvette Front Or Rear Emblem Bezel $39.89 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...-emblem-bezel/
1958-1961 C1 Corvette Front Or Rear Emblem Bezel Assembly $119.69 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ezel-assembly/
1958-1962 C1 Corvette Emblem Bezel $41.79 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...-emblem-bezel/
1958-1961 C1 Corvette Emblem Backplate $29.44 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...lem-backplate/
1961 C1 Corvette Front Fender Side Bars Set $74.09 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...side-bars-set/
1961 C1 Corvette Nose Emblem $46.54 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...e-nose-emblem/
1958-1962 C1 Corvette Gold Front Or Rear Emblem $70.29 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...r-rear-emblem/
1953-1955 C1 Corvette Nose Emblem Assembly $117.79 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...blem-assembly/
1956-1957 C1 Corvette Emblem Assembly Fits Nose Or Trunk $51.29 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...nose-or-trunk/
1961-1962 C1 Corvette Nose Letters $56.04 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...-nose-letters/
1962 C1 Corvette Front Fender Fuel Injection Emblems $75.99 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ction-emblems/
1958-1962 C1 Corvette Front Fender Cross Flags Emblems $75.99 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...flags-emblems/
1962-1963 C1 Corvette Front Fender Cross Flags Emblems (Early 1963) $59.84 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ms-early-1963/
1956-1957 C1 Corvette Front Or Rear Emblem Bezel $39.89 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...-emblem-bezel/
1958-1961 C1 Corvette Front Or Rear Emblem Bezel Assembly $119.69 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ezel-assembly/
__________________
RPI DESIGNS, LLC. - C5/C6/C7 Corvette Parts
4000+ C5/C6/C7 Parts & accessories - Forum members get 10% off with SS2007 coupon at checkout
Like us on www.facebook.com/rpidesigns and you might win $100.
Our brand new C7 Corvette Z06 Style Side Skirts come painted in Carbon Flash Metallic, see them here!
email: rpi.designs.customerservice@gmail.com Web: www.rpidesigns.com
RPI DESIGNS, LLC. - C5/C6/C7 Corvette Parts
4000+ C5/C6/C7 Parts & accessories - Forum members get 10% off with SS2007 coupon at checkout
Like us on www.facebook.com/rpidesigns and you might win $100.
Our brand new C7 Corvette Z06 Style Side Skirts come painted in Carbon Flash Metallic, see them here!
email: rpi.designs.customerservice@gmail.com Web: www.rpidesigns.com
#2
Platinum Supporting Vendor
Thread Starter
1962 C1 Corvette Gold Rear Emblem Assembly $126.34 With code PHIL5 At Checkout
Notes:
Assembly Includes: #0722 Gold Emblem #0094 Gasket
#0092 Emblem Bezel #26611 Backplate-Black
https://www.rpidesigns.com/shop/item...blem-assembly/
1953-1955 C1 Corvette Chevrolet Side Script Emblem $205.19 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...script-emblem/
1955 C1 Corvette Side Script Gold V Emblems $211.84 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ld-vs-emblems/
1957 C1 Corvette Front Fender Crossflag Fuel Injection Emblems $94.04 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ction-emblems/
1958-1961 C1 Corvette Side Fuel Injection Script Emblem $88.34 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...script-emblem/
Notes:
Assembly Includes: #0722 Gold Emblem #0094 Gasket
#0092 Emblem Bezel #26611 Backplate-Black
https://www.rpidesigns.com/shop/item...blem-assembly/
1953-1955 C1 Corvette Chevrolet Side Script Emblem $205.19 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...script-emblem/
1955 C1 Corvette Side Script Gold V Emblems $211.84 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ld-vs-emblems/
1957 C1 Corvette Front Fender Crossflag Fuel Injection Emblems $94.04 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ction-emblems/
1958-1961 C1 Corvette Side Fuel Injection Script Emblem $88.34 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...script-emblem/
#3
Platinum Supporting Vendor
Thread Starter
1956-1961 C1 Corvette Upper Door Side Moldings $42.74 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...side-moldings/
1956-1961 C1 Corvette Door Lower Moldings $42.74 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ower-moldings/
1956-1961 C1 Corvette Fender Lower Moldings $42.74 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ower-moldings/
1956-1961 C1 Corvette Door End Moldings $19.94 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...-end-moldings/
1958-1962 C1 Fender Top Moldings Polished Stainless Steel $263.14 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ss-steel-0180/
https://www.rpidesigns.com/shop/item...side-moldings/
1956-1961 C1 Corvette Door Lower Moldings $42.74 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ower-moldings/
1956-1961 C1 Corvette Fender Lower Moldings $42.74 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ower-moldings/
1956-1961 C1 Corvette Door End Moldings $19.94 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...-end-moldings/
1958-1962 C1 Fender Top Moldings Polished Stainless Steel $263.14 With Code PHIL5 At Checkout
https://www.rpidesigns.com/shop/item...ss-steel-0180/
#4
Platinum Supporting Vendor
Thread Starter
1958-1960 Corvette Metal Exhaust Tunnel In Rear Body Left or Right $46.97 With Code PHIL5 At Checkout.
