Holiday Pay It Forward 2017
#121
Red Road Warrior
Member Since: Dec 2000
Location: Lansdale 19446 PA
Posts: 3,341
Received 282 Likes
on
199 Posts
St. Jude Donor '10-'11, '15, '19
Headlight trim Rings
I have a brand new, in the box, set of headlight trim rings (4) that I do not need. My originals cleaned up real nice.
I don't think I need a picture but let me know if you do. New and have never been out of the box
John
I don't think I need a picture but let me know if you do. New and have never been out of the box
John
Last edited by Go Vette Go; 12-16-2017 at 06:54 PM.
The following users liked this post:
AllC34Me (12-17-2017)
#123
Le Mans Master
#124
Le Mans Master
If a 74 owner can use this, here is a dash wiring diagram with AC.
It makes it easy with the wire color and the actual pics of the connectors.
It makes it easy with the wire color and the actual pics of the connectors.
Last edited by John 65; 12-21-2017 at 11:12 PM.
The following users liked this post:
AllC34Me (12-17-2017)
#125
Instructor
#126
Le Mans Master
You got it Jeff. Merry Christmas and happy Holidays.
Will get it out tomorrow.
John
Will get it out tomorrow.
John
The following users liked this post:
AllC34Me (12-18-2017)
#128
Burning Brakes
Greetings all. I've read the annual holiday parts threads for some years now. Although I don't have many spare parts I can part with, I've been somewhat jealous of those who do. I'm much more of a tinkerer than parts collector besides the original L46 hard to get parts I've been able to find.
As some of you know, I dabble in finding better ways to build things. One of my customers asked me to come up with a better "T" connector to supply the heater/ac control vacuum supply that comes off the 5/16" main vacuum hose. What I've come up with is a custom made connector that is built from ABS high impact plastic and brass sleeved on the small port to eliminate it from breaking off. It's not configured as original, but will more than do the job. These measure .330 (21/64) on the large ports, and .156 (5/32)on the small port. Connects 5/16" & 1/8" hoses. Pictures below.
Here's the deal. If you've posted something to give away here, I will ship you one free. I have 10 to give away, and if needed I can make more. Please post here in the thread, and PM me your address.
As some of you know, I dabble in finding better ways to build things. One of my customers asked me to come up with a better "T" connector to supply the heater/ac control vacuum supply that comes off the 5/16" main vacuum hose. What I've come up with is a custom made connector that is built from ABS high impact plastic and brass sleeved on the small port to eliminate it from breaking off. It's not configured as original, but will more than do the job. These measure .330 (21/64) on the large ports, and .156 (5/32)on the small port. Connects 5/16" & 1/8" hoses. Pictures below.
Here's the deal. If you've posted something to give away here, I will ship you one free. I have 10 to give away, and if needed I can make more. Please post here in the thread, and PM me your address.
The following 5 users liked this post by Dave J:
AllC34Me (12-18-2017),
bmans vette (12-18-2017),
marshal135 (12-18-2017),
nix1981 (12-18-2017),
Rescue Rogers (12-18-2017)
#129
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Thank you for your kindness. Very generous of you and I'm sure it is appreciated.
Best regards,
David Howard
AllVettes4Me
Best regards,
David Howard
AllVettes4Me
Last edited by AllC34Me; 12-17-2017 at 09:35 PM.
#130
Instructor
don't have a picture with me right now, but I'm am sure it isn't needed for a set of exhaust manifolds for an '81 with the AIR tubes still attached. My car will never be original again so if someone is trying to put their car back to original condition and you need exhaust manifolds , I got 'em for you.
#131
Instructor
C-3 Radiator
I have a factory stock heavy duty radiator that came in my 78 Indy Pace Car. It is in very good condition and worked fine when I removed it and replaced it with a Dewitts aluminum radiator. If anyone can use it, it's yours if you will just pay for the shipping. BTW, my car has AC and automatic transmission.
#132
Le Mans Master
My parking brake hardware and pads have arrived, so thanks again to David and Nick and everyone who has contributed in this years pay it forward.
Merry Christmas and happy holidays to all.
John
Merry Christmas and happy holidays to all.
John
#133
Burning Brakes
Hi everyone!
Sorry I'm so late jumping in ! When I first saw this I only had a chance to read part of it and got interrupted and then work got crazy busy ! Last week I gave away and shipped a full set of taillights to someone just trying to find a set on the parts page but today I found a little time and went and took pics of a few things I have from a 79 that I hope someone can use ! First up ;
One set is clean the other set will clean up and I might be able to do that before they get sent !
