FS: Performance Parts new or near new
04-27-2017, 11:30 PM
#1
Instructor
Thread Starter
Performance Parts new or near new
Hey Guys, recently bought a 94 6 speed, so not going to finish my project with my 86. I put the FAST EZ 2.0 retro and all of the required parts to make it work, AFR 195 street elims, MiniRam 1205, TPIS headers, Corsa Exhaust and drove it about 200 miles when I decided to tear it back down and throw in a bigger cam. So, most of the parts new or have about 200 miles on them.
Fast EZ 2.0 - $900 - SOLD
FAST Dual Sync Distributor - $250 - SOLD
MSD 6AL - $150 - SOLD
MSD Blaster coil - $30 - SOLD
Map Sensor - $15 - SOLD
Throttle position sensor - $15 - SOLD
New in Box - 255l/hr fuel pump with installation kit - $80 - SOLD
New in box B&M Lock up controller for 700R4 - $150 - SOLD.
TPIS Air pump delete kit - $125 - SOLD
Original computer with custom tune for 383, I didn't do the tune, but can ran well when I purchased it. - $40 - SOLD
MiniRam1205 and fuel rail kit - $900 - SOLD
Bosch 3 36lb injectors - $300 - SOLD
58 MM Throttle body - $200
Stock 48 mm throttle body $40
AFR 195 street eliminators 65cc - $1250 - SOLD
TPIS long tube headers with Y pipe - $650 - SOLD
Cam, lifters, pushrods, timing chain are all new, installed but never ran. - SOLD
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250 - SOLD
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325 - SOLD
Lunati sportsman pushrods 7.3 - $80 - SOLD
Cloyes 2 piece Aluminum timing cover - $100 - SOLD
Lunati sportsman timing set with torrington bearing - $35 - SOLD
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125 - SOLD
Comp Cams pushrods hardened 5/16 CCA-7608-16 (from flat tappet cam) - $60
Champion 3 core radiator w/ aluminum shroud and dual spal fans -******Price drop - $350
Alternator (less than 500 miles on it) - $75
Water pump (less than 200 miles) - $25 - SOLD
New lower radiator hose - $10 - SOLD
AC Compressor - $100 - SOLD
AC Condensor - $******Price drop - $100
New in box complete coupe mass back carpet set Black - ******Price drop - $375
ZR-1 Replicas for early C4 with 275 front and 315 Nitto NT555 extereme tires - about 2,000 miles on the tries (Local Only to PHoenix metro - would be trade for anything that will fit and $500) - SOLD
Fast EZ 2.0 - $900 - SOLD
FAST Dual Sync Distributor - $250 - SOLD
MSD 6AL - $150 - SOLD
MSD Blaster coil - $30 - SOLD
Map Sensor - $15 - SOLD
Throttle position sensor - $15 - SOLD
New in Box - 255l/hr fuel pump with installation kit - $80 - SOLD
New in box B&M Lock up controller for 700R4 - $150 - SOLD.
TPIS Air pump delete kit - $125 - SOLD
Original computer with custom tune for 383, I didn't do the tune, but can ran well when I purchased it. - $40 - SOLD
MiniRam1205 and fuel rail kit - $900 - SOLD
Bosch 3 36lb injectors - $300 - SOLD
58 MM Throttle body - $200
Stock 48 mm throttle body $40
AFR 195 street eliminators 65cc - $1250 - SOLD
TPIS long tube headers with Y pipe - $650 - SOLD
Cam, lifters, pushrods, timing chain are all new, installed but never ran. - SOLD
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250 - SOLD
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325 - SOLD
Lunati sportsman pushrods 7.3 - $80 - SOLD
Cloyes 2 piece Aluminum timing cover - $100 - SOLD
Lunati sportsman timing set with torrington bearing - $35 - SOLD
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125 - SOLD
Comp Cams pushrods hardened 5/16 CCA-7608-16 (from flat tappet cam) - $60
Champion 3 core radiator w/ aluminum shroud and dual spal fans -******Price drop - $350
Alternator (less than 500 miles on it) - $75
Water pump (less than 200 miles) - $25 - SOLD
New lower radiator hose - $10 - SOLD
AC Compressor - $100 - SOLD
AC Condensor - $******Price drop - $100
New in box complete coupe mass back carpet set Black - ******Price drop - $375
ZR-1 Replicas for early C4 with 275 front and 315 Nitto NT555 extereme tires - about 2,000 miles on the tries (Local Only to PHoenix metro - would be trade for anything that will fit and $500) - SOLD
Last edited by azanardifan; 06-26-2017 at 01:47 PM.
04-28-2017, 12:38 AM
#2
Advanced
From Cam68 RE: EZ EFI 2.0 and distributor
I sent you a PM just a minute ago.Thanks!
