parting a 1969 coupe
#1
Melting Slicks
Thread Starter
parting a 1969 coupe
http://forums.corvetteforum.com/att...mentid=47581418
http://forums.corvetteforum.com/att...=47581468&stc=1
http://forums.corvetteforum.com/att...=47581469&stc=1
http://forums.corvetteforum.com/att...=47581470&stc=1
http://forums.corvetteforum.com/att...=47581471&stc=1
http://forums.corvetteforum.com/att...=47581472&stc=1
http://forums.corvetteforum.com/att...=47581473&stc=1
This car has some rust in the rear kick ups. It has nice original glass with minimal repairs. Let me know what you need. I have a pending deal on the frame
Corvetteworks@aol.com
http://forums.corvetteforum.com/att...=47581468&stc=1
http://forums.corvetteforum.com/att...=47581469&stc=1
http://forums.corvetteforum.com/att...=47581470&stc=1
http://forums.corvetteforum.com/att...=47581471&stc=1
http://forums.corvetteforum.com/att...=47581472&stc=1
http://forums.corvetteforum.com/att...=47581473&stc=1
This car has some rust in the rear kick ups. It has nice original glass with minimal repairs. Let me know what you need. I have a pending deal on the frame
Corvetteworks@aol.com
#7
I would be interested in the factory radio if it's still there. Thanks, Scott
#8
- removable back glass with frame
- front crossmember with side brackets
- radiator support
- radiator
- bumpers (front and rear)
- dash pad
- gas tank (with or without pickup)
Couldn't get links to work. What kind of shape is your cage in? If good, I would have some interest in the cage and rear clip together.
Can you e-mail the pictures to ccumens@bellsouth.net?
- front crossmember with side brackets
- radiator support
- radiator
- bumpers (front and rear)
- dash pad
- gas tank (with or without pickup)
Couldn't get links to work. What kind of shape is your cage in? If good, I would have some interest in the cage and rear clip together.
Can you e-mail the pictures to ccumens@bellsouth.net?
#11
Melting Slicks
Thread Starter
I have the front clip off these sold pending payment. I carry the front fenders new, $335.00ea for the correct press molded glass. I also have the hand land fenders for $189.00ea.
Last edited by corvetteworx; 05-24-2005 at 04:19 PM.
#18
need 1969 RH inside seat belt guide
On the right hand inside of the car by the door, there is a triangular right angle type plate with bolt holes in it that the seat belt goes around. The top of the plate has a black plastic coating on it to keep the seat belt from ripping. Bolts go through this plate and attach to the outer seat belt reinforcement which is on the outside of the car. Do you know have this inside plate? The plate on the left side of the car is marked 3966693 if that helps.
thanks,
John
thanks,
John
#20
Team Owner
Member Since: Jul 2004
Location: Redondo Beach, California
Posts: 39,523
Received 546 Likes
on
374 Posts
A set of lap and shoulder belts; drivers and passengers? Also, the little chrome clip retainers that screw on to the top of the seats? These clips keep the shoulder belts in place.
Thanks
Thanks