Wanted, 396-375hp heads
07-20-2009, 03:38 PM
#2
Melting Slicks
Member Since: Feb 2001
Location: Europe , Luxembourg
Posts: 3,304
Likes: 0
Received 3 Likes
on
3 Posts
Hi
This are ordinary L71 solid lifter heads, the same installed on L71 Vettes, aren't they ?
I have a 68 Camaro 396 CI 375 HP engine + heads, dated early 68.
The block is bored to 427 CI .030 over about 20.000 Miles ago.
What dates are you looking for ?
Rgds. Günther
This are ordinary L71 solid lifter heads, the same installed on L71 Vettes, aren't they ?
I have a 68 Camaro 396 CI 375 HP engine + heads, dated early 68.
The block is bored to 427 CI .030 over about 20.000 Miles ago.
What dates are you looking for ?
Rgds. Günther
07-21-2009, 08:45 AM
#3
More Specific Info?
Which heads exactly are you looking to locate??
The '67 Camaro with the 396"/375 should use the "3873858" heads. These were used on the Chevelles, the 427" Vettes, and the 396"/427" Impalas!
Thanks, Gary in N.Y.
P.S. I know of at least 10 heads here on Long Island, 2 of which I have in my possession for a '66 427" Vette resto. I don't personally own any of these and I hope they aren't the specific ones you need. They sell for "telephone numbers"! I believe they are the only castings that have the (4) 1/4-20 holes adjacent to all the exhaust ports??
The '67 Camaro with the 396"/375 should use the "3873858" heads. These were used on the Chevelles, the 427" Vettes, and the 396"/427" Impalas!
Thanks, Gary in N.Y.
P.S. I know of at least 10 heads here on Long Island, 2 of which I have in my possession for a '66 427" Vette resto. I don't personally own any of these and I hope they aren't the specific ones you need. They sell for "telephone numbers"! I believe they are the only castings that have the (4) 1/4-20 holes adjacent to all the exhaust ports??
07-22-2009, 07:57 AM
#5
Melting Slicks
Thread Starter
Member Since: Sep 2008
Location: Cherokee National Forest TN
Posts: 2,376
Likes: 0
Received 102 Likes
on
92 Posts
Which heads exactly are you looking to locate??
The '67 Camaro with the 396"/375 should use the "3873858" heads. These were used on the Chevelles, the 427" Vettes, and the 396"/427" Impalas!
Thanks, Gary in N.Y.
P.S. I know of at least 10 heads here on Long Island, 2 of which I have in my possession for a '66 427" Vette resto. I don't personally own any of these and I hope they aren't the specific ones you need. They sell for "telephone numbers"! I believe they are the only castings that have the (4) 1/4-20 holes adjacent to all the exhaust ports??
The '67 Camaro with the 396"/375 should use the "3873858" heads. These were used on the Chevelles, the 427" Vettes, and the 396"/427" Impalas!
Thanks, Gary in N.Y.
P.S. I know of at least 10 heads here on Long Island, 2 of which I have in my possession for a '66 427" Vette resto. I don't personally own any of these and I hope they aren't the specific ones you need. They sell for "telephone numbers"! I believe they are the only castings that have the (4) 1/4-20 holes adjacent to all the exhaust ports??
"391" heads.
I do not have much experience with the big motors as far as correct #'s go, just trying to put something together & get the restoration job.
Regards,
CK
07-26-2009, 02:22 PM
#8
Racer
Member Since: Aug 2005
Location: Fairbanks Alaska
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
"391" heads
CK,
I have a pair of "391" heads. They have not been rebuilt yet. No porting, helicoils or modifications. I have had them boiled and magged. They are a matching pair, dated D17. I also have a late J-'65 dated, 4 bolt 942 block. Fresh at .030". Send me an email please: ak67camaro@yahoo.com.
Thanks,
Jim.
I have a pair of "391" heads. They have not been rebuilt yet. No porting, helicoils or modifications. I have had them boiled and magged. They are a matching pair, dated D17. I also have a late J-'65 dated, 4 bolt 942 block. Fresh at .030". Send me an email please: ak67camaro@yahoo.com.
Thanks,
Jim.
