Radiator Test...
Thread Starter
Melting Slicks
Joined: Feb 1999
Posts: 2,473
Likes: 10
From: New Paltz, New York USA
Radiator Test...
Is there a way for me to do a pressure test on my own radiator. I think I have a small hole in my new radiator, but I do not trust any of our local radiator shops to test it for me.
Maybe some kind of radiator cap that will allow me to use air pressure from my compressor? TIA.
Maybe some kind of radiator cap that will allow me to use air pressure from my compressor? TIA.
Le Mans Master
Joined: Aug 2006
Posts: 7,427
Likes: 1,560
From: mount holly NC
2025 c3 ('74-'82) of the Year Finalist - Unmodified
2019 C3 of Year Finalist (appearance mods)
Team Owner
Joined: Dec 2003
Posts: 21,848
Likes: 140
From: When all is said and done... there is a hell of a lot more said than done. Riverside,Texas
St. Jude Donor '05 thru '26
Probably build one pretty cheap with old radiator cap,solder, and a $10 pressure guage. Just don't pressure it over 18 to 20 psia.
Thread Starter
Melting Slicks
Joined: Feb 1999
Posts: 2,473
Likes: 10
From: New Paltz, New York USA
Thank you very much.
Le Mans Master
Joined: Jan 2001
Posts: 6,744
Likes: 1,385
just get a bicycle tire tube....
and cut it, clamp the ends onto the 2 big pipes on the radiator. Block off all of other ports. Put the radiator in a big container filled with water. Pressurize your bicycle tube and check for bubbles.
Is there a way for me to do a pressure test on my own radiator. I think I have a small hole in my new radiator, but I do not trust any of our local radiator shops to test it for me.
Maybe some kind of radiator cap that will allow me to use air pressure from my compressor? TIA.
Maybe some kind of radiator cap that will allow me to use air pressure from my compressor? TIA.
