'68--'72 parts
#221
oh ..also..i'm going to have to build front cap...need both front fenders,hood surround,BBC rad. shroud..rear valance panel...let me know what you have..if I need to communicate with you differently,let me know..I'm new on here..thanks...be glad to call if you need me to...thanks
#222
1968 hood latch
Rear bumpers, better condition than photo shows, these can be used as nice drivers, no rust, not bent, originals.
$75.00 per have several
Have all bumper brackets $5.00 to $10.00 per
Removable rear glass storage trays--fiberboard.
Both need repair, but both work as is.
$45.00 per
Have a set of spring hinges for these---$40.00 pair
'68/9 floor coupe pan/trans tunnel/rear clip halo.
$150.00 (pick up only)
Spare tire tubs and lids.
Nice ones (no cracks or rash) $100.00
Ones with cracks or small damage---$60.00
Have mounting hardware---'68 only $70.00---'69/'75 $35.00
Rally wheels, 15x8, original, mixed dates, all AZ---$50.00 per
Some aluminum slot wheels, 15", various widths (8", 8 1/2", 10", maybe some wider?)--$50.00 per
Chromed "Daiseys" 15x10 --$50.00 per
'68 birdcage. nice, no rust, excellent rocker channels and posts. Has had the windshield frame removed.
$250.00 (pick up only)
Windshield wiper door pieces and complete units (some '68 only, some for '69-'72)
Grills-----------$100.00
Doors----------$125.00
Mechanisms----$225.00
Long stainless--$100.00
Fender caps----$50.00 pair---$75 pair for '68
Coffee can actuators--$50.00 --$100.00 depending on condition of plating (all work)
Pie pan actuators $ same as above
Misc. brackets --$5.00 to $10.00
'68 wiper arms--$50.00 per Do not have any '69 arms with brass tubes)
Wiper transmissions--$75.00
'68 wiper motors---$100.00 per
'69 wiper motors with headlight washer set up---$250.00
all components for under dash controls (pull down switches, override switches, mounting brackets---$5.00 to $40.00
Dash mounted wiper switches---$20.00
'68 only upper vent bezels (where wiper switch mounts) $50.00 also have '69-'75
Solenoid behind tachometer---$50.00 (all tested and work)
Vents, ducting, fans, vacuum reservoirs--$15.00 to $80.00
Front and rear sway bars (different sizes, not all photographed)--$50.00 to $100.00
4-speed and automatic pedal assemblies ('68 and '69-'75)
'68 4-speed--$150.00
all others---- $125.00
'68 only brake light switch---$125.00
Complete rear---1969 427 Heavy duty positraction ---assembled, rebuilt---center posi, half shafts, trailing arm assemblies, rear spring, upper cross-member, rear sway bar, rear calipers, shocks.
This is an FA coded 3:70.1 posi with 7 leaf rear spring and bolted half-shafts (not the "U" strap attachment).
Asking $1,500.00 (can ship, but large and heavy and require crating)
Fiberboard rear compartment doors---$20.00 to $35.00 per
Trailing arm assemblies, A-Arms, Power Brake Boosters, Front spindle assemblies (small --'68 and earlier)---$50.00 t0 $250.00 (not all shown in photograph)
Center caps for ralley wheels, all original, most in excellent condition, some need paint touch-up.
1) nice ones---$30.00
2) good drivers-$20.00
3) needing touch-up--$15.00
Have 40 or 50 of these.
Trim rings--have 50 or so
New in the box GM issue with clips rotated off of valve stem hole--$100.00 per or $350.00 for set of four (OBO)
Nice originals---(early design) --$125.00 per
small dents or curb rash early originals--$50.00 per
Nice 2nd design originals-----$ 100.00 per
Driver 2nd design originals---$ 40.00 per
After market rings--$10.00 per
Exhaust pipes and mufflers (new), some 2" some 2 1/2"---$30.00 to $60.00 Many more not photoed.
Gas tanks (with and without return line nipples), filler neck assemblies, vented and non vented caps, many more not shown.
Some look as new, but even the ones with light surface (on outside only) are clean and sound.
1) Tanks---$75.00
2) filler neck assemblies--$50.00
3) caps) ---$10.00 to $50.00
Also have straps, original bolts, tank support brackets, and fuel door lids/assemblies (sorry no Original '68 only doors with emblem rivets in place).
Original tail light panels (have 4 or 5)---$225.00 per
'68 frame with rear trailing arm assemblies. Cowl back coupe body, nice windshield frame, rockers, up-rights. Rear fenders and tail light panel removed.
Straight frame, surface rust, (think this is a 4 speed frame, covered in my shipping boxes now)----Asking $2,000.00 with body, $1,500.00 without OBO. Also have nice set of '68 doors
Oil Pans---$50.00 to $250.00
Front and rear bumper brackets, extensions, etc. (not all shown)---$5.00 to $50.00 per
Front bumpers and bumpperettes----$100.00 to $400.00
Rear springs
1) 7 leaf from a '67 big block---$125.00
2) 9 leafs ---$75.00
Transmissions (look up my other ads for complete coding) $550.-- to $750.00
Early dated '68 (1967 dates for a '68 427) big block water pump, alternator and starter.
