Parting out 75 350-4spd coupe
#1
Team Owner
Thread Starter
Parting out 75 350-4spd coupe
Adding parts as I find them
Well, after almost 15 years, its time to say goodbye to my first Corvette. It was a lot of fun but the time has come for it to give its life so that others may live.
The car was originally silver and repainted white. Its an L-48 4 speed with a black interior with power windows. The motor started knocking so I pulled it out and swapped in another motor. I then found a better 75 with a dead motor so I pulled it out and stuck the car in my shed and used it to finish another Stingray project. Now I just need to get rid of it
I have a clean MA title in my name to this car.
Here is what is not available
Exhaust, spare tire tub, rocker panel covers, transmission, bellhousing, driveshaft, door panels, dash pad, seats, heater control, e-brake cover, some interior panels. Motor is complete but knocked really bad and is out of the car. I have brand new ,never installed ,fiberglass rear bumper cover with the correct 75 only indentations also.
Well, after almost 15 years, its time to say goodbye to my first Corvette. It was a lot of fun but the time has come for it to give its life so that others may live.
The car was originally silver and repainted white. Its an L-48 4 speed with a black interior with power windows. The motor started knocking so I pulled it out and swapped in another motor. I then found a better 75 with a dead motor so I pulled it out and stuck the car in my shed and used it to finish another Stingray project. Now I just need to get rid of it
I have a clean MA title in my name to this car.
Here is what is not available
Exhaust, spare tire tub, rocker panel covers, transmission, bellhousing, driveshaft, door panels, dash pad, seats, heater control, e-brake cover, some interior panels. Motor is complete but knocked really bad and is out of the car. I have brand new ,never installed ,fiberglass rear bumper cover with the correct 75 only indentations also.
Last edited by Fastguy; 12-11-2008 at 09:23 PM.
#3
Team Owner
Thread Starter
#6
Team Owner
Thread Starter
#7
Team Owner
Thread Starter
Not sure but I know it is not original to the car, I found an old receipt from when it was swapped by the prior owner in the 80's. It *might* be a 3.54. I haven't driven the car since 1998 but I don't remember it making any noise. That may be too heavy to ship. I have no idea how much it weighs. I'd take $400 for it.
#10
Team Owner
Thread Starter
I have the cap, not sure if the ws is original. I think the starter motor is in my 70. How do I check to see if its original to the 75?
#14
Team Owner
Thread Starter
The front plastic grilles or the pot metal rear deck and hood grilles?
The plastic is good, the metal are a little pitted.
The left grille has one broken tab, both have wear marks from where they contact the urethane.
The plastic is good, the metal are a little pitted.
The left grille has one broken tab, both have wear marks from where they contact the urethane.
Last edited by Fastguy; 12-08-2008 at 08:18 PM.
#15
Team Owner
Thread Starter
here they are, currently using them to keep dust out of my 70 until my other tops come back from the painter.
I actually like the two tone.
Last edited by Fastguy; 12-08-2008 at 08:23 PM.
#16
Team Owner
Thread Starter
#17
Team Owner
Thread Starter
#18
Team Owner
Thread Starter
ok, here are some pics and prices of stuff.
Parts for a 4-speed conversion: shifter, floor boot, shifter console and plate, Z bar with rod, pedals (not pictured) $250 Sold, except for shifter $40
Blower with fan: $10
Shroud for non AC car, does not have extension but has brackets: $100
RH Dash with map pockets: $125 sold
LH dash section with speedo that works and tach that doesn't: $200 sold
Marker lights: Amber $25 a pair, red $30 a pair,sold hood grille and rear deck grilles sold, LH mirror $20, turn signals $50 pair, tail light and backup light set sold,
GM 454 emblems sold
owner's manual sold
gauge bezel is broken, clock is dead, all other gauges worked including wiper switch sold
Jensen Stereo for C3 $20
door handle mechanism $10, latchy thing with rods $10, chrome shield, dirty, has some overspray $15, big chrome shield $40, regulator $15, rear defroster duct sold
Parts for a 4-speed conversion: shifter, floor boot, shifter console and plate, Z bar with rod, pedals (not pictured) $250 Sold, except for shifter $40
Blower with fan: $10
Shroud for non AC car, does not have extension but has brackets: $100
RH Dash with map pockets: $125 sold
LH dash section with speedo that works and tach that doesn't: $200 sold
Marker lights: Amber $25 a pair, red $30 a pair,sold hood grille and rear deck grilles sold, LH mirror $20, turn signals $50 pair, tail light and backup light set sold,
GM 454 emblems sold
owner's manual sold
gauge bezel is broken, clock is dead, all other gauges worked including wiper switch sold
Jensen Stereo for C3 $20
door handle mechanism $10, latchy thing with rods $10, chrome shield, dirty, has some overspray $15, big chrome shield $40, regulator $15, rear defroster duct sold
Last edited by Fastguy; 01-04-2009 at 05:35 PM.
#20
Team Owner
Thread Starter
Rear bumper cover $250, brand new, never mounted and has correct 75 only indentations. This may be too big to ship safely/cheaply