Need 2 old 2.02/1.6 valves
#1
Drifting
Thread Starter
Member Since: Jul 2000
Location: Allen, TX, USA
Posts: 1,266
Likes: 0
Received 0 Likes
on
0 Posts
Need 2 old 2.02/1.6 valves
Anyone in D(FW) area have two old head valves? 2.02/1.6 sizes?
I'm trying to clean up the chambers of my heads and don't want to kill the
new valves or the seats. The 1.94/1.5 valves don't cover enough.
Or would covering the valves with duct tape be enough to protect the seats?
I'm trying to clean up the chambers of my heads and don't want to kill the
new valves or the seats. The 1.94/1.5 valves don't cover enough.
Or would covering the valves with duct tape be enough to protect the seats?
#2
Le Mans Master
I get them free from the local circle track cylinder head shop. They have 55 Gal drums full of them. You may want to get a few extra as I go through more than 2 when doing chambers.
-Mark.
-Mark.
#4
Just a little advice, if you get some old valves check them for burrs and file those off, you don't want to scrape the guides w/ some old discarded valves that were punched out w/ force (when rebuilding heads w/ fresh guides & valves)