Cam 68
Cam 68
Hey Guys, recently bought a 94 6 speed, so not going to finish my project with my 86. A lot of the parts would work well in a C3, so please let me know if you are interested in any of the below parts.
Most of the parts new or have about 200 miles on them.
Fast EZ 2.0 - $900
FAST Dual Sync Distributor - $250
MSD 6AL - $150
MSD Blaster coil - $30
Map Sensor - $15
Throttle position sensor - $15
New in box B&M Lock up controller for 700R4 - $150
TPIS Air pump delete kit - $125
Original computer with custom tune for 383, I didn't do the tune, but can ran well when I purchased it. - $40
MiniRam1205 and fuel rail kit - $900
Bosch 3 36lb injectors - $300
58 MM Throttle body - $200
Stock 48 mm throttle body $40
AFR 195 street eliminators 65cc - $1250
TPIS long tube headers with Y pipe - $650
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
Comp Cams pushrods hardened 5/16 CCA-7608-16 (from flat tappet cam) - $60
Champion 3 core radiator w/ aluminum shroud and dual spal fans - $400
Alternator (less than 500 miles on it) - $75
Water pump (less than 200 miles) - $25
New lower radiator hose - $10
AC Compressor - $100
New in box complete coupe mass back carpet set Black - $450
ZR-1 Replicas for early C4 with 275 front and 315 Nitto NT555 extereme tires - about 2,000 miles on the tries (Local Only to PHoenix metro - would be trade for anything that will fit and $500)
Also have a lot of other original parts, car is an 86. Let me know if there is anything that you need. The engine is a 2-bolt 383, less than 20,000 miles per the previous owner, very clean inside. 700R4 was rebuilt and has a 2400 stall B&M Holeshot converter. Willing to sell entire car for a decent price.
Most of the parts new or have about 200 miles on them.
Fast EZ 2.0 - $900
FAST Dual Sync Distributor - $250
MSD 6AL - $150
MSD Blaster coil - $30
Map Sensor - $15
Throttle position sensor - $15
New in box B&M Lock up controller for 700R4 - $150
TPIS Air pump delete kit - $125
Original computer with custom tune for 383, I didn't do the tune, but can ran well when I purchased it. - $40
MiniRam1205 and fuel rail kit - $900
Bosch 3 36lb injectors - $300
58 MM Throttle body - $200
Stock 48 mm throttle body $40
AFR 195 street eliminators 65cc - $1250
TPIS long tube headers with Y pipe - $650
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
Comp Cams pushrods hardened 5/16 CCA-7608-16 (from flat tappet cam) - $60
Champion 3 core radiator w/ aluminum shroud and dual spal fans - $400
Alternator (less than 500 miles on it) - $75
Water pump (less than 200 miles) - $25
New lower radiator hose - $10
AC Compressor - $100
New in box complete coupe mass back carpet set Black - $450
ZR-1 Replicas for early C4 with 275 front and 315 Nitto NT555 extereme tires - about 2,000 miles on the tries (Local Only to PHoenix metro - would be trade for anything that will fit and $500)
Also have a lot of other original parts, car is an 86. Let me know if there is anything that you need. The engine is a 2-bolt 383, less than 20,000 miles per the previous owner, very clean inside. 700R4 was rebuilt and has a 2400 stall B&M Holeshot converter. Willing to sell entire car for a decent price.
05-01-2017, 01:59 PM
#7
Instructor
Thread Starter
They are 65 CC, angled plugs. They will handle roller just fine, spring set up will handle up to 600 lift. About 200 miles on them, I pull them and get some pics tonight. They are AFR part number 1040.
05-01-2017, 02:00 PM
#8
Are the heads new, bare?
Were you going to use all of this stuff with the heads......
Cam, lifters, pushrods, timing chain are all new, installed but never ran.
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
package price?
Were you going to use all of this stuff with the heads......
Cam, lifters, pushrods, timing chain are all new, installed but never ran.
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
package price?
Last edited by Chicago Bob; 05-01-2017 at 02:01 PM.
05-01-2017, 04:27 PM
#9
Instructor
Thread Starter
Are the heads new, bare?
Were you going to use all of this stuff with the heads......
Cam, lifters, pushrods, timing chain are all new, installed but never ran.
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
package price?
Were you going to use all of this stuff with the heads......
Cam, lifters, pushrods, timing chain are all new, installed but never ran.
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
package price?
Last edited by azanardifan; 05-01-2017 at 04:34 PM.
