72 Road Race Replica Ideas Sought
#341
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I took the car down to Seven Wraps today and it has been photographed and measured, now graphics development begins. I'll move car out of trailer, shoot some additional pictures this weekend and get busy putting it together. More soon.
David
David
#344
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
It is actually three pieces. Grilles themselves are from a 1965 Corvette, modified and cut in half with center section removed to allow a steeper angle that this nose required. Center section is a custom piece of fiberglass made to fill the gap and give it the finished look. Grilles are powder coated matte black, center section is matte black rattle can paint at this time. Final color selections being discussed now but the fit and look came out good in my estimation. I'll get more pictures taken and posted soon.
Thanks for looking.
David Howard
AllC34Me
Thanks for looking.
David Howard
AllC34Me
#345
Melting Slicks
#347
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
#348
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Delay in progress due to Mother-In-Law heart attack. She's stable and improving so I'm coming back home Thursday; wife staying with her mother.
Parts ordered late last week so I can finish the T-Tops, headlights, hood support and hood release/latches. I'll do that work while I am a bachelor at home this weekend and I can turn the garage A/C on. Visitors welcome.
More soon.
David
Parts ordered late last week so I can finish the T-Tops, headlights, hood support and hood release/latches. I'll do that work while I am a bachelor at home this weekend and I can turn the garage A/C on. Visitors welcome.
More soon.
David
#350
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
#351
Burning Brakes
#353
Burning Brakes
I sure know the feeling, I'm headed to Washington state tomorrow for a few days.. It will be cool in that area.... Hope to be back early in the week....
Tim
Tim
The following users liked this post:
AllC34Me (07-30-2016)
#355
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I ordered and received a GM Performance Serpentine Kit for my 496 Big Block and laid out the pieces for this picture.
I liked it because it had these great heavy duty brackets included that will help organize the front of the engine and the components including the water pump, a/c compressor, alternator, and power steering pump.
And this is what it is supposed to look like when it installed.
I won't be installing it until the car comes back from the race wrap. The car leaves for that activity on Monday next so it won't be too long before I have the final graphics selected, printed, and installed.
First step will be to wrap the entire car in white, front to back, top to bottom; then we will measure up the car, mark up the grids, and begin laying out the color portion of the graphics. We will be considering Red, Black, Gray, Blue, and Green and will select from the images on the computer.
Anyway, the process of wrapping begins Monday the 8th, will take just over a week to complete.
I will keep you informed all along the way.
Best regards,
David Howard
AllC34Me
I liked it because it had these great heavy duty brackets included that will help organize the front of the engine and the components including the water pump, a/c compressor, alternator, and power steering pump.
And this is what it is supposed to look like when it installed.
I won't be installing it until the car comes back from the race wrap. The car leaves for that activity on Monday next so it won't be too long before I have the final graphics selected, printed, and installed.
First step will be to wrap the entire car in white, front to back, top to bottom; then we will measure up the car, mark up the grids, and begin laying out the color portion of the graphics. We will be considering Red, Black, Gray, Blue, and Green and will select from the images on the computer.
Anyway, the process of wrapping begins Monday the 8th, will take just over a week to complete.
I will keep you informed all along the way.
Best regards,
David Howard
AllC34Me
#356
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I have also spoken to Vintage Air about the engine bay side of their new A/C setup and we will be using their components in combination with the GM Performance system. I will be running the Dewitt's High Volume aluminum radiator with Dual SPAL fans and controllers.
I have the interior pieces to the A/C, and now the engine bay portion has been ordered.
So the big ticket items have been ordered and the "build" will begin soon.
Anybody out there want to help me install the pedal assembly?
Thanks for looking.
David Howard
AllC34Me
I have the interior pieces to the A/C, and now the engine bay portion has been ordered.
So the big ticket items have been ordered and the "build" will begin soon.
Anybody out there want to help me install the pedal assembly?
Thanks for looking.
David Howard
AllC34Me
#357
Le Mans Master
Member Since: May 2003
Location: Fernandina Beach FL
Posts: 8,481
Received 3,220 Likes
on
1,732 Posts
2023 Restomod of the Year finalist
2020 C3 of the Year Winner - Modified
Hey David-
Really coming together nice!!!
Pedal assembly? That's not tough at all compared to what you have done !!!
John keeps threatening to come down here w/ you...Doesn't he still have an ankle bracelet?
Really coming together nice!!!
Pedal assembly? That's not tough at all compared to what you have done !!!
John keeps threatening to come down here w/ you...Doesn't he still have an ankle bracelet?
#359
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
John would love to come to Atlanta, so would I, and have tried a couple of times to pull off arranging it without much luck. Will continue to try.
David
#360
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Have a great weekend.
David