Left: https://www.rpidesigns.com/shop/item...ear-body-left/
Right: https://www.rpidesigns.com/shop/item...ar-body-right/
1956-1957 C1 Corvette Exhaust Chrome Rear Upper $64.89 With Code PHIL5 At Checkout.
https://www.rpidesigns.com/shop/item...me-rear-upper/
1956-1957 C1 Corvette Exhaust Chrome Rear Bezel $107.21 With Code PHIL5 At Checkout.
https://www.rpidesigns.com/shop/item...me-rear-bezel/
1956-1957 C1 Corvette Exhaust Chrome Rear Lower $130.72 With Code PHIL5 At Checkout.
https://www.rpidesigns.com/shop/item...me-rear-lower/
Left: https://www.rpidesigns.com/shop/item...ear-body-left/
Right: https://www.rpidesigns.com/shop/item...ar-body-right/
1956-1957 C1 Corvette Exhaust Chrome Rear Upper $64.89 With Code PHIL5 At Checkout.
https://www.rpidesigns.com/shop/item...me-rear-upper/
1956-1957 C1 Corvette Exhaust Chrome Rear Bezel $107.21 With Code PHIL5 At Checkout.
https://www.rpidesigns.com/shop/item...me-rear-bezel/
1956-1957 C1 Corvette Exhaust Chrome Rear Lower $130.72 With Code PHIL5 At Checkout.
https://www.rpidesigns.com/shop/item...me-rear-lower/
#5
Platinum Supporting Vendor
Thread Starter
1963-1967 C2 Corvette Tail Lights Assembly Package $223.24 With Code PHIL5 At Checkout
Our 1963-1967 C2 Corvette Tail Lights Assembly Package is a great reproduction set to make any C2 Corvette come back to life. Our tail lamp package includes all four light assemblies. We do not include the reverse lights in this package. This 1963-1967 C2 Corvette Tail Lights Assembly Package is correct and accurate reproductions.
https://www.rpidesigns.com/shop/item...embly-package/
1963-1967 C2 Corvette Tail Lights Assembly Package
1965 C2 Corvette Gas Lid Emblem $42.74 With Code PHIL5 At Checkout
Keeping the trim looking its best on your Corvette can be a challenge. If any part is scratched or missing it really takes away from the total appearance of your car. Our reproduction 1965 C2 Corvette Gas Lid Emblem will help you keep your car looking showroom new for years to come.
https://www.rpidesigns.com/shop/item...as-lid-emblem/
1965 C2 Corvette Gas Lid Emblem
1963-1966 C2 Corvette Antenna Cable With Correct Nut $25.34 With Code PHIL5 At Checkout
RPI Designs is offering this replacement antenna cable for your 1963-1966 C2 Corvette. 159 inches in length and has the correct machine serrated nut.