05-02-2017, 12:35 PM
#10
Instructor
Thread Starter
06-17-2017, 03:12 PM
#13
Advanced
Fast EZ 2.0
I remember speaking with you a couple of months ago, but I cannot remember what the EZ 2.0 fit. I am running an SBC with square bore manifold and conventional distributor. Will this work with my application? If so can you post pictures of what you have? Is this the complete EFI System? or just part?
Thanks,
David
Thanks,
David
Hey Guys, recently bought a 94 6 speed, so not going to finish my project with my 86. A lot of the parts would work well in a C3, so please let me know if you are interested in any of the below parts.
Most of the parts new or have about 200 miles on them.
Fast EZ 2.0 - $900
FAST Dual Sync Distributor - $250
MSD 6AL - $150
MSD Blaster coil - $30
Map Sensor - $15
Throttle position sensor - $15
New in box B&M Lock up controller for 700R4 - $150 - SOLD.
TPIS Air pump delete kit - $125 - SOLD
Original computer with custom tune for 383, I didn't do the tune, but can ran well when I purchased it. - $40 - SOLD
MiniRam1205 and fuel rail kit - $900 - SOLD
Bosch 3 36lb injectors - $300
58 MM Throttle body - $200
Stock 48 mm throttle body $40
AFR 195 street eliminators 65cc - $1250
TPIS long tube headers with Y pipe - $650 - SOLD
Cam, lifters, pushrods, timing chain are all new, installed but never ran.
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
Comp Cams pushrods hardened 5/16 CCA-7608-16 (from flat tappet cam) - $60
Champion 3 core radiator w/ aluminum shroud and dual spal fans - $400
Alternator (less than 500 miles on it) - $75
Water pump (less than 200 miles) - $25
New lower radiator hose - $10
AC Compressor - $100
New in box complete coupe mass back carpet set Black - $450
ZR-1 Replicas for early C4 with 275 front and 315 Nitto NT555 extereme tires - about 2,000 miles on the tries (Local Only to PHoenix metro - would be trade for anything that will fit and $500)
Also have a lot of other original parts, car is an 86. Let me know if there is anything that you need. The engine is a 2-bolt 383, less than 20,000 miles per the previous owner, very clean inside. 700R4 was rebuilt and has a 2400 stall B&M Holeshot converter. Willing to sell entire car for a decent price.
Most of the parts new or have about 200 miles on them.
Fast EZ 2.0 - $900
FAST Dual Sync Distributor - $250
MSD 6AL - $150
MSD Blaster coil - $30
Map Sensor - $15
Throttle position sensor - $15
New in box B&M Lock up controller for 700R4 - $150 - SOLD.
TPIS Air pump delete kit - $125 - SOLD
Original computer with custom tune for 383, I didn't do the tune, but can ran well when I purchased it. - $40 - SOLD
MiniRam1205 and fuel rail kit - $900 - SOLD
Bosch 3 36lb injectors - $300
58 MM Throttle body - $200
Stock 48 mm throttle body $40
AFR 195 street eliminators 65cc - $1250
TPIS long tube headers with Y pipe - $650 - SOLD
Cam, lifters, pushrods, timing chain are all new, installed but never ran.
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
Comp Cams pushrods hardened 5/16 CCA-7608-16 (from flat tappet cam) - $60
Champion 3 core radiator w/ aluminum shroud and dual spal fans - $400
Alternator (less than 500 miles on it) - $75
Water pump (less than 200 miles) - $25
New lower radiator hose - $10
AC Compressor - $100
New in box complete coupe mass back carpet set Black - $450
ZR-1 Replicas for early C4 with 275 front and 315 Nitto NT555 extereme tires - about 2,000 miles on the tries (Local Only to PHoenix metro - would be trade for anything that will fit and $500)
Also have a lot of other original parts, car is an 86. Let me know if there is anything that you need. The engine is a 2-bolt 383, less than 20,000 miles per the previous owner, very clean inside. 700R4 was rebuilt and has a 2400 stall B&M Holeshot converter. Willing to sell entire car for a decent price.
06-17-2017, 06:59 PM
#14
Racer
Package deal?
Pm Sent for shipping price?
Cam, lifters, pushrods, timing chain are all new, installed but never ran.
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
Cam, lifters, pushrods, timing chain are all new, installed but never ran.
Lunati VooDoo Roller conversion cam 20120711 ground on small base circle - $250
(duration 219/227 @.050 lift 515/530 w/1.5 rockers)
Lunati roller conversion lifters 72330-16 - $325
Lunati sportsman pushrods 7.3 - $80
Cloyes 2 piece Aluminum timing cover - $100
Lunati sportsman timing set with torrington bearing - $35
COMP Cams 1.6 High Energy Aluminum Rocker Arms 17002 3/8" - $125
Last edited by lowes-yellow77; 06-17-2017 at 07:02 PM. Reason: Add
