NEW Sanden 510 A/C pump & brackets 79...$200
05-17-2009, 05:57 PM
#1
Race Director
Thread Starter
NEW Sanden 510 A/C pump & brackets 79...$200
This is the new Sanden 510 pump, an upgrade from the 508, it is polished. this pump is NEW never used, as are the brackets and some plumbing. It is from Old Air Products, in original box with CD... I simply changed my mind and decided not to install it after all.
I paid about $275 with brackets and plumbing, letting it go for $200 firm.
Here are the specs:Specs
Displacement: 209.5cc
Maximum RPM: 11,000
Maximum continuous RPM: 7,000
Compressor weight: 21 lbs (19.5 kg)
Performance Data
Calorimetric Data (Typical) @ 800 RPM
Capacity: 20,500Btu
Volumetric Efficiency: 78%
Isentropic Efficiency: 64%
Power Consumption: 3.0 HP
Calorimetric Data (Typical) @ 2,000 RPM
Capacity: 22,200Btu
Volumetric Efficiency: 60%
Isentropic Efficiency: 55%
Power Consumption: 5.1HP
Thank you, Paul
I paid about $275 with brackets and plumbing, letting it go for $200 firm.
Here are the specs:Specs
Displacement: 209.5cc
Maximum RPM: 11,000
Maximum continuous RPM: 7,000
Compressor weight: 21 lbs (19.5 kg)
Performance Data
Calorimetric Data (Typical) @ 800 RPM
Capacity: 20,500Btu
Volumetric Efficiency: 78%
Isentropic Efficiency: 64%
Power Consumption: 3.0 HP
Calorimetric Data (Typical) @ 2,000 RPM
Capacity: 22,200Btu
Volumetric Efficiency: 60%
Isentropic Efficiency: 55%
Power Consumption: 5.1HP
Thank you, Paul
05-18-2009, 11:37 PM
#4
Instructor
Member Since: May 2005
Location: Sheffield Alabama
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
are the brackets included all the brackets needed to bolt it up? when my compressor gave out on my 79 i took it and all the brackets off. and promptly lost every bit of it. this could be exactly what i need.
05-19-2009, 08:00 AM
#5
Burning Brakes
I am still interested in your set up. Do you have any idea if the brackets will clear tall valve covers? I have short one's now but I would also like to keep my options open. If you don't want to post pics. please send them to my email address listed above.
Thanks, Wilson
Last edited by wills670; 05-19-2009 at 08:05 AM.
05-20-2009, 12:17 AM
#6
Race Director
Thread Starter
sorry for the wait... been a busy week... here are the pics i have, so... what you see is what you get,,,and yes I have it for sale also, for more at the unmentionable site.. thank you for your patience..
05-20-2009, 12:19 AM
#7
Race Director
Thread Starter
I am still interested in your set up. Do you have any idea if the brackets will clear tall valve covers? I have short one's now but I would also like to keep my options open. If you don't want to post pics. please send them to my email address listed above.
Thanks, Wilson
05-20-2009, 08:45 AM
#9
Instructor
Member Since: May 2005
Location: Sheffield Alabama
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
im still interested, but am slightly confused. the compressor that came off my 79 was the pancake style. but i can replace it with this?..im guessing thats why the extra brackets and fittings are there.
do you think you could take a pic of the instructions. so i can maybe figure out if i will need to but new brackets too.
thanks
do you think you could take a pic of the instructions. so i can maybe figure out if i will need to but new brackets too.
thanks
05-22-2009, 11:25 AM
#10
Race Director
Thread Starter
sorry... scanner is fubar...... but most all instruction is on CD that is supplied... the unit comes from http://www.oldairproducts.com/catalog/
you can call them, I believe they would be of greater help... p:-)
you can call them, I believe they would be of greater help... p:-)