1)---SOLD--- water pump---$125.00---SOLD---have two more
2) alternator-----$200.00
3)---SOLD--- starter--------$200.00---SOLD
'69 original side pipe pieces and parts including good insulators, some pieces re-chromed)----$50.00 to $200.00 (not all pieces shown)
'69 to '75 steering wheels----$50.00 to $100.00 (not all shown).
Wiring harnesses, '68 and '69, a/c and non, all with good fiber optics and all complete.
1) engine----$50.00
2) front light w/optics---$125.00
3) '68 dash with a/c-----$200.00
4) '68 dash w/o a/c-----$175.00
5) '69 dash with a/c----$175.00
6) '69 dash w/o a/c-----$150.00
7) '68 and/or '69 rear lights with fiber optics---$100.00
Have mics harnesses---p/w, '68 rear interior lights with housings/lenses, clips, sockets, plugs, etc., etc.
More to come,
George
210 748 4693[IMG]resource://skype_ff_extension-at-jetpack/skype_ff_extension/data/call_skype_logo.png[/IMG]210 748 4693
geopar@gvtc.comCall
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype
$75.00 per have several
Have all bumper brackets $5.00 to $10.00 per
Removable rear glass storage trays--fiberboard.
Both need repair, but both work as is.
$45.00 per
Have a set of spring hinges for these---$40.00 pair
'68/9 floor coupe pan/trans tunnel/rear clip halo.
$150.00 (pick up only)
Spare tire tubs and lids.
Nice ones (no cracks or rash) $100.00
Ones with cracks or small damage---$60.00
Have mounting hardware---'68 only $70.00---'69/'75 $35.00
Rally wheels, 15x8, original, mixed dates, all AZ---$50.00 per
Some aluminum slot wheels, 15", various widths (8", 8 1/2", 10", maybe some wider?)--$50.00 per
Chromed "Daiseys" 15x10 --$50.00 per
'68 birdcage. nice, no rust, excellent rocker channels and posts. Has had the windshield frame removed.
$250.00 (pick up only)
Windshield wiper door pieces and complete units (some '68 only, some for '69-'72)
Grills-----------$100.00
Doors----------$125.00
Mechanisms----$225.00
Long stainless--$100.00
Fender caps----$50.00 pair---$75 pair for '68
Coffee can actuators--$50.00 --$100.00 depending on condition of plating (all work)
Pie pan actuators $ same as above
Misc. brackets --$5.00 to $10.00
'68 wiper arms--$50.00 per Do not have any '69 arms with brass tubes)
Wiper transmissions--$75.00
'68 wiper motors---$100.00 per
'69 wiper motors with headlight washer set up---$250.00
all components for under dash controls (pull down switches, override switches, mounting brackets---$5.00 to $40.00
Dash mounted wiper switches---$20.00
'68 only upper vent bezels (where wiper switch mounts) $50.00 also have '69-'75
Solenoid behind tachometer---$50.00 (all tested and work)
Vents, ducting, fans, vacuum reservoirs--$15.00 to $80.00
Front and rear sway bars (different sizes, not all photographed)--$50.00 to $100.00
4-speed and automatic pedal assemblies ('68 and '69-'75)
'68 4-speed--$150.00
all others---- $125.00
'68 only brake light switch---$125.00
Complete rear---1969 427 Heavy duty positraction ---assembled, rebuilt---center posi, half shafts, trailing arm assemblies, rear spring, upper cross-member, rear sway bar, rear calipers, shocks.
This is an FA coded 3:70.1 posi with 7 leaf rear spring and bolted half-shafts (not the "U" strap attachment).
Asking $1,500.00 (can ship, but large and heavy and require crating)
Fiberboard rear compartment doors---$20.00 to $35.00 per
Trailing arm assemblies, A-Arms, Power Brake Boosters, Front spindle assemblies (small --'68 and earlier)---$50.00 t0 $250.00 (not all shown in photograph)
Center caps for ralley wheels, all original, most in excellent condition, some need paint touch-up.
1) nice ones---$30.00
2) good drivers-$20.00
3) needing touch-up--$15.00
Have 40 or 50 of these.
Trim rings--have 50 or so
New in the box GM issue with clips rotated off of valve stem hole--$100.00 per or $350.00 for set of four (OBO)
Nice originals---(early design) --$125.00 per
small dents or curb rash early originals--$50.00 per
Nice 2nd design originals-----$ 100.00 per
Driver 2nd design originals---$ 40.00 per
After market rings--$10.00 per
Exhaust pipes and mufflers (new), some 2" some 2 1/2"---$30.00 to $60.00 Many more not photoed.