https://www.rpidesigns.com/shop/item...antenna-cable/
1963-1966 C2 Corvette Antenna Cable With Correct Nut
1963-1967 C2 Corvette Front Crossmember Lower Dent Repair Tool $141.02 With Code PHIL5 At Checkout
RPI Designs carries this 1963-1967 C2 Corvette Front Crossmember Lower Dent Repair Tool that fixes a very common problem with these cars; damaged or dented front lower cross members.
https://www.rpidesigns.com/shop/item...t-repair-tool/
1963-1967 C2 Corvette Front Crossmember Lower Dent Repair Tool
1963-1967 C2 Corvette Front Window Run Channel Coupe or Convertible $46.08 With Code PHIL5 At Checkout
This 1963-1967 C2 Corvette Front Window Run Channel is the next best thing to the original. Manufactured in the U.S.A. Made to OEM specifications to produce exact reproductions with the correct look and fit for your Corvette.
Coupe: https://www.rpidesigns.com/shop/item...channel-coupe/
Convertiblehttps://www.rpidesigns.com/shop/item...l-convertible/
1963-1967 C2 Corvette Front Window Run Channel
1967 C2 Corvette 427 Hood Scoop Grille $93.09 With Code PHIL5 At Checkout
Keeping the trim looking its best on your Corvette can be a challenge. If any part is scratched or missing it really takes away from the total appearance of your car. Our reproduction 1967 C2 Corvette Hood Grille 396/427 Passengers Side will help you keep your car looking showroom new for years to come.
Unique to the 1967 C2 Corvette our 427 hood scoop grill is a phenomenal reproduction piece. This hood scoop grill comes complete with all attaching hardware which includes screws nuts and speed nuts for a very quick and easy installation. This piece is often overlooked or missing on many 1967's.
https://www.rpidesigns.com/shop/item...-scoop-grille/
1967 C2 Corvette 427 Hood Scoop Grille
Our 1963-1967 C2 Corvette Tail Lights Assembly Package is a great reproduction set to make any C2 Corvette come back to life. Our tail lamp package includes all four light assemblies. We do not include the reverse lights in this package. This 1963-1967 C2 Corvette Tail Lights Assembly Package is correct and accurate reproductions.
https://www.rpidesigns.com/shop/item...embly-package/
1963-1967 C2 Corvette Tail Lights Assembly Package
1965 C2 Corvette Gas Lid Emblem $42.74 With Code PHIL5 At Checkout
Keeping the trim looking its best on your Corvette can be a challenge. If any part is scratched or missing it really takes away from the total appearance of your car. Our reproduction 1965 C2 Corvette Gas Lid Emblem will help you keep your car looking showroom new for years to come.
https://www.rpidesigns.com/shop/item...as-lid-emblem/
1965 C2 Corvette Gas Lid Emblem
1963-1966 C2 Corvette Antenna Cable With Correct Nut $25.34 With Code PHIL5 At Checkout
RPI Designs is offering this replacement antenna cable for your 1963-1966 C2 Corvette. 159 inches in length and has the correct machine serrated nut.
https://www.rpidesigns.com/shop/item...antenna-cable/
1963-1966 C2 Corvette Antenna Cable With Correct Nut
1963-1967 C2 Corvette Front Crossmember Lower Dent Repair Tool $141.02 With Code PHIL5 At Checkout
RPI Designs carries this 1963-1967 C2 Corvette Front Crossmember Lower Dent Repair Tool that fixes a very common problem with these cars; damaged or dented front lower cross members.
https://www.rpidesigns.com/shop/item...t-repair-tool/
1963-1967 C2 Corvette Front Crossmember Lower Dent Repair Tool
1963-1967 C2 Corvette Front Window Run Channel Coupe or Convertible $46.08 With Code PHIL5 At Checkout
This 1963-1967 C2 Corvette Front Window Run Channel is the next best thing to the original. Manufactured in the U.S.A. Made to OEM specifications to produce exact reproductions with the correct look and fit for your Corvette.
