Help with 4-speed trans bracket
Thread Starter
Pro
Joined: Sep 2007
Posts: 735
Likes: 1
From: Harleysville PA
Help with 4-speed trans bracket
i just noticed that the bracket on drivers side that the trans support bolts to is broken. this is the bracket that is welded to the underside of the frame. i do not see this part listed in any of the bigger vendor catalogues
anyone have one or know where to get it?
anyone have one or know where to get it?
Safety Car
Joined: Oct 2000
Posts: 4,282
Likes: 172
From: Lake Wylie, South Carolina
Are you talking about the brackets that are welded onto the cross member and kinda shaped like an "L"? If so I am not sure this info will help but I will throw it out there. I did an auto to manual conversion and my X member did not have these. I am taking a couple of peices of 1\4" steel and cutting them to fit then weld them to the cross member where a true manual car would have them. looked for these in the vendor catalogs already pre formed but was never able to find them. If these are the ones you are talking about you may have to go the same route and fab some up.
Hope this helped.
Hope this helped.
