WTB: Dipstick for 68 427, Thanks!
#1
Melting Slicks
Thread Starter
WTB: Dipstick for 68 427, Thanks!
Hi, looking for a good used dipstick and tube for 68 427 engine. Stick will read from bottom to top: ADD/ /FULL ENGINE OIL E (The "E" is on its side). Typically it will have a pink or salmon color plastic tip. The handle will be round and slightly flattened. Let me know if one is floating around out there. Thanks!
#2
Le Mans Master
Hi, looking for a good used dipstick and tube for 68 427 engine. Stick will read from bottom to top: ADD/ /FULL ENGINE OIL E (The "E" is on its side). Typically it will have a pink or salmon color plastic tip. The handle will be round and slightly flattened. Let me know if one is floating around out there. Thanks!
I have one that I received from an NCRS member who had a 68 BB (400 Tri?).
It reads as you posted, but has an off white tip. Never could really ID what it was from.
#3
#4
Melting Slicks
Thread Starter
#5
I just checked my 68 L68, it's stamped as described with the off-white, almost tannish colored tip. What color is the handle supposed to be? Mine is silver, but it looks to be spray painted and there was some overspray on the white tip that scraped off with a razor blade.
#6
Melting Slicks
Thread Starter
Hi,
For the most part, the consensus is the tube was natural color and he handle was natural color. Both seemed to quickly change to rust color.
I just checked my 68 L68, it's stamped as described with the off-white, almost tannish colored tip. What color is the handle supposed to be? Mine is silver, but it looks to be spray painted and there was some overspray on the white tip that scraped off with a razor blade.
#7
#8
John
#9
Melting Slicks
Thread Starter
Hi again, ,
John,
Do you have a list of other 68 parts you are going to sell. Any luck on the drivers side dash pad? I am interested in the antana if it is in oK shape. Looking forward to seeing the dipstick.
Thanks, Terry
Do you have a list of other 68 parts you are going to sell. Any luck on the drivers side dash pad? I am interested in the antana if it is in oK shape. Looking forward to seeing the dipstick.
Thanks, Terry
#10
Safety Car
[. Looking forward to seeing the dipstick.
Thanks, Terry
[/QUOTE]
Rest assure, Terry.
Anything purchased from AJ is going to be exactly as described if not better. I purchased parts from John and never had any regrets. AJ is a top shelf seller and all around good guy.
Thanks, Terry
[/QUOTE]
Rest assure, Terry.
Anything purchased from AJ is going to be exactly as described if not better. I purchased parts from John and never had any regrets. AJ is a top shelf seller and all around good guy.
Last edited by bkvette3; 09-08-2015 at 07:24 AM.
#11
Melting Slicks
Thread Starter
I am sure it will….
I talked with him a little bit today. I am worse than a little kid around Christmas time.
Rest assure, Terry.
Anything purchased from AJ is going to be exactly as described if not better. I purchased parts from John and never had any regrets. AJ is a top shelf seller. [/QUOTE]
Rest assure, Terry.
Anything purchased from AJ is going to be exactly as described if not better. I purchased parts from John and never had any regrets. AJ is a top shelf seller. [/QUOTE]
#12
Melting Slicks
Terry,
Contact this guy for early C3 parts, indicate Joe Hudec pointed you his way.
VETTSTEVE@AOL.COM
Not sure he has a lot of BB stuff, but he is located in southern ca and has parted and still is parting early C3's 68's, 69's etc.
He may a few things you are looking for?
Joe
Contact this guy for early C3 parts, indicate Joe Hudec pointed you his way.
VETTSTEVE@AOL.COM
Not sure he has a lot of BB stuff, but he is located in southern ca and has parted and still is parting early C3's 68's, 69's etc.
He may a few things you are looking for?
Joe