1982 Collector Edition Restoration
#22
Update - Seats and Dash are here!!
The seats and dash came in yesterday! Just gotta finish installing the rear carpet, repaint the buckets and the seats will be in as well as the dash hopefully today! I will post pics once complete.
Its like Christmas morning!
She's gonna look new again!
Its like Christmas morning!
She's gonna look new again!
#24
Update
Got the new rear compartment frames painted up and glued the new carpet to the compartment doors. The rear compartment is now done. I should have the seats installed today. I decided to do a restoration on the seats rails first though. I'll post pics of that soon. Also I have the main dash shell installed. Pics on that coming this evening.
#26
I replaced the pins and they were a pain to get through the holes. I used a pair of lineman pliers to force them through. If one of the ends of the pins get bent they will not let the door close properly so you either have to cut the end off or use pliers to straighten it out. As long as the ends are straight the doors should close fine.
#29
Phoenix Graphix has the decals and stripe packages.. Somewhere around $1400 for the entire set.
The MYTH that the hinges need replacing is just that. Please search for my article on Renewing the rear hinges and rear window. I'll look for it in a while.
The hinges have reached their yield point by now....you can readjust the hatch and they will give you ANOTHER 37 years of service.
I did mine over three years ago and they haven't moved a millimeter since then.
good luck CE brothers.
UnkaHal
The MYTH that the hinges need replacing is just that. Please search for my article on Renewing the rear hinges and rear window. I'll look for it in a while.
The hinges have reached their yield point by now....you can readjust the hatch and they will give you ANOTHER 37 years of service.
I did mine over three years ago and they haven't moved a millimeter since then.
good luck CE brothers.
UnkaHal