Jazzyced

Hi,
Edit 3: steering column with steering wheel sold, pending delivery, thanks Greg!
Edit 2: Chassis sold, thanks Chris! Pictures and text relating to chassis removed for clarity
Edit 1:
/*It came to my attention by reading another chassis frame, that my use of the word 'restored' for the chassis was not accurate.
The chassis was not blocked and measured or straightened, nor am I aware that it needs it.
If there is a way to check it by myself, please let me know, I will gladly oblige.
It came from a no hit car.*/

All items are located near Boston, Mass.
Pickup is preferred, unless you really insist on shipping and indicate your preferred carrier solution.
All items are heavy and bulky and may command a high shipping cost.

I am flexible with the prices, so PM me with an offer if you want!
All pics are below.

1/ 76 chassis: SOLD

2/ Steering wheel and tilt column (76), including ignition keys. All parts as in pictures.
SOLD

3/ 76-77 floor pans (LH and RH), new but have surface rust
Price: $200 for the pair, OBO



New pics and column details. Added 2017/07/03

AllC34Me

Your price is very good and in my opinion exactly where it should be for a nice 1977 frame; and I am interested in it. My questions on blocking and measurements are associated with unknown origin frames or for folks really suggesting they have restored them to original or better condition. Measurements alone will usually suffice for my needs but I always ask the question because it costs money to have them checked at a frame shop and that helps to support higher asking prices.

Rough dimension measurements can be taken across the frame to indicate that it is straight. Blocking is done if there is an indication of the frame being twisted such as an accident car. With a no hit car then only the dimensions usually matter.

If you like, you can measure it against this drawing here and determine if it is close to the original dimensions, which I would think yours is.



I am in Easton, PA. Which side of the Boston area are you located? I will PM you shortly and thank you for your time.

David Howard
AllVettes4Me

Jazzyced

I will take the dimensions and report them on the forum.
If it is not straight, I will label it and offer it for sell such.

4:30 hours is a bit of a drive, I do not want to waste anybody's time, so the more accurate information with precise language, the better!
If you have any question do not hesitate to ask.

Your comment about the definition of a restored frame was very useful and welcome.

Ced

Jazzyced

Here are some basic dimensions.
It looks spot on, but were taken with a measuring tape...
I will add more to them as I get them.

Ced

Jazzyced

Chassis sold, thanks Chris!