Notices
C3 Parts for Sale/Wanted C3 Corvette Performance Parts, Rare NOS and NLA Chevy Parts, Wheels & Tires, Exterior Enhancements, Aftermarket
Sponsored by:
Sponsored by:

F/S: 1968 - 1976 Parts

Thread Tools
 
Search this Thread
 
Old 09-28-2016, 08:57 PM
  #1  
72ls5fla
Drifting
Thread Starter
 
72ls5fla's Avatar
 
Member Since: Aug 2003
Location: Fl
Posts: 1,321
Received 11 Likes on 8 Posts

Default F/S: 1968 - 1976 Parts

1968 Dash driver assembly
speedo and 5800/6000 red line tach.
tach/speedo worked in car. light switch worked, wiper door relay worked. dash pad fair shape. has some cracks on the rear side, but can be glued/set. dash pad will attach and be okay.
gauge lenses need polishing, and bezels need cleaning and paint.
Dark Blue
*** speedo and tach will work in 69 also *****
$400

T-top car rear pop-out window Glass and
Frame assembly. Dated
$200

68-76 spare tire container bottom
$200

68-76 spare tire upper plastic piece
$50

68-69 vacuum canister. Original from the car, no leaks.
$125

1968/69 am/fm radio. ok bezel - needs cleaning up
All buttons work. Have not tested power-up. More a core for restoration.
$125

2 - 68 only wiper motors. One motor worked (with cover), other is for parts.
$200 set

#284 427 water pump dated 1965. Excellent core, should be rebuilt. but it turns freely and did not leak. rare date code, would have been used on a 1965 396/425 HP engine.
$100

Switzer fan clutch from a 1972 454 car.
dated 4/1/1972
works 100%, no leaky seals and engages fully
$250



1969 427 Harrison radiator End Tanks
DVR will work 4spd or auto
PASS is for a automatic car.
these are in nice shape best I can tell
$100.00 pair

Rally wheel center caps
Very nice shape - original.
Take-0ffs from a 35K mile car
$150 for set

Late 1969 - 1973 Coupe NOS DVR side door Weather Strip
$150

1969 - 1972 T-Top Interior Trim Panels
L/R side - Very good shape
no cracks and backside has all velcro stick points.
DVR side is saddle the PASS black
$100 each


Misc lenses and bezels (maker lights, front turn signal, rear rail lenses)
Misc bolts etc.
Misc rear number to frame brackets


1968 parking brake assembly. great core for restoration. used in 1967 and 1968 only.
$50

Stainless (all OEM take offs)
2 sets of a-pilar reveal.
$125 ea set

2 sets of a-pilar ws chanels
$50 ea set

68/69 rear halo set
$70 ea set

68-76 center t-top (zero bends, screw holes not collapsed)
$125

68-76 upper windshield
$75

**** all stainless is in super good condition. nothing bent and gouged. needs polishing and cleaning.
Buyer must pay all shipping and packaging costs. I take parts the UPS store. They handle the boxing etc....

If there are questions you can reach me through email:
bill.chamberlain@onetechplace.com

-or-
cell: 850-567-2994

Will send pictures on request.


Thanks
Bill

Last edited by 72ls5fla; 02-12-2017 at 10:15 AM.
Old 09-28-2016, 09:21 PM
  #2  
restoman1
Burning Brakes
 
restoman1's Avatar
 
Member Since: Dec 2010
Location: CA
Posts: 825
Likes: 0
Received 57 Likes on 45 Posts

Default

Rear defroster blower motor , wire harness and lower front switch and panel (these all worked in the car)
$125
I may be interested in the defogger stuff. Can you tell me the date stamped on the motor please? Also, is the switch the toggle switch or the rotary?

Thanks
Ed
Old 09-28-2016, 09:26 PM
  #3  
72ls5fla
Drifting
Thread Starter
 
72ls5fla's Avatar
 
Member Since: Aug 2003
Location: Fl
Posts: 1,321
Received 11 Likes on 8 Posts

Default

Originally Posted by restoman1
I may be interested in the defogger stuff. Can you tell me the date stamped on the motor please? Also, is the switch the toggle switch or the rotary?

Thanks
Ed
Ed,

I will look at the shop tomorrow.
do you happen to know where the date stamp is on the motor?
and I am pretty sure the switch is not toggle.

pretty sure its a 68/69 motor.

