'68 to '74 parts for sale.
#1
Guest
Posts: n/a
'68 to '74 parts for sale.
'68
All prices are set at my starting point. I will deal, especially on multiple items. Shipping is not included, but I will work with you on this also.
speedo-----$50.00
Tach with filter---$125.00
Left dash---$125.00
Cowl braces for convertible---$125.00
Right dash---$75.00
Shift plate---$75.00
Gauge bezel with gauges---$250.00
tail light housings---$15.00 each
Tail light lenses---$25.00 each
Rear bumpers----$50.00 to $200.00 each depending on condition
Outside mirrors---$20.00 to $50.00 each depending on condition
Front crossmember---$100.00
Door lock assemblies---$50.00 each
convertible doors, p/w, w/glass---$400.00 each
convertible soft top frame---$500.00
Rear deck lid (vert)---$150.00
big block rear end with capped stub axles---$400.00
Many more parts
Thanks,
George
210 213 7004
geopar@gvtc.com
All prices are set at my starting point. I will deal, especially on multiple items. Shipping is not included, but I will work with you on this also.
speedo-----$50.00
Tach with filter---$125.00
Left dash---$125.00
Cowl braces for convertible---$125.00
Right dash---$75.00
Shift plate---$75.00
Gauge bezel with gauges---$250.00
tail light housings---$15.00 each
Tail light lenses---$25.00 each
Rear bumpers----$50.00 to $200.00 each depending on condition
Outside mirrors---$20.00 to $50.00 each depending on condition
Front crossmember---$100.00
Door lock assemblies---$50.00 each
convertible doors, p/w, w/glass---$400.00 each
convertible soft top frame---$500.00
Rear deck lid (vert)---$150.00
big block rear end with capped stub axles---$400.00
Many more parts
Thanks,
George
210 213 7004
geopar@gvtc.com
Last edited by geopar; 11-13-2006 at 03:16 PM.
#3
Pro
Member Since: Jan 2006
Location: Ventura California
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
George,
Here is a picture of the lower windshield frame I am looking for. Basically, if you look at the reflections on the windshield, that is approximately the width of section I need. The section between the speakers. or at least the both sections on either side of the w/s center drop.
Here is a picture of the lower windshield frame I am looking for. Basically, if you look at the reflections on the windshield, that is approximately the width of section I need. The section between the speakers. or at least the both sections on either side of the w/s center drop.
#6
Guest
Posts: n/a
Originally Posted by ctrain22
George,
Here is a picture of the lower windshield frame I am looking for. Basically, if you look at the reflections on the windshield, that is approximately the width of section I need. The section between the speakers. or at least the both sections on either side of the w/s center drop.
Attachment 47600939
Attachment 47600935
Here is a picture of the lower windshield frame I am looking for. Basically, if you look at the reflections on the windshield, that is approximately the width of section I need. The section between the speakers. or at least the both sections on either side of the w/s center drop.
Attachment 47600939
Attachment 47600935
Thanks,
G
geopar@gvtc.com
#8
Guest
Posts: n/a
Originally Posted by robert forbes
G'DAY MATE would you have a tele tilt colum for a 68 my email address is rforbes@netconnect .com.au thank you
Sorry, there were no "factory" tilt/teles in '68; tele only.
There are quite a few posts here on retrofitting a later model t/t into a '68. Maybe someone with better computer skills than I will paste a link to this information.
I do have a couple of '69 to '75 t/t's, and the under dash supports. I'm not sure what other pieces/modifications are needed for the conversion.
G.
#9
Drifting
Member Since: Feb 2004
Location: State of Confusion!!!
Posts: 1,877
Likes: 0
Received 31 Likes
on
21 Posts
2018 C2 of Year Winner
speedo-----$50.00
big block rear end with capped stub axles---$400.00
Does the speedo have green #'s?
What ratio is the rear?? Does it need re-building??
Interested in both!!!
big block rear end with capped stub axles---$400.00
Does the speedo have green #'s?
What ratio is the rear?? Does it need re-building??
Interested in both!!!
#16
Senior Member since 1492
George, do you have the rear filler panel with reverse lights & brackets?
#17
Guest
Posts: n/a
Originally Posted by Jughead
George, do you have the rear filler panel with reverse lights & brackets?
Alll of the '68 reverse light panels are gone. I might have another set of the lights with bonding strips.I'll check and get back to you.
Thanks,
G