Won't be using Eastwood epoxy anymore.
#1
Race Director
Thread Starter
Won't be using Eastwood epoxy anymore.
Painted the underside of my hood with eastwood epoxy. I usually use SPI but thought I would give eastwood a look. Well sprayed it yesterday and almost 24 hours later it still is tacky. Left it in the sun another 2 hours and still tacky. Well I started to peel it off with the razor method.
I just love jobs that should take 1 day and turns into 2 or 3 day jobs.
I won't be able to paint this again until later and put the hood on Friday.
And yes it was mixed as per instructions and used as per instruction and it wasn't sitting on my shelf for a year.
I just love jobs that should take 1 day and turns into 2 or 3 day jobs.
I won't be able to paint this again until later and put the hood on Friday.
And yes it was mixed as per instructions and used as per instruction and it wasn't sitting on my shelf for a year.
#2
Racer
Member Since: Mar 2014
Location: Easton Massachusetts
Posts: 295
Likes: 0
Received 18 Likes
on
16 Posts
I believe the store brand paints such as Eastwood and Summit pretty much come from the same place. I have used the Summit brand paints and primers and have had good results with them. Maybe you just got a bad batch.
#3
Race Director
Thread Starter
#4
Melting Slicks
Member Since: Dec 2016
Location: Central Bucks County, Pennsylvania
Posts: 3,181
Received 182 Likes
on
133 Posts
I boycott EW for other reasons.
#6
Race Director
Thread Starter