Coupe: https://www.rpidesigns.com/shop/item...channel-coupe/
Convertiblehttps://www.rpidesigns.com/shop/item...l-convertible/
1963-1967 C2 Corvette Front Window Run Channel
1967 C2 Corvette 427 Hood Scoop Grille $93.09 With Code PHIL5 At Checkout
Keeping the trim looking its best on your Corvette can be a challenge. If any part is scratched or missing it really takes away from the total appearance of your car. Our reproduction 1967 C2 Corvette Hood Grille 396/427 Passengers Side will help you keep your car looking showroom new for years to come.
Unique to the 1967 C2 Corvette our 427 hood scoop grill is a phenomenal reproduction piece. This hood scoop grill comes complete with all attaching hardware which includes screws nuts and speed nuts for a very quick and easy installation. This piece is often overlooked or missing on many 1967's.
https://www.rpidesigns.com/shop/item...-scoop-grille/
1967 C2 Corvette 427 Hood Scoop Grille
Last edited by RPI Designs; 04-05-2018 at 03:39 PM.
#6
Platinum Supporting Vendor
Thread Starter
1963-1964 C2 Corvette Knock Off Wheel Set Replica Style - Complete $2,199.99
It's not necessarily difficult to find 1963 – 1964 C2 Corvette knockoff wheels, but it is rather difficult to find a set that is correct and accurate. If you have a driver you really are worried about being correct authentic you will probably be able to find a set of cheaper quality reproductions, however, quality counts you're going for the most points then look no further than these hundred percent correct replica wheels.If you are looking for wheels for your 19663-1964 Corvette don't bother looking through miles of swap meet isles or hours scanning the internet. We have these brand new reproduction wheels that will bring a showroom shine to your Corvette. Widely recognized as the most beautiful wheels ever produced for Corvettes, Corvette America now brings you these 1963-1964 Replica Bolt-On Wheels that capture the true essence of the Kelsey Hayes manufactured originals. With the help of numerous Corvette Restoration experts and NCRS judges, we have completely retooled our 1963-1964 Knock Off Wheels. In addition to the wheels themselves, all mounting hardware is made like their original counterparts and install just like they did too. Best of all, we bring them to you at a fraction of the cost you would pay for a set of used original 1963-1964 wheels in good condition.
These are the most accurate 1963-1964 Corvette Knock-Off wheels. Great time and effort have been taken to replicate these wheels to exact specifications and standards of the originals. If you want accuracy and you want correct these are what you will want, if you have a daily driver you might find lesser expensive alternatives on the market but they will not be as accurate as these.
Sets include Our complete sets feature 4 Original Style Knockoff Wheels, all of the original style hardware, including lug nuts, needed to install the wheels, and even a reproduction lead hammer for a safe and accurate installation. Complete installation instructions also included.
All Corvette America 1963-1964 Bolt-On Wheel Hardware is interchangeable with the hardware originally supplied from the factory.
Fitment: 1963, 1964 C2 Corvette
https://www.rpidesigns.com/shop/item...tyle-complete/
#7
Platinum Supporting Vendor
Thread Starter
1963-1967 C2 Corvette Front Window Run Channel Coupe $48.51
This 1963-1967 C2 Corvette Front Window Run Channel Coupe is the next best thing to the original. Manufactured in the U.S.A. Made to OEM specifications to produce exact reproductions with the correct look and fit for your Corvette.Fitment: 1963, 1964, 1965, 1966, 1967 C2 Corvette
https://www.rpidesigns.com/shop/item...channel-coupe/
1963-1967 C2 Corvette Front Window Run Channel Convertible $48.51
This Front Window Run Channel for Convertible is the next best thing to the original. Manufactured in the U.S.A. Made to OEM specifications to produce exact reproductions with the correct look and fit for your Corvette. Curved with holes like original, with mounting kit.Fitment: 1963, 1964, 1965, 1966, 1967 C2 Corvette
https://www.rpidesigns.com/shop/item...l-convertible/
