vettesbydesign

Bob...it is 4 of them.I just bought a set of TT2s from a forum member,and don't plan to use these anymore.
I want your money,bud,but these are all 4 10x15s,and my car had 1/2"spacers on it to clear,and to be able to turn w/out hitting up front.If your frontend isn't set up right,and the rear...you ARE going to damage your fiberglass.Also,these were on a flared car.On a side note...I have some rear ZL1 flares for sale too!!!!
I was running the fronts,but they are 35 year old Firestone soft compound road race tires.I burnt one of the backs up,and had poor alignment,so one of the backs is toast.It holds air fine,but not usable,and really the fronts need replaced,and are illegal to run on the streets,so you need tires.
They were on a show car,and are very old,but this car sat in a garage on the west coast,and they clean up very nice.

starbucks

is the

68 non-AC inner/outer heater boxes w/fan,heater core,and roller control....80.00 shipped.. available?

I need it for a client..

vettesbydesign

Yes...it's available,bud.It was from a parted wrecked car,and tested the fan yesterday since it's been sitting for a couple years,and works fine.

R1234

I'm looking for the oblong rubber grommet that snaps into the 68 with a/c radiator support. The upper condenser a/c line goes through it. Have one?
Thanks,
Bryan

vettesbydesign

That I don't have.All the 68s that I have had are non-air cars.Well,except one from yesteryear.I believe in 69 that the lines started going thru the inner fender,then down.I have those pieces.Sorry.

R1234

Yep, another one of those 68 oddities. Thanks for the reply and have a Merry Christmas!

vettesbydesign

What's the name of the place down there that bought Mich.Corvette Recyclers?Thay are in FL,and I have had some good dealings w/them.They have alot of stuff,and pretty sure that a place down there bought the Yagers C3 junk yard stash.

R1234

I'm not sure, I live in Northwest Florida. It's a dead zone for Corvette parts. It wasn't for the internet, I'd still be a long way from finishing my 68 vert.

Robertp535

Could you send pic of no. 10 [ 71 lt1 console plate] Thanks Bob bpassarell@wowway.com

AzMotorhead

PM sent

vettesbydesign

Bob here is the shift plate.It's dirty,but original,and has the correct cig lighter,ashtray,and door,and.....whoopp-whoooop....a REAL LT1 old data plate!!!!

John 65

Kevin, may be interested in # 36. PM sent. Thanks.

vettesbydesign

Back at ya....

CCrane65

Got a pair of bumperette mounting brackets and bolts for 70-72?

vettesbydesign

They are promised to a guy buying the complete frontend steel setup.Sorry.

kellyr073

Cool 68! I have a 71 in green with Hooker sides. Thanks for the pics, didnt realize how wide the 10's would be, and they definately require flares, and I'm not a body man. I Just gotta get me some Cragars though! Thanks, but I'll have to pass on these.

Bob

vettesbydesign

No problem.I wanted you to see what you were getting into.Look on ebay.So many guys are going 16s/17s that the Cragars can be had pretty reasonable.new...they arn't that bad,either.

vettesbydesign

P{arts added.....

58636566

Do you by chance have the rods/braces that mount under the dash? Let me know. Thanks.

vettesbydesign

Come on fellas....tax time is coming.I am open to offers.Reeeaaaassssonable offers.