Gas tanks (with and without return line nipples), filler neck assemblies, vented and non vented caps, many more not shown.
Some look as new, but even the ones with light surface (on outside only) are clean and sound.
1) Tanks---$75.00
2) filler neck assemblies--$50.00
3) caps) ---$10.00 to $50.00
Also have straps, original bolts, tank support brackets, and fuel door lids/assemblies (sorry no Original '68 only doors with emblem rivets in place).
Original tail light panels (have 4 or 5)---$225.00 per
'68 frame with rear trailing arm assemblies. Cowl back coupe body, nice windshield frame, rockers, up-rights. Rear fenders and tail light panel removed.
Straight frame, surface rust, (think this is a 4 speed frame, covered in my shipping boxes now)----Asking $2,000.00 with body, $1,500.00 without OBO. Also have nice set of '68 doors
Oil Pans---$50.00 to $250.00
Front and rear bumper brackets, extensions, etc. (not all shown)---$5.00 to $50.00 per
Front bumpers and bumpperettes----$100.00 to $400.00
Rear springs
1) 7 leaf from a '67 big block---$125.00
2) 9 leafs ---$75.00
Transmissions (look up my other ads for complete coding) $550.-- to $750.00
Early dated '68 (1967 dates for a '68 427) big block water pump, alternator and starter.
1)---SOLD--- water pump---$125.00---SOLD---have two more
2) alternator-----$200.00
3)---SOLD--- starter--------$200.00---SOLD
'69 original side pipe pieces and parts including good insulators, some pieces re-chromed)----$50.00 to $200.00 (not all pieces shown)
'69 to '75 steering wheels----$50.00 to $100.00 (not all shown).
Wiring harnesses, '68 and '69, a/c and non, all with good fiber optics and all complete.
1) engine----$50.00
2) front light w/optics---$125.00
3) '68 dash with a/c-----$200.00
4) '68 dash w/o a/c-----$175.00
5) '69 dash with a/c----$175.00
6) '69 dash w/o a/c-----$150.00
7) '68 and/or '69 rear lights with fiber optics---$100.00
Have mics harnesses---p/w, '68 rear interior lights with housings/lenses, clips, sockets, plugs, etc., etc.
More to come,
George
210 748 4693[IMG]resource://skype_ff_extension-at-jetpack/skype_ff_extension/data/call_skype_logo.png[/IMG]210 748 4693
geopar@gvtc.comCall
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype
#224
Instructor
Looking for original 69 BB fan shroud. No repairs. Part #3956119
Do you have one? If so, how much are you asking for it?
Please send pic. Mrh747@yahoo.com
Please advise
Thanks
Max
Do you have one? If so, how much are you asking for it?
Please send pic. Mrh747@yahoo.com
Please advise
Thanks
Max
#226
Instructor
69 vette fan shroud
There are a lot of really good guys on here that may be able to help.
Thanks
Max
#229
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,396
Received 6,256 Likes
on
3,903 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
I actually will be hitting him up for some 68 convertible rear quarter trim this winter if I can get the cash together
#230
Burning Brakes
#231
Drifting
I gave up even looking at his post due to multiple inquiries going unanswered. It's been a couple years now and I tried about 9 months or so ago, could be longer not sure but the result, no reply.
#233
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,396
Received 6,256 Likes
on
3,903 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
Private meassage him
#235
Dementer sole survivor
Member Since: Oct 2015
Location: YUPPY HELL Westford MASS
Posts: 16,396
Received 6,256 Likes
on
3,903 Posts
2020 C3 of the Year Finalist - Modified
2020 Corvette of the Year Finalist (performance mods)
2019 C3 of Year Winner (performance mods)
2016 C3 of Year Finalist
Wow. Sorry to hear that. Ive been following along on your conversion. Love the progress. Its gonna be beautiful when your done. Good luck on finding your parts
The following users liked this post:
Priya (08-28-2016)
#237
Instructor
Mufflers
In my ventures looking for radiator shroud, I have seen a couple of radiator supports frames. I will try to find them and send to you.
I am still trying to find and original shroud 3956119, if you come across one. the remanufactured ones are not a rigid as the originals, according to most guys on here. they require additional bracing.
good luck
max
Last edited by mrh747; 08-30-2016 at 02:23 PM.
#238
68 interior light
looking for one light that is on the inside of the 68 coupe that's located at the driver side and passenger side the interior lamp, need the metal housing and lens. You can e-mail a picture to austindc@bellsouth.net or reply please Thanks Don
#239
Burning Brakes
Any Rings left at this point? Looking for either below option below:
New in the box GM issue with clips rotated off of valve stem hole--$100.00 per or $350.00 for set of four (OBO)
Nice originals---(early design) --$125.00 per
New in the box GM issue with clips rotated off of valve stem hole--$100.00 per or $350.00 for set of four (OBO)
Nice originals---(early design) --$125.00 per