CF postal service. Help moving parts
#101
Race Director
Member Since: Nov 2006
Location: Athens GA
Posts: 19,446
Received 351 Likes
on
304 Posts
St. Jude Donor '12-'13, '15- '16-'17-'18-'19, '21
Got a 350 small block in the shop right now getting reconditioned.
Have an interested buyer over in Arkansas.
Could use help to save him shipping costs.
Be ready in a couple of weeks.
Have another 2 bolt 350 SBC virgin bore #3970010 ready to go to shop after first one is done.
Think about that one too.
It is listed in my for sale thread regards 383 engine parts.
Dennis
Have an interested buyer over in Arkansas.
Could use help to save him shipping costs.
Be ready in a couple of weeks.
Have another 2 bolt 350 SBC virgin bore #3970010 ready to go to shop after first one is done.
Think about that one too.
It is listed in my for sale thread regards 383 engine parts.
Dennis
Anybody bound for Arkansas? Block ready this week???????
Can meet you part way.
Thanks
The following users liked this post:
AllC34Me (08-28-2018)
#103
Instructor
Shipping as transporting parts
there is a website called yesterday’s tractors. They have a hauling schedule that is just what your looking for. Bunch of guys into tractors and parts, much like us into corvettes and parts. They post if they are heading somewhere and have room in their truck or trailers. Lots of times they are just looking to cover their gas money. I’ve used it several times.
The following 2 users liked this post by council bay:
AllC34Me (09-21-2018),
bmans vette (10-21-2018)
#104
Old Pro Solo Guy
Anyone going to the MCACN show in Illinois on Nov 17 from the East Coast?
I found a set of rare snowflake heads for my LS6 that I would rather entrust to a fellow member than UPS.
Any space on a trailer coming back East?
TIA
I'm in Marlton, NJ
Leigh
I found a set of rare snowflake heads for my LS6 that I would rather entrust to a fellow member than UPS.
Any space on a trailer coming back East?
TIA
I'm in Marlton, NJ
Leigh
#105
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Updated posting below.
Last edited by AllC34Me; 11-05-2018 at 03:13 PM.
#106
Race Director
Member Since: Nov 2006
Location: Athens GA
Posts: 19,446
Received 351 Likes
on
304 Posts
St. Jude Donor '12-'13, '15- '16-'17-'18-'19, '21
I will be flying to Maui, Hawaii in the next week. If anyone on the Islands of Hawaii need a mule to carry a part, small parts, something for your Corvette that you don't want to pay those high shipping costs, this might be your opportunity for a free ride to the islands.
Just a couple of rules:
1) You have to be get it to me in Easton, PA 18045 by Thanksgiving Day.
2) It has to be able to safely travel in my checked baggage.
3) It cannot be a flammable, or hazardous material to travel on an aircraft.
If I can help out let me know.
Best regards,
David
Just a couple of rules:
1) You have to be get it to me in Easton, PA 18045 by Thanksgiving Day.
2) It has to be able to safely travel in my checked baggage.
3) It cannot be a flammable, or hazardous material to travel on an aircraft.
If I can help out let me know.
Best regards,
David
Can I come?
Have a great trip David. Happy Thanksgiving to you and Tammy!
From Dennis and Bobbi
The following users liked this post:
AllC34Me (11-20-2018)
#107
Le Mans Master
#108
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Gentlemen and ladies, Thorpe has posted a need to get a 1969 frame moved from Warminster, PA (North of Philadelphia) to central North Carolina. It is posted in the C-3 general section. If anyone can help him out please let him know. I have moved a bunch of items on that route and it’s a nice run. Thanks and best regards, David
The following users liked this post:
Thorpe (03-20-2019)
#109
Old Pro Solo Guy
Space available: NYC to NJ to Carlilse, PA
If I can help anyone out, I'll be heading to Long Island, NY this weekend and then to Spring Carlilse, Pa in a couple weeks.
Could take my car, pickup or minivan, and will be almost empty.
Lee
If I can help anyone out, I'll be heading to Long Island, NY this weekend and then to Spring Carlilse, Pa in a couple weeks.
Could take my car, pickup or minivan, and will be almost empty.
Lee
The following users liked this post:
AllC34Me (08-20-2019)
#110
Le Mans Master
Thread Starter
I have a P/U and trailer headed from Phx to Idaho(St Anthony) On the 22nd returning the following week.
If anyone needs something moved drop me a line
Phil 480 2137616
If anyone needs something moved drop me a line
Phil 480 2137616
The following users liked this post:
AllC34Me (08-20-2019)
#111
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I have my empty pickup and open car hauler heading from the Richmond, VA area back up to the Easton, PA area this weekend, August 31st.
