Fs: Sbc hydraulic roller cams/lifters
05-09-2013, 12:59 PM
#1
Race Director
Thread Starter
Fs: Sbc hydraulic roller cams/lifters
I HAVE TWO SMALL BLOCK CHEVY HOWARDS ROLLER CAMS AND ONE SET OF STREET SERIES HYDRAULIC ROLLER LIFTERS THAT ARE ESSENTIALLY NEW PIECES. THEY WERE RUN AS DYNO TEST PIECES AND BOTH CAMS HAVE LESS THAN 1/2 HOUR RUNNING TIME. THE LIFTERS WERE RUN WITH BOTH CAMS SO HAVE ABOUT 1 HOUR TOTAL TIME. YOU CAN FIND THE SPECS AT WWW.HOWARDSCAMS.COM. UNDER PART NUMBERS 111145-10 AND 110885-10.
BOTH HAVE EXCELLENT LOW END TORQUE AND ARE GOOD FROM 1500 TO 5500 RPM for the 111145 and 1800 to 5800 RPM for the 110885. ROLLER LIFTER P/N IS 91164N. BOTH GOOD FOR 350 TO 383 ENGINES.
I WOULD LIKE TO GET $150 EACH FOR THE CAMS AND $250 FOR THE LIFTERS. BUY BOTH CAMS AND LIFTERS FOR $500. THAT'S $400 OFF THE RETAIL PRICE FOR ALMOST NEW PIECES.
I'LL PAY SHIPPING IF YOU TAKE THE WHOLE LOT.
THANKS,
DAVE
BOTH HAVE EXCELLENT LOW END TORQUE AND ARE GOOD FROM 1500 TO 5500 RPM for the 111145 and 1800 to 5800 RPM for the 110885. ROLLER LIFTER P/N IS 91164N. BOTH GOOD FOR 350 TO 383 ENGINES.
I WOULD LIKE TO GET $150 EACH FOR THE CAMS AND $250 FOR THE LIFTERS. BUY BOTH CAMS AND LIFTERS FOR $500. THAT'S $400 OFF THE RETAIL PRICE FOR ALMOST NEW PIECES.
I'LL PAY SHIPPING IF YOU TAKE THE WHOLE LOT.
THANKS,
DAVE
Last edited by claysmoker; 05-10-2013 at 11:25 AM.
