Parts Shopping at Carlisle
#1
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Parts Shopping at Carlisle
I have found myself in an interesting position this year heading to Carlisle with only one item on my pick up list, three items on my drop off list, and three forum members I am doing some searching for this year.
I will be at Carlisle all day Friday, half a day on Saturday, maybe all day if weather stays as nice as they say it will be.
I live two hours from Carlisle, fyi.
I am looking for Priya, Beau, and Dennis to locate some parts they need. It is not a tough task to look, located, and text them a picture of what I have found. If they want to negotiate a price with the seller, fine by me. If they want me to buy it and reimburse me, fine by me. My point is within reason if you cannot make Carlisle this year and you really need something you can ask me to look for it and if I think I can I will agree to do it and set up arrangements with you directly.
In the case of some members if I located what they want and buy it I will bring it home and pack it up and ship it to them.
So if this is something I can do to help you out with a specific part or parts let me know, be glad to try and help you as much as possible.
I have a Chevy Silverado 2500 and my Sparty trailer in tow this year, so I will have some room.
Let me know if I can help and best regards,
David Howard
AllC34Me
I will be at Carlisle all day Friday, half a day on Saturday, maybe all day if weather stays as nice as they say it will be.
I live two hours from Carlisle, fyi.
I am looking for Priya, Beau, and Dennis to locate some parts they need. It is not a tough task to look, located, and text them a picture of what I have found. If they want to negotiate a price with the seller, fine by me. If they want me to buy it and reimburse me, fine by me. My point is within reason if you cannot make Carlisle this year and you really need something you can ask me to look for it and if I think I can I will agree to do it and set up arrangements with you directly.
In the case of some members if I located what they want and buy it I will bring it home and pack it up and ship it to them.
So if this is something I can do to help you out with a specific part or parts let me know, be glad to try and help you as much as possible.
I have a Chevy Silverado 2500 and my Sparty trailer in tow this year, so I will have some room.
Let me know if I can help and best regards,
David Howard
AllC34Me
The following 2 users liked this post by AllC34Me:
bmans vette (08-29-2016),
The13Bats (08-23-2016)
#2
Racer
You are truly a 1st class person Phil
#3
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Just trying to help my fellow Vette Nuts. LOL.
The following 4 users liked this post by AllC34Me:
#4
Drifting
David....I'm needing a stereo convector/amp for my '72....(the one with 2 DS-501 resistors) There are a few on ebay with prices including shipping from as cheap as $35 up to about $75. The problem is not knowing if they work or not....The cheaper ones are also the rougher looking ones. I also need the harness that connects the radio to the convector, the one on my radio was cut off.
Only other items I need are driver quality black rear compartment doors....Jack and battery compartment. The overall frame and center door are in pretty good shape.
I'd go.....
$25 for the convector
$15 each for decent doors
Thank You
Brian
Cell# 770-653-9019
PS.....If you are ever on the Interstate 75 corridor 50 or so miles north of Atlanta....Lunch is on me.
Only other items I need are driver quality black rear compartment doors....Jack and battery compartment. The overall frame and center door are in pretty good shape.
I'd go.....
$25 for the convector
$15 each for decent doors
Thank You
Brian
Cell# 770-653-9019
PS.....If you are ever on the Interstate 75 corridor 50 or so miles north of Atlanta....Lunch is on me.
Last edited by Wee; 08-22-2016 at 12:20 PM.
#5
Le Mans Master
Member Since: Oct 2007
Location: Akron Ohio
Posts: 8,859
Received 1,725 Likes
on
932 Posts
2023 C5 of the Year Finalist - Modified
2022 C5 of the Year Finalist - Modified
St. Jude Donor '09-'10-'11
Wow David! This is very nice of you!
If you happen to see a killer deal on a '73-'76 stock hood (like around $100 or less) send me a picture. We can meet up somewhere in between Easton and Akron sometime (soon hopefully). As long as the bolt holes and frame are in good shape I don't care much about the appearance. I'll be using it to put a scoop on and cover my wiper area so it will get painted. Don't go out of your way looking for one though, just if you happen to see something, OR if that is too big to cart around don't worry about it.
