Learned Something Today
#1
Pro
Thread Starter
Learned Something Today
I have used Evaporust for years for neutralizing rusty areas on car parts and other things. I am in the process of cleaning and preparing my power window regulators and components for a refurb and installation. Those parts are mostly galvanized steel and mine had some areas of oxide corrosion including rust on the carbon steel under the galvanize. I submerged these parts in Evaporust to treat the rust which it did quite well. However, I noticed that it also really cleaned the crusty, sticky, whitish oxide off the otherwise good galvanize leaving it slick and almost polished in appearance. This has to help these parts work a little smoother. Don't mean this to sound like a commercial as I have no connection with the company but thought I would pass that along as a tip.
Last edited by 68/BB; 08-18-2014 at 01:37 PM.
#4
Nam Labrat
Member Since: Sep 2013
Location: New Orleans Loo-z-anna
Posts: 33,893
Received 4,173 Likes
on
2,735 Posts
Yes.....I wouldn't mind the change of watching something ELSE do the work.......LOL!
#5
Team Owner
With the galvanized finish removed, you will have to find another way to prevent rust on those mild-steel parts. You can't really paint any areas which have sliding movement present. Those will have to be plated with something and a galvanized finish is the least expensive.
#6
Pro
Thread Starter
With the galvanized finish removed, you will have to find another way to prevent rust on those mild-steel parts. You can't really paint any areas which have sliding movement present. Those will have to be plated with something and a galvanized finish is the least expensive.
Last edited by 68/BB; 08-19-2014 at 08:28 AM.
#7
Team Owner
Using a clear coat is no problem on surfaces that do not have 'sliding' contact between parts. Where there is "work" being done, paint is not a good choice.