Rvzio new 71 restore
#161
Race Director
What happened with that convertsion you were doing?
Last edited by derekderek; 04-26-2019 at 06:47 AM.
#162
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Roger, you have made excellent progress and remain an inspiration to me to keep moving forward. You deserve a break but doesn't look like you are going to get one.
I have something to bounce off of you but I will do it by PM shortly. Don't want to hijack your thread and not exactly related, so watch for a PM from me.
Love your work.
David
I have something to bounce off of you but I will do it by PM shortly. Don't want to hijack your thread and not exactly related, so watch for a PM from me.
Love your work.
David
#163
Safety Car
Thread Starter
Roger, you have made excellent progress and remain an inspiration to me to keep moving forward. You deserve a break but doesn't look like you are going to get one.
I have something to bounce off of you but I will do it by PM shortly. Don't want to hijack your thread and not exactly related, so watch for a PM from me.
Love your work.
David
I have something to bounce off of you but I will do it by PM shortly. Don't want to hijack your thread and not exactly related, so watch for a PM from me.
Love your work.
David
#164
Nam Labrat
Member Since: Sep 2013
Location: New Orleans Loo-z-anna
Posts: 33,893
Received 4,173 Likes
on
2,735 Posts
I'm spitless ............errrrrr.......speechless. Vettes everywhere.
#165
Safety Car
Thread Starter
Okay, so I have been a little busy over the last couple of days. Went to Ga. yesterday to take a look at the 68 for sale. Here's what they have. It's a 68 That the farther purchased for him and his 2 sons to work on. The 2 twins were really hard workers and you could tell just by looking at them and how proud they were of all the work and time they put into it. I think the project got a little to much as we all know can happen. S everything was loaded up and off I went. Once the shop is re organized the 71 project will continue with the 69. The other exciting thing is I wanted to kind of take a break from corvettes and expand my creative juices. So I was able to find this, and down in Florida these things are loved by everyone. So going to be busey and anyone who wants to stop by to help or cheer me on are all welcome.
RVZIO
A lot of parts to unload, so it will take some time.
Some of the restored parts.
The new 1967 u14 Bronco off body restore should start somewhere around August.
RVZIO
A lot of parts to unload, so it will take some time.
Some of the restored parts.
The new 1967 u14 Bronco off body restore should start somewhere around August.
The following 2 users liked this post by SB64:
20mercury (05-09-2019),
doorgunner (05-09-2019)
#166
Race Director
How far are you from Tampa? We are gonna be down there last week of June and early July doing a feasability study on living there year round. 6k property taxes a year up here gets old.
#167
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,432
Received 6,278 Likes
on
3,915 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
I want your Bronco!!!!!!!
The following users liked this post:
rickimvette (05-10-2019)
#168
Safety Car
Thread Starter
Hey Derek, I am on the east coast probably about 3.5 hours. Yup, know what you mean, we had to do the same. Always welcome if your on 95 on the east side.
#169
Safety Car
Thread Starter
These things are off the charts when I look at ones that have sold. Still need to decide if I do it stock or get a little creative. I will pull the body and have the frame and body blasted. I had them come to my house for a frame and it was great. NPD in Ocala has all of what I would need . Maybe a coyote mtr. no more like a 302 5spd if anything. We will see. I guess I cant post my progress on this forum so you'll just have to wait.
Last edited by SB64; 05-15-2019 at 04:12 AM.
#170
Race Director
Nobody is gonna string you up cuz it says Fill Oil Repair Daily...
#171
Race Director
This Bronco would be the C1 of a Corvette, the 70's style the C2 and the 80's style the C3.
Of course every great vehicle has a C4 which in this case would be the Bronco II.
Keep us informed, it's no different than your other projects, besides it's your thread.
Of course every great vehicle has a C4 which in this case would be the Bronco II.
Keep us informed, it's no different than your other projects, besides it's your thread.
Last edited by OldCarBum; 05-09-2019 at 04:21 PM.
#172
Safety Car
Thread Starter
That's a great way to put it OCB. Very hard to find these in project form around.
#173
Safety Car
Thread Starter
It was suggested that I put the Bronco build in the other car section so I did.
https://www.corvetteforum.com/forums...post1599374149
RVZIO
https://www.corvetteforum.com/forums...post1599374149
RVZIO
#175
Safety Car
Thread Starter
Not sure just yet on what I will be doing with the 68. One option is to fix the broken 71 clip and set it on the 68 to match the rear. Put it on a rolling chassis and move it out. I could also put it on the 69 frame I have, get a 68/69 front clip. Remove the rear quarter panels and go back to the correct panels, motor, trans, etc..................................... .
Don't know at this point. Really wanted the front clip.
RVZIO
Don't know at this point. Really wanted the front clip.
RVZIO
#177
"The other exciting thing is I wanted to kind of take a break from corvettes and expand my creative juices. "
Roger ... I thought for sure you were going to build the mote!! But hey a Bronco is a nice second choice, go man go.
Dave
Roger ... I thought for sure you were going to build the mote!! But hey a Bronco is a nice second choice, go man go.
Dave
#178
Burning Brakes
Roger, I have no idea where you find the energy to do all this. I am exhausted just reading what you accomplish. Tip o' the hat to you, sir!
#179
Safety Car
Thread Starter
Today after this weeks travel I was able to finish boarding a side wall to protect the insulation better. Metal studs were 5' on center so no sheet goods really worked. Fence slats were best trimming only less then a foot. Gives it a different look as well as some wall art. Anyway cleaned up the mess after rearranging shelf's. More work space. So tomorrow I will bring in the 68 and get going on the 71 project starting with the front clip area.
RVZIO
Shop kinda the way it was .
The mess after emptying shelves.new look with better work space
New look with better work space.
RVZIO
Shop kinda the way it was .
The mess after emptying shelves.new look with better work space
New look with better work space.
The following 2 users liked this post by SB64:
Rescue Rogers (05-10-2019),
Rodnok1 (05-10-2019)
#180
Moderator
Member Since: Jul 2005
Location: Parrish FL
Posts: 26,843
Received 767 Likes
on
704 Posts
St. Jude Donor '06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16-'17-‘18-'19-'20-'21-'22-'23-'24
Today after this weeks travel I was able to finish boarding a side wall to protect the insulation better. Metal studs were 5' on center so no sheet goods really worked. Fence slats were best trimming only less then a foot. Gives it a different look as well as some wall art. Anyway cleaned up the mess after rearranging shelf's. More work space. So tomorrow I will bring in the 68 and get going on the 71 project starting with the front clip area.
RVZIO
Shop kinda the way it was .
The mess after emptying shelves.new look with better work space
New look with better work space.
RVZIO
Shop kinda the way it was .
The mess after emptying shelves.new look with better work space
New look with better work space.