'81 LS swap, Exhaust Options?
#1
'81 LS swap, Exhaust Options?
Soooo... I'm going from "gungho for sidepipes" to "**** I just want stainless exhaust"...
Doing an LS swap in my '81 and I'm scouring the internet for stainless exhaust options and coming up short. Anyone got any links?
Doing an LS swap in my '81 and I'm scouring the internet for stainless exhaust options and coming up short. Anyone got any links?
The following users liked this post:
KIKIRIKI (09-30-2017)
#3
Le Mans Master
I always wanted a system from Stainless Works.
A bit pricey and you would have to adapt the pipes to your headers.
Food for thought.
http://stainlessworks.net/products/p...rvette?year=64
A bit pricey and you would have to adapt the pipes to your headers.
Food for thought.
http://stainlessworks.net/products/p...rvette?year=64
The following users liked this post:
KIKIRIKI (09-30-2017)
#4
Instructor
I also have American Racing Headers on an Ls3 on my 73. Was thinking of going with Magna Flow stainless big block system, cross member back. Not quite as pricey as the Stainless Works system.
The following users liked this post:
KIKIRIKI (09-30-2017)
#5
Burning Brakes
i have SS side pipes on my LS3 swap look at them on page 13 -14
https://www.corvetteforum.com/forums...estration.html
link to where i got mine
https://www.gpheaders.com/project/c3...epipe-headers/
https://www.corvetteforum.com/forums...estration.html
link to where i got mine
https://www.gpheaders.com/project/c3...epipe-headers/
Last edited by Tim 1973; 09-30-2017 at 12:40 AM.
The following users liked this post:
KIKIRIKI (09-30-2017)
#6
Drifting
Member Since: Nov 2004
Posts: 1,624
Received 287 Likes
on
128 Posts
2020 C3 of the Year Finalist - Modified
There are a few manufacturers out there for ls sidepipe headers. Somewhat reasonable price if yiu consider buying a ss set for sbc or bbc and paying someone to rework the flanges for the ls.
[url=https://flic.kr/p/VETzA6]
[url=https://flic.kr/p/VETzA6]
Last edited by bluegtp; 09-30-2017 at 02:06 AM.
The following users liked this post:
KIKIRIKI (09-30-2017)
#7
i have SS side pipes on my LS3 swap look at them on page 13 -14
https://www.corvetteforum.com/forums...estration.html
link to where i got mine
https://www.gpheaders.com/project/c3...epipe-headers/
https://www.corvetteforum.com/forums...estration.html
link to where i got mine
https://www.gpheaders.com/project/c3...epipe-headers/
#8
Burning Brakes
I talked to the makers and they said the sensors will read with out issues. I have not tuned them yet but the engine runs fine. My tuner will come buy after I get back from Europe at the end of the Oct. I will have a month home in Texas to do some work on it.
The price??? Way to much... somewhere around 3K
The price??? Way to much... somewhere around 3K
Last edited by Tim 1973; 09-30-2017 at 03:58 PM.
#9
I talked to the makers and they said the sensors will read with out issues. I have not tuned them yet but the engine runs fine. My tuner will come buy after I get back from Europe at the end of the Oct. I will have a month home in Texas to do some work on it.
The price??? Way to much... somewhere around 3K
The price??? Way to much... somewhere around 3K
#10
Drifting
Member Since: Nov 2004
Posts: 1,624
Received 287 Likes
on
128 Posts
2020 C3 of the Year Finalist - Modified
Maybe someone else can come in about regular ss header options.
Last edited by bluegtp; 10-01-2017 at 12:29 AM.