WTB: 71 parts
#1
Safety Car
Thread Starter
71 parts
this is a low horse sm block car
looking for the steel line from the distributor vacuum Advance to the carb. there is a piece of rubber on each end of it. can use just the metal piece. also the metal clip that supports the line, (it bolts under and intake manifold bolt)
RC15 A/C delco rad cap
a working pair of saddle shoulder belts.
i know i can buy some of this stuff repo, but looking for good used stuff
thanks in advance
looking for the steel line from the distributor vacuum Advance to the carb. there is a piece of rubber on each end of it. can use just the metal piece. also the metal clip that supports the line, (it bolts under and intake manifold bolt)
RC15 A/C delco rad cap
a working pair of saddle shoulder belts.
i know i can buy some of this stuff repo, but looking for good used stuff
thanks in advance
#2
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
This might well be the item you are seeking.
Let me know if you need additional pictures or information.
I only have one of the two rubber ends.
David
Let me know if you need additional pictures or information.
I only have one of the two rubber ends.
David
#3
Safety Car
Thread Starter
thanks david. but i believe yours is the one for the transmission modulator to the back of the intake. the one i need is from the distributor to the front of the carb
#4
Senior Member
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Sorry about that. Wish I had it, would have just given it to you. Darn it. Good luck with your search. David
#5
this is a low horse sm block car
looking for the steel line from the distributor vacuum Advance to the carb. there is a piece of rubber on each end of it. can use just the metal piece. also the metal clip that supports the line, (it bolts under and intake manifold bolt)
RC15 A/C delco rad cap
a working pair of saddle shoulder belts.
i know i can buy some of this stuff repo, but looking for good used stuff
thanks in advance
looking for the steel line from the distributor vacuum Advance to the carb. there is a piece of rubber on each end of it. can use just the metal piece. also the metal clip that supports the line, (it bolts under and intake manifold bolt)
RC15 A/C delco rad cap
a working pair of saddle shoulder belts.
i know i can buy some of this stuff repo, but looking for good used stuff
thanks in advance
has a little metal missing on the corner.
10.00 shipped
Saddle shoulder belt one single Dated 32 B 71 retracts perfectly
165.00 shipped
Available to any other forum members if you decide to pass.
email me if interested grantwong@telus.net
Thanks, Grant