1963-1964 C2 Corvette Grille Moulding Lower Center $83.16
Over time your 1963-1964 C2 Corvette is bound to start fading in certain areas. The good news is that RPI Designs is here to help and has all of the top quality restoration parts for your C2 Corvette. This Grille Moulding Lower Center is a proper reproduction to provide you a correct and accurate restoration on your Corvette.Fitment: 1963, 1964 C2 Corvette
https://www.rpidesigns.com/shop/item...-lower-center/
1963-1967 C2 Corvette Weatherstrip Coupe Door on Body Pair $108.85
Our Weatherstrip Coupe Door on Body Pair for your 1963-1967 C2 Corvette is not only priced right but is also correct and accurate for a proper restoration on your Corvette. Designed from original pieces, this Weatherstrip Coupe Door on Body Pair will bring your Corvette back to its original beauty. Superb quality, proper fitting 1963-1967 coupe door on body weatherstrip - not the current GM reissue.Fitment: 1963, 1964, 1965, 1966, 1967 C2 Corvette
https://www.rpidesigns.com/shop/item...-on-body-pair/
1963-1964 C2 Corvette Antenna Manual Assembly $59.99
This factory correct antenna assembly for your C2 Corvette is a complete assembly ready to bolt on to your car. This is a great way to finish up your restoration.Fitment: 1963, 1964 C4 Corvette
https://www.rpidesigns.com/shop/item...nual-assembly/
1961-1962 C1 Corvette Antenna Assembly W/Hardware
https://www.rpidesigns.com/shop/item...enna-assembly/
1956-1958 C1 Corvette Antenna Assembly With Hardware No Rings on Mast
1956-1958 C1 Corvette Antenna Assembly With Hardware No Rings on Mast. Correct push down type mast, same as the original.Fitment: 1956, 1957, 1958 Early C1 Corvette
https://www.rpidesigns.com/shop/item...ware-no-rings/
Last edited by RPI Designs; 06-17-2019 at 01:03 PM.
#8
Platinum Supporting Vendor
Thread Starter
1965 C2 Corvette Grille $590.73 With Code PHIL5
This 1965 C2 Corvette Grille is the next best thing to the original. Manufactured in the U.S.A. Made to OEM specifications to produce exact reproductions with the correct look and fit for your Corvette.Fitment: 1965 C2 Corvette
https://www.rpidesigns.com/shop/item...rvette-grille/1967 C2 Corvette Hood Grille 427 Big Block $68.19 With Code PHIL5
Our Hood Grille for 427 Big Block for your 1967 C2 Corvette is not only priced right but is also correct and accurate for a proper restoration on your Corvette. Designed from original pieces, this Hood Grille will bring your Corvette back to it's original beauty. Mounting Hardware sold separately.Fitment: 1967 C2 Corvette
https://www.rpidesigns.com/shop/item...427-big-block/
#9
Platinum Supporting Vendor
Thread Starter
1958-1960 C1 Corvette License Light Retainer Nut Plate Pair
1958-1960 C1 Corvette License Light Retainer Nut Plate Pair $31.63
Our License Light Retainer Nut Plate Pair for your 1958-1960 C1 Corvette is not only priced right but is also correct and accurate for a proper restoration on your Corvette. Designed from original pieces, this License Light Retainer Nut Plate Pair will help bring your Corvette back to it's original new condition. Attaches to rear bumper.Fitment: 1958, 1959, 1960 C1 Corvette
https://www.rpidesigns.com/shop/item...ut-plate-pair/
#10
Platinum Supporting Vendor
Thread Starter
1955-1957 C1 Corvette Parking Light Assembly Pair
1955-1957 C1 Corvette Parking Light Assembly Pair $236.64 With Code PHIL5 At Checkout
Our Parking Light Assembly Pair for your 1955-1957 C1 Corvette is not only priced right but is also correct and accurate for a proper restoration on your Corvette. Designed from original pieces, this Parking Light Assembly Pair will help bring your Corvette back to its original new condition. Includes 1955-1957 Parking Lamp Housing with Wire 491095 1953-1957 Parking Lamp Lens Bezel 491093 1953-1957 Parking Lamp U-Bracket 491097 1953-1962 Parking Lamp Lens with Gaskets 371101 1953-1957 Parking Lamp to Body Gasket 491096 1953-1957 Park Lamp Bezel Barrel Nut.Fitment: 1955, 1956, 1957 C1 Corvette
https://www.rpidesigns.com/shop/item...assembly-pair/
#11
Platinum Supporting Vendor
Thread Starter
Corvette C2 1963-1967 Coupe Lower Corner Window Moulding
