Want to Jet-hot those headers/sidepipes? Info 4u
#1
Cruising
Thread Starter
Member Since: Dec 2005
Location: Sanford Florida
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Want to Jet-hot those headers/sidepipes? Info 4u
I recently learned of this process while trying to sell some not quite perfect hooker super comp. sidepipe headers and wanted to give others the benifit of the information I obtained. Below is a quote for the super comps which are pretty large and should be the max as for as cost to coat. I'm not advertising or recommending this product, but find it interesting, and post this for information only.
Acual email edited to remove my information.
-----------------------------------------------------------------
We really appreciate your interest in JET-HOT. This is a follow-up to
our instant response to your inquiry. This e-mail has your PRICE
ESTIMATE and some technical information you need to have.
JET-HOT is the number one supplier of ceramic coated headers in
the world. We invented this coating and have over 20 years of
experience in the science of engine exhaust technologies. We also want to let you know that we just sent you, by priority mail, information that should help you make your decision. You should have this within a few days. This packet contains several independent technical articles, a JET-HOT 20 page brochure, and a video.
Technical benefits are as follows : Looks great, reduces
under-hood temperatures by 50 degrees Fahrenheit and more, keeps pipes up to 50% cooler, Gives you 1-3% extra horsepower, extends average header life by at least 10 times, and improves safety in an accident by reducing the probability of fireballing.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~
We can coat almost anything you want including manifolds, oil pans,
springs, and a whole lot more!!!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~
The price to coat the set of headers and the pair of side pipes ,in&out
with the sterling silver finish, is $480+s&h back. If the side pipes
have mufflers/baffles, we would coat them outside only and the inlets.
Add $20 for the flat black,blue or grey finish. We'll need them here for
3-5 days plus shipping time back.If the parts are chrome or nickel
plated,add $40 to the total and 2 days for stripping.I will send you our
full information package to get you all the coating benefits in greater
detail.
Jet Hot also carries a coating called Jet Hot 2000. This coating runs up
to a temperature of 2400 degrees. The Jet Hot 2000 only comes in a flat black,blue or grey finish and has a gritty texture on the outside. The Jet Hot 2000 runs $25 more than the sterling silver finish. This coating takes 2 days longer than the sterling silver process.We suggest Jet Hot 2000 for set ups with nitro,turbos,etc.
All parts receive a 3 year unlimited guarantee that covers chipping,
peeling, cracking, discoloration, rusting. New parts also get a
lifetime rust through warranty as well.
Please ship your parts to:
Jet Hot Coatings
5602 Orchard Rd
Pascagoula MS 39581
or
1840 West Drake Dr
Tempe AZ 85283
Please note: Jet Hot 2000 is only done in the Pascagoula,MS location
Just be sure to include your name and return info so we know who they
belong to and specify the finish of your choice. As for billing, you
can either include a credit card number with the parts or you can call
one in to the phone number listed below. Please feel free to call or
email with any other questions.
Points to consider in making your decision are:
. JET-HOT has an impeccable reputation, unequaled quality and a
guarantee. A guarantee we stand behind.
. JET-HOT parent company Metallic Ceramic Coatings Inc, engineered
our coatings to the third generation which contains silver powders
allowing your components to look better, last longer, and outperform all
other coatings.
. JET-HOT uses expensive aluminum oxide to clean components. We
don't use sand like others.
. JET-HOT applies two exterior coatings and two interior coatings
and not just one layer as everyone else does.
. JET-HOT has the most brilliant appearance of any coating, not
just an ok or so-so look.
. JET-HOT will work with you to help you achieve your objectives
and will gladly provide you with technical know how at no additional
cost.
. JET-HOT has the most cost effective pricing and there are no
hidden charges.
$ SAVE 10% $
We are automobile and engine enthusiasts and want to insure your
complete satisfaction. Please review all your options. If you inform us
NOW that you intend to work with us when you are ready, we will give you a 10% discount from the quoted price. Call or email us to lock in your discount.
Our number is (800) 432-3379
YOUR FRIENDLY JET-HOT
TECHNICAL TEAM
-----Original Message-----
From: yourmail.com [mailto:yourmail.com]
Sent: Tuesday, January 03, 2006 8:34 PM
To: sales@jet-hot.com
Subject: Coating request from: customer
******Customer Information******
Customer ID:
Name: yourname
Address: your address
City: your city
State: your state
Zip: your zip
Phone: your phone
********Shipping Information******
Same as above
********Order Information******
Part to be coated
Type: sidepipe headers
Size: 1-7/8\" tube 4\" collector
Details: hooker super competition sidepipe/headers for 68-74 corvette
\Where heard about: corvette forum
Coating Requested: sterling
-------------------------------------------------------------------
I called them and asked for additional information on the process and recieved this information:
* If the metal is in good shape, don't worry about removing paint or extensive cleaning, they blast clean using aluminum oxide.
* The coating is only a few thousandths thick and will not fill any imperfections. grinding, sanding and fill welding is nessasary on pitted or scatched surfaces. Do not use brazeing as the coating will not adhere to that material.
I hope this helps anyone who is interested in this process and saves them the time I already spent in researching.
Bill
New forum member, 79 vette owner since 1988.
Acual email edited to remove my information.
