1972 speedo cable routing.
#1
Race Director
Thread Starter
1972 speedo cable routing.
I converted my 72 from auto to 4 speed. And can't figure out which firewall hole the cable goes thru. I found this picture (from 69 but should be the same.) while searching and they used #4. I checked and I don't have that hole drilled on the firewall. The hole is in the insulation but is not thru the firewall. Now I can drill a hole or I can run it thru the hole for the auto, if it is different. Which hole would the auto use?
The following users liked this post:
MISTERZ06 (05-22-2017)