Bill

Last edited by 72ls5fla; 09-28-2016 at 09:27 PM.
Old 09-28-2016, 09:34 PM
  #4  
restoman1
Burning Brakes
 
restoman1's Avatar
 
Member Since: Dec 2010
Location: CA
Posts: 825
Likes: 0
Received 57 Likes on 45 Posts

Default

Thanks Bill. Yes, the date will be stamped on the end of the motor like the one below (dated 3 69 - March, 1969)

By the way, I got your email with the pictures.

Thanks
Ed
Attached Images  

Last edited by restoman1; 09-28-2016 at 09:37 PM.
Old 09-28-2016, 09:38 PM
  #5  
69vette19467
Racer
 
69vette19467's Avatar
 
Member Since: Jun 2008
Location: Macon Georgia
Posts: 270
Received 10 Likes on 10 Posts

Default

I'm assuming the radio is mono?
Old 09-28-2016, 09:45 PM
  #6  
72ls5fla
Drifting
Thread Starter
 
72ls5fla's Avatar
 
Member Since: Aug 2003
Location: Fl
Posts: 1,321
Received 11 Likes on 8 Posts

Default

Originally Posted by 69vette19467
I'm assuming the radio is mono?
yes
am/fm but not stereo.

bill
Old 09-29-2016, 09:16 PM
  #7  
mooncricket
Pro
 
mooncricket's Avatar
 
Member Since: Jul 2001
Posts: 595
Received 9 Likes on 8 Posts

Default

1968/69 am/fm radio. ok bezel - needs cleaning up
All buttons work. Have not tested power-up. More a core for restoration.
$125


Can you provide pictures of the radio including the tags and a good close up of the face?

thx
Old 09-29-2016, 09:21 PM
  #8  
72ls5fla
Drifting
Thread Starter
 
72ls5fla's Avatar
 
Member Since: Aug 2003
Location: Fl
Posts: 1,321
Received 11 Likes on 8 Posts

Default

Originally Posted by mooncricket
1968/69 am/fm radio. ok bezel - needs cleaning up
All buttons work. Have not tested power-up. More a core for restoration.
$125


Can you provide pictures of the radio including the tags and a good close up of the face?

thx
email address?
I will take pictures tomorrow and send them to you.

Bill
Old 09-30-2016, 03:11 AM
  #9  
Bigeddie
Burning Brakes
 
Bigeddie's Avatar
 
Member Since: Jun 2013
Location: salinas CA
Posts: 796
Received 26 Likes on 20 Posts

Default

if you can get me shipping price for the pop out window and frame? does this including everything that will be needed to replace or install? zip 93905
Old 09-30-2016, 07:51 AM
  #10  
72ls5fla
Drifting
Thread Starter
 
72ls5fla's Avatar
 
Member Since: Aug 2003
Location: Fl
Posts: 1,321
Received 11 Likes on 8 Posts

Default

Originally Posted by Bigeddie
if you can get me shipping price for the pop out window and frame? does this including everything that will be needed to replace or install? zip 93905
It is just the frame and glass assembly.
No other hardware.

I will take it to the UPS store later today and get a packaging/shipping quote. If I had to guess its going to be at least $25-$30 to package/ship.

Bill
Old 09-30-2016, 02:10 PM
  #11  
540 vette
Race Director
 
540 vette's Avatar
 
Member Since: Jan 2002
Location: No Where USA
Posts: 11,125
Received 298 Likes on 212 Posts

Default

1968 only 4 speed clutch/brake pedal assembly
With clutch bar rod (will work on all C3 years too)
$200


This is for the whole setup including the dash mounting bracket. Get shipping to 11725 please. can you post a picture please.

Last edited by 540 vette; 09-30-2016 at 02:12 PM.
Old 09-30-2016, 08:11 PM
  #12  
72ls5fla
Drifting
Thread Starter
 
72ls5fla's Avatar
 
Member Since: Aug 2003
Location: Fl
Posts: 1,321
Received 11 Likes on 8 Posts

Default

send me you email address and I will send over pictures.

it is all the brackets, pedals, etc ... basically took the entire unit out from the car.

If you are interested, thenI will take the assembly next week to the UPS store to get a packaging/shipping price.