Corvette C2 1963-1967 Coupe Lower Corner Window Moulding $81.60 With Code PHIL5 At Checkout
The fuzzy pad on this moulding frequently wears out and will start to scratch your window glass. Don't let that happen to you. Our 1963-1967 Corvette coupe lower corner molding has the small fuzzy material to protect your side window glass.Fitment: 1963, 1964, 1965, 1966, 1967 Corvette
https://www.rpidesigns.com/shop/item...ow-moulding--/
#12
Platinum Supporting Vendor
Thread Starter
1953-1967 C1-C2 Corvette Coverking Satin Stretch Car Cover
1953-1967 C1-C2 Corvette CoverKing Satin Stretch Car Cover
There are many options when it comes to an indoor car cover for your C1 Corvette. Perhaps the best quality and value is the CoverKing Satin Stretch. This car cover uses a heavy satin material that is great for any indoor use. With the ultra-soft fleece er you will not have to worry about getting scratches in your Corvettes paint. The fabric is heavy enough that it will not let dust through the cover and onto your Corvette yet light enough to let your car breath. CoverKing gives you many color options to choose, even two-tone options. Below we've built a configurator that allows you to build your own cover, to your specifications.C1 Corvette https://www.rpidesigns.com/shop/item...tch-car-cover/
C2 Corvette https://www.rpidesigns.com/shop/item...tch-car-cover/
Indoor Satin Stretch C1-C2 Corvette CoverKing Car Cover
This car cover is built to the highest quality standards. You can customize colors for base, sides, mirrors, thread, and piping, plus racing stripes!. Made from form-fitting lycra fabric Ultra-plush fleece liner to pamper your car's finish. Designed for indoor use only. Elasticized edges keep dirt and dust out and off the cars painted surface.Coverking's Satin Stretch indoor car cover provides superior protection for your Corvette from dirt, dust, nicks, bumps, and scratches. Made with an elastic synthetic fabric, the cover stretches in all directions and molds to the contours of your Corvette to highlight its design. The cover includes a unique fleece lining allowing for a soft enclosure all around.
Each CoverKing Satin Stretch cover is made with your specific vehicle in mind including mirror and antenna pockets to create a complete custom fit. This cover is meant for indoor use only and not intended for outdoor exposure.
- Indoor use only
- Matching mirror and antenna pockets included
- Made of form-fitting lycra fabric
- Elasticized edges keep dirt and dust out
- Available in multiple colors
- Made from soft synthetic fabric and a fleece lining for double protection
- Three-piece construction using blind stitching to hide all seams
- Custom-fit to mold to the exact specifications of your Vehicle
- No straps or tie-downs needed to secure the cover
- Custom-fit to mold to the exact specifications of your Vehicle
- Three-piece construction using blind stitching to hide all seams
- Made from soft synthetic fabric and a fleece lining for double protection
- Available in multiple colors
- Elasticized edges keep dirt and dust out
- Made of form-fitting lycra fabric
- Matching mirror and antenna pockets included
Like a fine suit, your cover is made to fit the curves and features of your vehicle. Our designers spent time with your model vehicle and used 3D scanners to record every compound, curve, and detail. That data is used to create a world-class cover with the fewest seams possible. Custom mirror and antenna pockets are sewn in to allow the cover to rest perfectly on your vehicle’s exterior.
THE COVERKING ADVANTAGE
Coverking designs its own fabrics and works with the world’s leading textile mills to handle manufacturing. With quality assurance teams dedicated to checking every batch of fabric, Coverking ensures that the material used in our products meet the most stringent assessments. We check to see if our material is breathable, allowing for the proper release of moisture. We exposed our fabrics to intense UV rays to make sure our fabrics do not fade over time. We go through a series of stress test to make sure the materials hold up for everyday conditions. Above all, our covers are checked before reaching our customer to ensure quality.