Second up ;
I think these were dyed red and were black original, plastic mount inside appears to be in good shape and screws in one set!
Third up ;
Only have this one !
Fourth up;
This was a gift to me by none other than David Howard himself and just trying to pass it along to someone that can use it ! This is from a 78 Silver Anniversary! I planned on giving the emblem to a friend of mine that has a 78 SA but he doesn't know it yet and it would just be an extra for him so if really needed I'll send it too !
That's all I have for now that I have pics of !
If possible if they are not claimed yet there are a couple things that I need for my build !
1 is a set of black door handles !
I believe that Greg offered the door handles!
2nd is a set of seat belt covers!
I believe that John65 offered these covers !
Will even pay shipping if you wish!
Hoping everyone has a very Merry Christmas and a prosperous New Year!
A special shout out to David for his generosity and the standard that he sets in all he does !
Sorry I'm so late jumping in ! When I first saw this I only had a chance to read part of it and got interrupted and then work got crazy busy ! Last week I gave away and shipped a full set of taillights to someone just trying to find a set on the parts page but today I found a little time and went and took pics of a few things I have from a 79 that I hope someone can use ! First up ;
One set is clean the other set will clean up and I might be able to do that before they get sent !
Second up ;
I think these were dyed red and were black original, plastic mount inside appears to be in good shape and screws in one set!
Third up ;
Only have this one !
Fourth up;
This was a gift to me by none other than David Howard himself and just trying to pass it along to someone that can use it ! This is from a 78 Silver Anniversary! I planned on giving the emblem to a friend of mine that has a 78 SA but he doesn't know it yet and it would just be an extra for him so if really needed I'll send it too !
That's all I have for now that I have pics of !
If possible if they are not claimed yet there are a couple things that I need for my build !
1 is a set of black door handles !
I believe that Greg offered the door handles!
2nd is a set of seat belt covers!
I believe that John65 offered these covers !
Will even pay shipping if you wish!
Hoping everyone has a very Merry Christmas and a prosperous New Year!
A special shout out to David for his generosity and the standard that he sets in all he does !
#134
Melting Slicks
Finally found time to get some pics together.
As usual David's generosity sets the tone for a great thread and Christmas....
I have these 3 to start.
All of them are small items so I'll throw in the shipping also...ConUSA only please.
ARP Flex plate bolts
Set of side mirrors with mounting plate taped on. These are plastic and could be used on any other car also.
PM me your address after confirming with me here.
Merry Christmas and Happy Holidays to you all!
As usual David's generosity sets the tone for a great thread and Christmas....
I have these 3 to start.
All of them are small items so I'll throw in the shipping also...ConUSA only please.
ARP Flex plate bolts
Set of side mirrors with mounting plate taped on. These are plastic and could be used on any other car also.
PM me your address after confirming with me here.
Merry Christmas and Happy Holidays to you all!
#136
Just another Corvette guy
The following users liked this post:
SPCL FX (12-22-2017)
#137
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
My gifts are to large to ship. So this is for local pick-up. Zip code 07832
Used luggage racks I'd call them wall art as they are not complete. They are rusty and have chrome peeling
Next was given to me by a forum member. So please don't take them just to resell them. That would be uncool.
In any event I have a pair of NEW mufflers for what I believe to be for a early C3 low HP Small Block car.
Used luggage racks I'd call them wall art as they are not complete. They are rusty and have chrome peeling
Next was given to me by a forum member. So please don't take them just to resell them. That would be uncool.
In any event I have a pair of NEW mufflers for what I believe to be for a early C3 low HP Small Block car.
Admittedly I have been looking at your two styles of luggage racks and those are in such good shape I wish we could get them back into service as well. I have legs I received some time back that could be used with one of the sets if you do locate someone that can use them.
Anyway, let me know about the mufflers please and if you want the legs to the luggage rack let me know that too please and I can bring them along.
Thank you and best regards,
David Howard
AllVettes4Me
#139
Le Mans Master
I have to offer what I believe to be a 1968-1971 Corvette 8" Day/Night Mirror Original Condition GM# 916177
The mount is tight and the housing is good but it needs a new glass which any Corvette parts dealer sells.
The mount is tight and the housing is good but it needs a new glass which any Corvette parts dealer sells.
The following users liked this post:
AllC34Me (12-22-2017)