jhudec

The shop lost my front bumper brackets ***ARGH***
I need the following
furthest ext bracket 3922077/3922078 LH/RH
ext bracket 3958795/3958796 LH/RH
9419101 bolts 1/2" x 1 1/2" ,need 4, Head marks M or RSC or C etc
serrated washers, lock washers and nuts, need 4 of each

I know I can get some off of ebay, but I thought I would try here first.
Thanks guys.............
Send price and pics to jhudec2001@yahoo.com
Joe

72ls5fla

Joe -

let me check for you.
think I have the L/R long extensions and the bolts/washers

bill

jhudec

Thank you
The part numbers are stamped into the long brackets.
Joe

72ls5fla

here is what i have found so far....

I have both the 795/796 extensions.
they are in very nice shape. no bends, bad rust etc...
were bead blasted at one point, but now have some flash rust, but thats all.
I can get pics for you tomorrow.

I have the bolts, nuts, lock washers - but no serrated washers
some of head markings are not clearly visible. the bolts need a good cleaning etc...

all these parts came off of a 69 parts car.

$150 + shipping for all pieces.

Bill

jhudec

Still looking what is out there.

jhudec

Nobody?
TTT

Corbis

I have a 69 that my dad bought in 1981. We did an on-frame restoration and discovered it had a 1970-73 nose (side vent sections were cut and glassed in). So while rebuilding the front end now in 2021, I went crazy trying to find these braces only to discover that for 37 plus years these front bumper braces have not been on the car (bumper bolted directly to body. I ordered new '69 braces and they appear to be about 2 inches too long. I see in the first photo that the second set of braces appear to be shorter than the rest, or maybe I need the last pair (to right).

Does anyone have the means to measure the versions to see which ones I need to (re) order? Thanks.

ralphspears

Post a picture of what you have for brackets

69L88

This thread is nearly 5 years old. You should start a new one.