Pics of my 1969 Stingray
08-02-2013, 10:51 AM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
Seat track bolts in flat black
08-02-2013, 10:52 AM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
I like cast grey, so that is what I did on these, though should be black I am guessing
08-02-2013, 10:58 AM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
08-05-2013, 02:45 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
Before and after..
08-05-2013, 02:55 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
08-06-2013, 09:00 AM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
08-30-2013, 01:05 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
08-30-2013, 01:06 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
belt all bolted in, I wrapped and paper towel and taped it up as don't want them to get damaged as I will be in the car installing console, seats etc
08-30-2013, 01:06 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
did a cross word in between installing belts..haha, actually wrapped the belt buckles in this, after wrapped in the paper towels
08-30-2013, 01:07 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
08-30-2013, 01:16 PM
Pro
Member Since: Apr 2012
Location: USA
Posts: 690
wow
Quote:
Originally Posted by
BOSTONCAMARO
Before and after..
How did you do this?
08-30-2013, 01:21 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
I had to break them apart to get the pin out, to get the belt out, then re welded them, smoothed them out, sent out to be chromed. They took awhile to get back but worth the wait, they are pretty much flawless especially considering how messed up they were, heavy pitting etc, I rewelded the ends that hold the pins and welded up pits, smoothed them out, but the chromers finished them off very nicely
Custom Metal Finishing IN
1-866-489-4089
Call or Email for spot-on bumper quotes!
ChromePlater1@Yahoo.com
www.ChromePlatingIN.com
08-30-2013, 01:26 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
What look like marks are just smudges from fingers
09-12-2013, 04:04 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
Passenger side interior panel in place, again the light and camera making it look WAY shinier than it is, it really looks correct. Once car is outside will take some good pics.
Not bad for a bunch of used crap.
10-08-2013, 10:09 AM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
10-08-2013, 04:55 PM
Le Mans Master
Member Since: Oct 2006
Location: Palmdale CA
Posts: 6,842
Great photos! I finally figured out, how the pop out rear window works, thanks to your pics!
10-08-2013, 08:34 PM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
Haha cheap camera on crappy phone
10-08-2013, 10:16 PM
Le Mans Master
Member Since: Oct 2006
Location: Palmdale CA
Posts: 6,842
Quote:
Originally Posted by
BOSTONCAMARO
Haha cheap camera on crappy phone
Choices! Good Camera or Corvette Parts... Hmm...
10-16-2013, 09:42 AM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
Not NCRS, but not bad, fingerprints and a couple light scratches that I later touched up.....
It is all done, all installed!
10-16-2013, 09:43 AM
Melting Slicks
Thread Starter
Member Since: May 2006
Location: Lynn MA
Posts: 3,292
Likes: 0
08-30-2013, 01:06 PM