Fitment: 1953, 1954, 1955, 1956, 1958, 1959, 1960, 1961, 1962 1963, 1964, 1965, 1966, 1967 C1-C2 Corvette
#13
Platinum Supporting Vendor
Thread Starter
1953-1967 Corvette Upper Outer Spindle Pin Kit
1953-1967 Corvette Upper Outer Spindle Pin Kit $46.07 With Code PHIL5 At Checkout
If the handling of your 1953 through 1982 Corvette is not as good as it once was or you are hearing a clunk in the front and it may be time to replace your upper outer spindle pin. This pin attaches to the upper A-arm and is the mounting point for your steering spindle. If this becomes loose or worn aching cause your Corvette no longer steers as well as it once did and he can also damage other suspension parts like the spindle or upper A-arm. Our reproduction upper spindle pin is a perfect copy of the original for a perfect fit and finish. This part is made with better materials in your original so you will never have to replace it again. This upper spindle pin also includes a grease fitting for easy maintenance in the future. Keeping the suspension of your Corvette in top condition is important for the enjoyment and safety of your Corvette this upper spindle pin will get your car back on the road's quickly and driving like it did when it was brand-new.
FITMENT: 1953, 1954, 1956, 1957, 1958, 1959, 1960, 1961, 1962 C1 CORVETTE
FITMENT: 1963, 1964, 1965, 1966, 1967 C2 CORVETTE
#14
Platinum Supporting Vendor
Thread Starter
1958-1961 C1 Corvette Side Fuel Injection Script Emblem
1958-1961 C1 Corvette Side Fuel Injection Script Emblem $89.27 With Code PHIL5 At Checkout
Keeping the trim looking its best on your Corvette can be a challenge. If any part is scratched or missing it really takes away from the total appearance of your car. Our reproduction 1958-1961 C1 Corvette Side Fuel Injection Script Emblem will help you keep your car looking showroom-new for years to come.Fitment: 1958, 1959, 1960, 1961 C1 Corvette
https://www.rpidesigns.com/shop/item...script-emblem/
#15
Platinum Supporting Vendor
Thread Starter
1963-1964 C2 Corvette Rear Spindle With Correct Nut and Studs
1963-1964 C2 Corvette Reproduction Rear Spindle With Correct Nut and Studs $175.00
This made in the U.S.A. reproduction 1963-1964 C2 Corvette Reproduction Rear Spindle With Correct Nut and Studs is exactly what you need to restore your C2 Corvette to original new condition. This spindle will fit and perform exactly as the original part and is sure to provide years of durability.Fitment: 1963, 1964 C2 Corvette
https://www.rpidesigns.com/shop/item...nut-and-studs/
#16
Platinum Supporting Vendor
Thread Starter
1962 C1 Corvette Gold Rear Emblem Assembly
1962 C1 Corvette Gold Rear Emblem Assembly $132.99
Keeping the trim looking its best on your Corvette can be a challenge. If any part is scratched or missing it really takes away from the total appearance of your car. Our reproduction 1962 C1 Corvette Gold Rear Emblem Assembly will help you keep your car looking showroom new for years to come.Notes:
Assembly Includes: #0722 Gold Emblem #0094 Gasket
#0092 Emblem Bezel #26611 Backplate-Black
Fitment: 1962 C1 Corvette
https://www.rpidesigns.com/shop/item...blem-assembly/
#17
Platinum Supporting Vendor
Thread Starter
1956-1962 C1 Corvette Window Seal Felt Inner And Outer 4 Pieces
1956-1962 C1 Corvette Window Seal Felt Inner And Outer 4 Pieces $87.07
Even a Corvette will need parts replaced or repaired over the years of wear and tear. RPI Designs has a great selection of restoration parts for your 1956-1962 C1 Corvette. This Window Seal Felt Inner And Outer 4 Pieces is a great quality reproduction that will help bring your Corvette back to it's original state. Has correct large bead.Fitment: 1956, 1957, 1958, 1959, 1960, 1961, 1962 C1 Corvette
https://www.rpidesigns.com/shop/item...ner-and-outer/Last edited by RPI Designs; 12-13-2019 at 11:35 AM.