Pics of a cutted 69 Wiper Door Actuator
#1
Burning Brakes
Thread Starter
Pics of a cutted 69 Wiper Door Actuator
Hello Together,
didn't find a thread with pics like these, so I open this tread
Maybe someone find them helpfull
didn't find a thread with pics like these, so I open this tread
Maybe someone find them helpfull
The following 4 users liked this post by Roma:
#3
Team Owner
Member Since: Sep 2006
Location: Westminster Maryland
Posts: 30,173
Likes: 0
Received 2,878 Likes
on
2,515 Posts
Hi Roma,
Thanks!
Interesting photos!!
It illustrates why cycling the actuators without removing the hoses on the actuator's pipes can damage the seal!
Regards,
Alan
Thanks!
Interesting photos!!
It illustrates why cycling the actuators without removing the hoses on the actuator's pipes can damage the seal!
Regards,
Alan
Last edited by Alan 71; 12-02-2016 at 03:33 PM.
#4
Melting Slicks
I repaired one on my 68 coupe years ago, by using a razor saw to cut the can off, make a seal out of diaphragm rubber and then gently soldered the can back on. A new GM replacement was around $100.00, thirty-five years ago! The seal eventually wore out.
The original seal rolled over in one spot. Lou.
The original seal rolled over in one spot. Lou.