Bill
Old 10-12-2016, 09:14 PM
  #13  
72ls5fla
Drifting
Thread Starter
 
72ls5fla's Avatar
 
Member Since: Aug 2003
Location: Fl
Posts: 1,321
Received 11 Likes on 8 Posts

Default

ttt
Old 01-15-2017, 10:05 AM
  #14  
68_twister
Cruising
 
68_twister's Avatar
 
Member Since: Jan 2017
Location: Michigan
Posts: 11
Received 0 Likes on 0 Posts
Default

Do you still have the clutch/brake pedal assembly?

thx,
david
Old 01-15-2017, 12:02 PM
  #15  
72ls5fla
Drifting
Thread Starter
 
72ls5fla's Avatar
 
Member Since: Aug 2003
Location: Fl
Posts: 1,321
Received 11 Likes on 8 Posts

Default

Originally Posted by 68_twister
Do you still have the clutch/brake pedal assembly?

thx,
david

yes
still available.

send email address for pictures..

thanks
bill
Old 01-26-2017, 10:54 AM
  #16  
Andy Tuttle
Melting Slicks
 
Andy Tuttle's Avatar
 
Member Since: Aug 2010
Location: Bussey IA
Posts: 2,059
Received 392 Likes on 340 Posts

Default

Do you still have the upper plastic spare tire piece for 50? Shipping to 50044?
Old 01-28-2017, 09:37 PM
  #17  
Bruce42
Pro
Support Corvetteforum!
 
Bruce42's Avatar
 
Member Since: Mar 2011
Location: Montreal Quebec
Posts: 579
Received 5 Likes on 5 Posts

Default

any more 68 parts
Old 03-23-2017, 11:00 PM
  #18  
vetternr
Instructor
 
vetternr's Avatar
 
Member Since: Dec 2011
Posts: 129
Likes: 0
Received 0 Likes on 0 Posts

Default Power Brake Booster and master Cylinder

Originally Posted by 72ls5fla
1968 Dash driver assembly
speedo and 5800/6000 red line tach.
tach/speedo worked in car. light switch worked, wiper door relay worked. dash pad fair shape. has some cracks on the rear side, but can be glued/set. dash pad will attach and be okay.
gauge lenses need polishing, and bezels need cleaning and paint.
Dark Blue
*** speedo and tach will work in 69 also *****
$400

T-top car rear pop-out window Glass and
Frame assembly. Dated
$200

68-76 spare tire container bottom
$200

68-76 spare tire upper plastic piece
$50

68-69 vacuum canister. Original from the car, no leaks.
$125

1968/69 am/fm radio. ok bezel - needs cleaning up
All buttons work. Have not tested power-up. More a core for restoration.
$125

2 - 68 only wiper motors. One motor worked (with cover), other is for parts.
$200 set

#284 427 water pump dated 1965. Excellent core, should be rebuilt. but it turns freely and did not leak. rare date code, would have been used on a 1965 396/425 HP engine.
$100

Switzer fan clutch from a 1972 454 car.
dated 4/1/1972
works 100%, no leaky seals and engages fully
$250



1969 427 Harrison radiator End Tanks
DVR will work 4spd or auto
PASS is for a automatic car.
these are in nice shape best I can tell
$100.00 pair

Rally wheel center caps
Very nice shape - original.
Take-0ffs from a 35K mile car
$150 for set

Late 1969 - 1973 Coupe NOS DVR side door Weather Strip
$150

1969 - 1972 T-Top Interior Trim Panels
L/R side - Very good shape
no cracks and backside has all velcro stick points.
DVR side is saddle the PASS black
$100 each


Misc lenses and bezels (maker lights, front turn signal, rear rail lenses)
Misc bolts etc.
Misc rear number to frame brackets


1968 parking brake assembly. great core for restoration. used in 1967 and 1968 only.
$50

Stainless (all OEM take offs)
2 sets of a-pilar reveal.
$125 ea set

2 sets of a-pilar ws chanels
$50 ea set

68/69 rear halo set
$70 ea set

68-76 center t-top (zero bends, screw holes not collapsed)
$125

68-76 upper windshield
$75

**** all stainless is in super good condition. nothing bent and gouged. needs polishing and cleaning.
Buyer must pay all shipping and packaging costs. I take parts the UPS store. They handle the boxing etc....

If there are questions you can reach me through email:
bill.chamberlain@onetechplace.com

-or-
cell: 850-567-2994

Will send pictures on request.


Thanks
Bill

Do you have the Power Brake Booster and master Cylinder ????

Get notified of new replies

To F/S: 1968 - 1976 Parts




Quick Reply: F/S: 1968 - 1976 Parts



All times are GMT -4. The time now is 09:14 PM.