FS: 1972 350/270 Engine Casting - Ready to Restore
#1
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
1972 350/270 Engine Casting - Ready to Restore
Decided not to rebuild it, so will sell it to the first person that shows up with $75 cash.
It is in good shape, no cracks, to damage, clean cylinder walls, was going to bore it .030" to give it some gumption, but my gumption is gone. I also have a forged crank that would work well with it, $50 for it cash is you want it. The crank came out of a 1968 327/350 engine block. (Lousy pictures, nice block).
VIN is still intact on the block, nothing has been machined on it.
It is currently resting on my engine stand. You buy the casting and the crank for $125 and you can have the stand too.
First come, first served.
Come and get it.
David Howard
AllVettes4Me
It is in good shape, no cracks, to damage, clean cylinder walls, was going to bore it .030" to give it some gumption, but my gumption is gone. I also have a forged crank that would work well with it, $50 for it cash is you want it. The crank came out of a 1968 327/350 engine block. (Lousy pictures, nice block).
VIN is still intact on the block, nothing has been machined on it.
It is currently resting on my engine stand. You buy the casting and the crank for $125 and you can have the stand too.
First come, first served.
Come and get it.
David Howard
AllVettes4Me
#2
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Might have been nice to show the whole thing.
Cam is gone. Original cast crank is gone. Pistons are all gone. Start from the casting and work your magic.
Let me know.
David
Cam is gone. Original cast crank is gone. Pistons are all gone. Start from the casting and work your magic.
Let me know.
David
#5
Race Director
Member Since: Nov 2006
Location: Athens GA
Posts: 19,446
Received 351 Likes
on
304 Posts
St. Jude Donor '12-'13, '15- '16-'17-'18-'19, '21
Hi David,
Is this the block you needed the oil pan for?
I just sent that up with Bill yesterday.
If you don't need it, I'll buy the block and you can send it back with Bill or I'll get it when I come to Carlisle. Pay you now of course.
The block looks like it is a 3970010
PM or post your answer here.
Txs David.
Cannot wait to see Racer done.
Got both my frames on a separate dolly now.
Time to get on them.
Dennis
Is this the block you needed the oil pan for?
I just sent that up with Bill yesterday.
If you don't need it, I'll buy the block and you can send it back with Bill or I'll get it when I come to Carlisle. Pay you now of course.
The block looks like it is a 3970010
PM or post your answer here.
Txs David.
Cannot wait to see Racer done.
Got both my frames on a separate dolly now.
Time to get on them.
Dennis
#7
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Thank you sir.
David
David
The following users liked this post:
bmans vette (04-15-2017)
#8
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Engine block is sold now. Thank you.
The following users liked this post:
bmans vette (04-15-2017)