Mike Kubiak
(216) 956-0169
If you happen to see a killer deal on a '73-'76 stock hood (like around $100 or less) send me a picture. We can meet up somewhere in between Easton and Akron sometime (soon hopefully). As long as the bolt holes and frame are in good shape I don't care much about the appearance. I'll be using it to put a scoop on and cover my wiper area so it will get painted. Don't go out of your way looking for one though, just if you happen to see something, OR if that is too big to cart around don't worry about it.
Mike Kubiak
(216) 956-0169
Last edited by Kubs; 08-22-2016 at 02:57 PM.
#6
Team Owner
I used to camp out at Carlisle, actually my Sis' place in Shippensburg, one town down I81 from there it was about 2 hours from North of DC in Faryland......went to the 3 shows for many a year, weather depending, and went to the Vette shows when getting my '87 in '92 but moved to Florida in '97, the car shows there are one of the major things I miss about the region.....
have fun guys, 5000000000 acres of nothing but car parts.....gotta get lucky somehow......
have fun guys, 5000000000 acres of nothing but car parts.....gotta get lucky somehow......
#7
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
David....I'm needing a stereo convector/amp for my '72....(the one with 2 DS-501 resistors) There are a few on ebay with prices including shipping from as cheap as $35 up to about $75. The problem is not knowing if they work or not....The cheaper ones are also the rougher looking ones. I also need the harness that connects the radio to the convector, the one on my radio was cut off.
Only other items I need are driver quality black rear compartment doors....Jack and battery compartment. The overall frame and center door are in pretty good shape.
I'd go.....
$25 for the convector
$15 each for decent doors
Thank You
Brian
Cell# 770-653-9019
PS.....If you are ever on the Interstate 75 corridor 50 or so miles north of Atlanta....Lunch is on me.
Only other items I need are driver quality black rear compartment doors....Jack and battery compartment. The overall frame and center door are in pretty good shape.
I'd go.....
$25 for the convector
$15 each for decent doors
Thank You
Brian
Cell# 770-653-9019
PS.....If you are ever on the Interstate 75 corridor 50 or so miles north of Atlanta....Lunch is on me.
If you get a text from 610-217-7158 that is me trying to reach you with pictures and prices.
Wish me luck.
David
The following users liked this post:
Wee (08-22-2016)
#8
it came equipped with the AM/FM/ CB radio and he's been working on getting that system all up and functional..NCRS.
Anyhow he's seeking the power antenna specific to that year and system.
every corvette vendor has pwr antennas of one sort or another that work EXCEPT they are NON-CB units.He has all the other components, wiring, splitter relat etc..but needs the specic CB antenna..
He finally found out what the oem part # is..:He sent me this yesterday..His name is TOM JACKSON.. and I think he's going to Carlisle.
After a bit of research, I was able to locate the part number and a pix of the CB version of the power antenna,] PN# 5044887. It does have a "load coil" on the top of the antenna, its a small gray barrel.Unless you are looking for it, its hard to tell the difference between the two antennas!
SO if you happen to run across one let me know..Tom posts here occasionally.. and I have is email and cell phone#..Have fun at Carlisle..Wish I could be there..
I don't do texting by my wife does..503-654-9313.. just caption it 'corvette antenna'.Thanks muchJim
Last edited by jim in oregon; 08-22-2016 at 05:47 PM.
#10
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Sorry, I am not sure. I traded mine in to Bair's.
#11
Racer
#12
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Wow David! This is very nice of you!
If you happen to see a killer deal on a '73-'76 stock hood (like around $100 or less) send me a picture. We can meet up somewhere in between Easton and Akron sometime (soon hopefully). As long as the bolt holes and frame are in good shape I don't care much about the appearance. I'll be using it to put a scoop on and cover my wiper area so it will get painted. Don't go out of your way looking for one though, just if you happen to see something, OR if that is too big to cart around don't worry about it.
Mike Kubiak
(216) 956-0169
If you happen to see a killer deal on a '73-'76 stock hood (like around $100 or less) send me a picture. We can meet up somewhere in between Easton and Akron sometime (soon hopefully). As long as the bolt holes and frame are in good shape I don't care much about the appearance. I'll be using it to put a scoop on and cover my wiper area so it will get painted. Don't go out of your way looking for one though, just if you happen to see something, OR if that is too big to cart around don't worry about it.