-----------------------------------------------------------------
We really appreciate your interest in JET-HOT. This is a follow-up to
our instant response to your inquiry. This e-mail has your PRICE
ESTIMATE and some technical information you need to have.
JET-HOT is the number one supplier of ceramic coated headers in
the world. We invented this coating and have over 20 years of
experience in the science of engine exhaust technologies. We also want to let you know that we just sent you, by priority mail, information that should help you make your decision. You should have this within a few days. This packet contains several independent technical articles, a JET-HOT 20 page brochure, and a video.
Technical benefits are as follows : Looks great, reduces
under-hood temperatures by 50 degrees Fahrenheit and more, keeps pipes up to 50% cooler, Gives you 1-3% extra horsepower, extends average header life by at least 10 times, and improves safety in an accident by reducing the probability of fireballing.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~
We can coat almost anything you want including manifolds, oil pans,
springs, and a whole lot more!!!
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~
The price to coat the set of headers and the pair of side pipes ,in&out
with the sterling silver finish, is $480+s&h back. If the side pipes
have mufflers/baffles, we would coat them outside only and the inlets.
Add $20 for the flat black,blue or grey finish. We'll need them here for
3-5 days plus shipping time back.If the parts are chrome or nickel
plated,add $40 to the total and 2 days for stripping.I will send you our
full information package to get you all the coating benefits in greater
detail.
Jet Hot also carries a coating called Jet Hot 2000. This coating runs up
to a temperature of 2400 degrees. The Jet Hot 2000 only comes in a flat black,blue or grey finish and has a gritty texture on the outside. The Jet Hot 2000 runs $25 more than the sterling silver finish. This coating takes 2 days longer than the sterling silver process.We suggest Jet Hot 2000 for set ups with nitro,turbos,etc.
All parts receive a 3 year unlimited guarantee that covers chipping,
peeling, cracking, discoloration, rusting. New parts also get a
lifetime rust through warranty as well.
Please ship your parts to:
Jet Hot Coatings
5602 Orchard Rd
Pascagoula MS 39581
or
1840 West Drake Dr
Tempe AZ 85283
Please note: Jet Hot 2000 is only done in the Pascagoula,MS location
Just be sure to include your name and return info so we know who they
belong to and specify the finish of your choice. As for billing, you
can either include a credit card number with the parts or you can call
one in to the phone number listed below. Please feel free to call or
email with any other questions.
Points to consider in making your decision are:
. JET-HOT has an impeccable reputation, unequaled quality and a
guarantee. A guarantee we stand behind.
. JET-HOT parent company Metallic Ceramic Coatings Inc, engineered
our coatings to the third generation which contains silver powders
allowing your components to look better, last longer, and outperform all
other coatings.
. JET-HOT uses expensive aluminum oxide to clean components. We
don't use sand like others.
. JET-HOT applies two exterior coatings and two interior coatings
and not just one layer as everyone else does.
. JET-HOT has the most brilliant appearance of any coating, not
just an ok or so-so look.
. JET-HOT will work with you to help you achieve your objectives
and will gladly provide you with technical know how at no additional
cost.
. JET-HOT has the most cost effective pricing and there are no
hidden charges.
$ SAVE 10% $
We are automobile and engine enthusiasts and want to insure your
complete satisfaction. Please review all your options. If you inform us
NOW that you intend to work with us when you are ready, we will give you a 10% discount from the quoted price. Call or email us to lock in your discount.
Our number is (800) 432-3379
YOUR FRIENDLY JET-HOT
TECHNICAL TEAM
-----Original Message-----
From: yourmail.com [mailto:yourmail.com]
Sent: Tuesday, January 03, 2006 8:34 PM
To: sales@jet-hot.com
Subject: Coating request from: customer
******Customer Information******
Customer ID:
Name: yourname
Address: your address
City: your city
State: your state
Zip: your zip
Phone: your phone
********Shipping Information******
Same as above
********Order Information******
Part to be coated
Type: sidepipe headers
Size: 1-7/8\" tube 4\" collector
Details: hooker super competition sidepipe/headers for 68-74 corvette
\Where heard about: corvette forum
Coating Requested: sterling
-------------------------------------------------------------------
I called them and asked for additional information on the process and recieved this information:
* If the metal is in good shape, don't worry about removing paint or extensive cleaning, they blast clean using aluminum oxide.
* The coating is only a few thousandths thick and will not fill any imperfections. grinding, sanding and fill welding is nessasary on pitted or scatched surfaces. Do not use brazeing as the coating will not adhere to that material.
I hope this helps anyone who is interested in this process and saves them the time I already spent in researching.
Bill
New forum member, 79 vette owner since 1988.
#2
Le Mans Master
I bought my Hooker's direct from Jet Hot. Very happy with the coating.
#5
Cruising
Thread Starter
Member Since: Dec 2005
Location: Sanford Florida
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Wow! I like having Choices
I visited the airborn site and was pleased to see choices are available. I also noticed they were cheaper. I think the prep and surface requirements still apply. Anyone know of other alternatives? Good to be able to shop around.
Thanks
Bill
Thanks
Bill
#6
Hey! So they actually CAN reply to an e-mail
Too bad for them, bought a set of ceramics off a forum member now (thnx John!)
Too bad for them, bought a set of ceramics off a forum member now (thnx John!)