C3 General General C3 Corvette Discussion not covered in Tech
Sponsored by:
Sponsored by:

68 seat questions

Old 04-29-2012, 06:14 AM
  #1  
JaredLINY
3rd Gear
Thread Starter
 
JaredLINY's Avatar
 
Member Since: Apr 2012
Location: Middle Island New York
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default 68 seat questions

I've recently gotten my self in to a 68 vert. I like all the little idiosyncrasies of the 68 but sometimes the differences can be challenging to navigate. I've been looking for some seat replacements because one of the previous owners had changed the seats to what looks like seats out of a 70-76. beeing that i haven't seen 68 seats in person because I'm the only person i know with a 68. i was wondering about a few things.

1 I keep seeing the lower latch style is there Two styles of latches for the 68 seats. does the lower latch just refer to a latch not on the middle top of the seat. Or is there a upper and lower position for the release latch on the side of the seat. and how does all this pertain to early vs late style etc. the more info the better. pictures help.

2 I have seen this chrome device on the front of some of the 68 seats in pictures what is this. http://i1161.photobucket.com/albums/...etteseats1.jpg

3 where is and what type of latch does the 69 seats have because i might source a set of them if i cant find a set of 68's(not a likely choice thought)

thanks guys, and I'm counting on my Fellow 68 guys and gals out there to help me out.
Old 04-29-2012, 07:02 AM
  #2  
bkvette3
Safety Car
 
bkvette3's Avatar
 
Member Since: Jul 2009
Location: Saskatchewan, Canada
Posts: 3,710
Received 93 Likes on 82 Posts

Default

Hello - Welcome to the Forum and the '68 club. Check out the C3 parts for sale/wanted section. There is an early '68 seat (lower latch) for sale with pictures. Is your '68 an early or late model??? BK3

Last edited by bkvette3; 04-29-2012 at 07:14 AM.
Old 04-29-2012, 08:55 AM
  #3  
dbeall1968
Melting Slicks
 
dbeall1968's Avatar
 
Member Since: Jul 2007
Location: Westminster Maryland
Posts: 3,352
Likes: 0
Received 1 Like on 1 Post
Default

Here are mine after I restored them- low latch style on a June 68 car
Old 04-29-2012, 09:26 AM
  #4  
capevettes
Race Director
Support Corvetteforum!
 
capevettes's Avatar
 
Member Since: Oct 2004
Location: Cape Cod, Mass.
Posts: 18,760
Received 4,543 Likes on 2,159 Posts
2023 C3 of the Year Finalist - Unmodified
2021 C8 of the Year Finalist Unmodified
2020 Corvette of the Year Finalist (performance mods)
2019 C1 of Year Winner (performance mods)
2017 Corvette of the Year Finalist
2016 C2 of Year
2015 C3 of Year Finalist

Default

Early 68, up to about serial number 25,200, had the lower latches. They were moved higher for easier accessibility after that. (Mine are early and tough to get at).

The seats pictured look like they may be 69's with the stainless on the front. I believe it's for the seat belts after serial # 9745 in 69 but someone with a 69 can chime in on that. 69's would have the higher latch.
Headrests were optional in 68 and standard on 69.

Last edited by capevettes; 04-29-2012 at 09:28 AM.
Old 04-29-2012, 09:27 AM
  #5  
Clams Canino
Melting Slicks
 
Clams Canino's Avatar
 
Member Since: Jun 2009
Location: Anderson SC
Posts: 2,343
Received 4 Likes on 4 Posts
Default

Originally Posted by JaredLINY
Or is there a upper and lower position for the release latch on the side of the seat.

This.

Also....

The chrome device is the newer place to hang the seat belt buckle. As opposed to a cup in the e-brake cover.
As far as I know, they didn't appear until 1969.

-W

Last edited by Clams Canino; 04-29-2012 at 09:30 AM.
Old 04-29-2012, 06:05 PM
  #6  
JaredLINY
3rd Gear
Thread Starter
 
JaredLINY's Avatar
 
Member Since: Apr 2012
Location: Middle Island New York
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey guys thanks for the words of wisdom. I think I was just thinking about it to hard. Got it all figured out now. Here are some picks for anyone who stumbles across this tread wondering the same thing. (that being if anyone could possibly be a dumb as I with this.)

Upper

Lower
Old 04-30-2012, 10:01 AM
  #7  
Easy Mike
Team Owner
Support Corvetteforum!
 
Easy Mike's Avatar
 
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes on 1,247 Posts
Cruise-In II Veteran

Default

Originally Posted by JaredLINY
...does the lower latch just refer to a latch not on the middle top of the seat...
Early and late seat backs refers to the position of the seat back release latch. It's down on the bottom of the seat back on early cars and higher up on the seast back for later cars. 68 and 69 seats do not have release buttons on the top middle of the seat backs. Those came later.

...I have seen this chrome device on the front of some of the 68 seats in pictures what is this. http://i1161.photobucket.com/albums/...etteseats1.jpg\
68s did not use the seat belt clips.

These are 68:


Good reading here. Worth the price of a copy.


Old 04-30-2012, 10:26 AM
  #8  
Clams Canino
Melting Slicks
 
Clams Canino's Avatar
 
Member Since: Jun 2009
Location: Anderson SC
Posts: 2,343
Received 4 Likes on 4 Posts
Default

I put a set of black leather '82 seats in my '68 and was done with it.
My '68 seat frames were SO bad that I couldn't give them away here....
I like the later seats much better anyway....

-W
Old 04-30-2012, 02:11 PM
  #9  
WESCH
Melting Slicks
 
WESCH's Avatar
 
Member Since: Feb 2001
Location: Europe , Luxembourg
Posts: 3,304
Likes: 0
Received 3 Likes on 3 Posts

Default

Hi

Here are mine after I restored them- low latch style on a June 68 car

Is a June car a early 68 ?

I had a April car and it had the high latches.

Rgds. Günther
Old 04-30-2012, 02:24 PM
  #10  
Easy Mike
Team Owner
Support Corvetteforum!
 
Easy Mike's Avatar
 
Member Since: Jun 2000
Location: Southbound
Posts: 38,928
Likes: 0
Received 1,468 Likes on 1,247 Posts
Cruise-In II Veteran

Default

Originally Posted by WESCH
...Is a June car a early 68?...
Not really since production continued through mid-August 68, BUT earlier than July and August cars.

Old 04-30-2012, 11:20 PM
  #11  
thatcorvetteguy
Burning Brakes
 
thatcorvetteguy's Avatar
 
Member Since: Jan 2010
Location: Rexburg Idaho
Posts: 958
Likes: 0
Received 85 Likes on 70 Posts

Default

Originally Posted by capevettes
Early 68, up to about serial number 25,200, had the lower latches. They were moved higher for easier accessibility after that. (Mine are early and tough to get at).

The seats pictured look like they may be 69's with the stainless on the front. I believe it's for the seat belts after serial # 9745 in 69 but someone with a 69 can chime in on that. 69's would have the higher latch.
Headrests were optional in 68 and standard on 69.
25,200 was around middle of June.

Get notified of new replies

To 68 seat questions



Thread Tools
Search this Thread
Quick Reply: 68 seat questions



All times are GMT -4. The time now is 09:07 PM.