Mike Kubiak
(216) 956-0169
Will let you know.
David
The following users liked this post:
Kubs (08-24-2016)
#13
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I used to camp out at Carlisle, actually my Sis' place in Shippensburg, one town down I81 from there it was about 2 hours from North of DC in Faryland......went to the 3 shows for many a year, weather depending, and went to the Vette shows when getting my '87 in '92 but moved to Florida in '97, the car shows there are one of the major things I miss about the region.....
have fun guys, 5000000000 acres of nothing but car parts.....gotta get lucky somehow......
have fun guys, 5000000000 acres of nothing but car parts.....gotta get lucky somehow......
Have a good weekend.
David Howard
AllC34Me
#14
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Today is Tuesday and we have today and tomorrow to wrap up this posting. I have printed out the requests thus far and I am have my search list growing for my visit.
I will accept requests until about 8:00 pm on Wednesday, then I will have to shut it down and move forward with my plans, I leave Thursday morning early for the show.
Let me know if I can help.
Best regards,
David Howard
AllC34Me
I will accept requests until about 8:00 pm on Wednesday, then I will have to shut it down and move forward with my plans, I leave Thursday morning early for the show.
Let me know if I can help.
Best regards,
David Howard
AllC34Me
#15
Melting Slicks
David,
Hi Again. I am still looking for original windshields dated mid 68 thru any 72 date. No need to ship etc. If you locate anyone with with LOF windshields please just call me and/or have them call me.
Thanks as always,
Joe
216-374-6243
Hi Again. I am still looking for original windshields dated mid 68 thru any 72 date. No need to ship etc. If you locate anyone with with LOF windshields please just call me and/or have them call me.
Thanks as always,
Joe
216-374-6243
#16
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Good morning. It is 07:00 am on Thursday morning and I am loaded for Carlisle and ready to head on down the road, shortly. I have all the requests printed out, also made an itemized list of parts requested, and will begin my search today when I arrive at the fairgrounds.
I do have a front sway bar assembly, four wheel dollies, a snubber bracket, two drive shafts, and two rear grille assemblies I have to deliver and those are all loaded. I am picking up a front air dam for my 72 racer and a 75 body for the 75 restoration project during this visit.
List in hand, money in pockets, motivation in head, camera ready to go, should be a good show.
Thanks to all for the lists, I will do my best to help you in your searches.
Best regards,
David Howard
AllC34Me
I do have a front sway bar assembly, four wheel dollies, a snubber bracket, two drive shafts, and two rear grille assemblies I have to deliver and those are all loaded. I am picking up a front air dam for my 72 racer and a 75 body for the 75 restoration project during this visit.
List in hand, money in pockets, motivation in head, camera ready to go, should be a good show.
Thanks to all for the lists, I will do my best to help you in your searches.
Best regards,
David Howard
AllC34Me
#17
Melting Slicks
Dave - it's very nice of you to help everyone out. I'll be up tomorrow and just wanted to drop you a line to say how nice it is of you to help people out.
If anyone in my area needs anything small, let me know and I'll check - (not much room in the C3's for anything big - as we all know)
If anyone in my area needs anything small, let me know and I'll check - (not much room in the C3's for anything big - as we all know)
#18
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Dave - it's very nice of you to help everyone out. I'll be up tomorrow and just wanted to drop you a line to say how nice it is of you to help people out.
If anyone in my area needs anything small, let me know and I'll check - (not much room in the C3's for anything big - as we all know)
If anyone in my area needs anything small, let me know and I'll check - (not much room in the C3's for anything big - as we all know)
#19
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Quick observation from today's shopping. Lots and lots of people are selling C-2 and early C-3 parts this year. Very few 79-82 sellers, lots of 68-73 parts. Mixed bag 74-78. Mostly mechanical stuff, very little interior stuff.
I'll give it another run tomorrow.
David
I'll give it another run tomorrow.
David
Last edited by AllC34Me; 08-25-2016 at 05:43 PM.
#20
Melting Slicks
hi ALLC34ME, did you happen to hit the car sales section? was wondering how prices were and what was there. im looking for a 69 thru 72 4 speed in really nice shape. prefer a BB. coupe or vert. THANKS., oh, i will be there tomorrow
Last edited by nutsy; 08-25-2016 at 06:37 PM.