If you have something South, heading North, I may be able to help you get it heading in the right direction.
Late notice I know, but if I can help let me know as soon as possible.
Best regards,
David Howard
AllVettes4Me
If you have something South, heading North, I may be able to help you get it heading in the right direction.
Late notice I know, but if I can help let me know as soon as possible.
Best regards,
David Howard
AllVettes4Me
#112
Red Road Warrior
Member Since: Dec 2000
Location: Lansdale 19446 PA
Posts: 3,341
Received 282 Likes
on
199 Posts
St. Jude Donor '10-'11, '15, '19
Is there anyone from the North East heading south passing north of Philly and going near/thru Ft Bragg, North Carolina? I have some 1978 rear window trim for CF member ARMYcorvette.We have a very small window but I figure it was worth a try. Reply here or send me a PM if you can help out
John
John
The following users liked this post:
ARMYcorvette (11-19-2019)
#113
I like the idea and actually was going to suggest is as well. I think it would be reasonable to have the ability to buy shipping through the 3 major venders. Maybe discounted ; )
Package the item, weight it, provided dimensions and purchase a shipping label. Drop the package off at the shipping counter. Similar to how its done on Ebay.
Be great!
Package the item, weight it, provided dimensions and purchase a shipping label. Drop the package off at the shipping counter. Similar to how its done on Ebay.
Be great!
Last edited by tfringo; 06-23-2020 at 10:34 AM.
#114
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Have truck and trailer, have space, heading from Easton, PA to Carlisle, PA for the Corvettes at Carlisle show August 26th (set up day), 27th, 28th, and 29th. I am not selling items at the show but I am picking items up, and dropping items off, to buyers and from sellers at the show. If you need something, say something please.
Let me know if I can help.
AllVettes4Me
David Howard
Let me know if I can help.
AllVettes4Me
David Howard
The following users liked this post:
BlackKnight (08-27-2020)
#115
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I just wanted to take this time to thank the men and women that move products around the Country for us during this rough and tumble year.
Though many have stayed home or near their homes, I live near Interstate Highways I-78; I-80; and I-81 and have been on each of them lately.
The trucking industry is up and running and keeping products moving and I for one am very appreciative of their efforts.
Stay well, stay safe, see you in 2021.
David Howard
AllVettes4Me
Though many have stayed home or near their homes, I live near Interstate Highways I-78; I-80; and I-81 and have been on each of them lately.
The trucking industry is up and running and keeping products moving and I for one am very appreciative of their efforts.
Stay well, stay safe, see you in 2021.
David Howard
AllVettes4Me
The following users liked this post:
marshal135 (01-13-2021)
#116
Instructor
I'm bringing my son back to school in Orono, Maine on the 20th of January and will be returning (heading south) with an empty pickup truck along the I-95 corridor midday after the drop off. The truck will be mostly full of his school stuff heading north on the 19th but I can probably move something as large as a differential on the northern run to school. If it helps someone move parts along/ partway along, let me know. I can store them in Brookline, NH while you coordinate the next step south.
Mike
Mike
Last edited by ACfarmerNH; 01-10-2021 at 03:05 PM.
#117
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I'm bringing my son back to school in Orono, Maine on the 20th of January and will be returning (heading south) with an empty pickup truck along the I-95 corridor midday after the drop off. The truck will be mostly full of his school stuff heading north on the 19th but I can probably move something as large as a differential on the northern run to school. If it helps someone move parts along/ partway along, let me know. I can store them in Brookline, NH while you coordinate the next step south.
Mike
Mike
Best regards,
David
#119
Instructor
Work has me heading up to Cutler, Maine on April 11th and returning home on the 21st. Travel up will be from Brookline, NH along 101 to 95 to the Bangor/Orono area (planning to stop in and have lunch with my son up at UMaine) and then heading east along Route 9. The return trip will be down Rt 1 towards Bar Harbor and then back along the 95/101 corridors. Have about 1/2-3/4 of a pickup truck bed available. Let me know if I can help move something along for you.
Mike
Mike
The following users liked this post:
AllC34Me (04-10-2021)
#120
Instructor
I'll be spending a considerable amount of time in Cutler, Maine this summer from July through October. The plan is to head home (south central NH) every other weekend and spend the odd weekend in the Orono/ Old Town, Maine area. I'll have a mostly empty pickup available for each run along the I-95/Rt 101 corridors if I can help you move a part along.
Mike
Mike
The following users liked this post:
AllC34Me (06-20-2021)