Pics of my 1969 Stingray
#110
Melting Slicks
Thread Starter
Good used bracket and rubber bushing fabbed up for my from Bill Tucker..who I also bought the bracket from, thanks! Radiator is from Restmod69...and I forget who I bought the shroud from
#116
Melting Slicks
Thread Starter
I call this the Bill Tucker Special, I changed to a 90 degree fitting on the intake for the heater core hose after seeing Bill Tucker's engine
My Camaro has all AN stuff and want this to be a simpler, old school type look and with the gold zinc plating on the alternator fan etc, this looks good.
My Camaro has all AN stuff and want this to be a simpler, old school type look and with the gold zinc plating on the alternator fan etc, this looks good.
#117
Drifting
Member Since: Jul 2004
Location: Kissimmee fl
Posts: 1,650
Received 51 Likes
on
31 Posts
Finalist 2021 C3 of the Year - Modified
2017 C3 of Year Finalist
Cruise-In VIII Veteran
St. Jude Donor '07
[QUOTE=BOSTONCAMARO;1579437790]I call this the Bill Tucker Special, I changed to a 90 degree fitting on the intake for the heater core hose after seeing Bill Tucker's engine
My Camaro has all AN stuff and want this to be a simpler, old school type look and with the gold zinc plating on the alternator fan etc, this looks good.
Thanks for the plug. Looking good. Did you come up with something for your carb. gas line?
My Camaro has all AN stuff and want this to be a simpler, old school type look and with the gold zinc plating on the alternator fan etc, this looks good.
Thanks for the plug. Looking good. Did you come up with something for your carb. gas line?
#118
Safety Car
Where do you get a 90 degree plug for the heater hose?
Nice pics, helps out a lot of people to see where stuff goes or gives ideas on how to do stuff. A+
Nice pics, helps out a lot of people to see where stuff goes or gives ideas on how to do stuff. A+
#119
Melting Slicks
Thread Starter
I bought it on ebay as I could not find one locally at any parts stores or Homie D's or Lowes
It was 8 bucks! you need 1/2 pipe thread to 5/8 barb
Did not do fuel line yet, just had the pleasure of doing all new front suspension in my FJ Cruiser
You can see pics of that fiasco here:
http://www.facebook.com/media/set/?s...1&l=c79428c097
It was 8 bucks! you need 1/2 pipe thread to 5/8 barb
Did not do fuel line yet, just had the pleasure of doing all new front suspension in my FJ Cruiser
You can see pics of that fiasco here:
http://www.facebook.com/media/set/?s...1&l=c79428c097