WTB: 350 Cu In Engine Needed
#1
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
350 Cu In Engine Needed
I am no longer in the market for an engine block for the 77 coupe.
Thank you for looking and best regards,
David Howard
Thank you for looking and best regards,
David Howard
Last edited by AllC34Me; 07-25-2017 at 03:46 PM.
#3
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
I'd like it to be a corvette engine if possible. 2 or 4 bolt would work. Thank you Chuck. I appreciate it.
David
David
#4
Hey David,
I sent you a PM. I am currently selling my 350 engine. I am doing an LS3 swap so I need to unload this one ASAP. Take a look and let me know what you think. Thank you.
https://www.corvetteforum.com/forums...e-reduced.html
-Preston
I sent you a PM. I am currently selling my 350 engine. I am doing an LS3 swap so I need to unload this one ASAP. Take a look and let me know what you think. Thank you.
https://www.corvetteforum.com/forums...e-reduced.html
-Preston
#5
Burning Brakes
David,
I just picked up a 73 010 block to replace my cracked block out of my 80. The guy I used is about 25 miles from me, and specializes in chevy small blocks. He has roughly 100 blocks at his house most disassembled. He is a smart guy who knows production codes and numbers. He does this as a hobby...I think he is a machinist.
PM me if you want his contact info, I think he has all his parts cataloged. He is also very reasonable...my block was $120 He lists stuff on Craigslist and is in the town of Mundelein, IL
Let me know..
Steve
I just picked up a 73 010 block to replace my cracked block out of my 80. The guy I used is about 25 miles from me, and specializes in chevy small blocks. He has roughly 100 blocks at his house most disassembled. He is a smart guy who knows production codes and numbers. He does this as a hobby...I think he is a machinist.
PM me if you want his contact info, I think he has all his parts cataloged. He is also very reasonable...my block was $120 He lists stuff on Craigslist and is in the town of Mundelein, IL
Let me know..
Steve
#6
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
David,
I just picked up a 73 010 block to replace my cracked block out of my 80. The guy I used is about 25 miles from me, and specializes in chevy small blocks. He has roughly 100 blocks at his house most disassembled. He is a smart guy who knows production codes and numbers. He does this as a hobby...I think he is a machinist.
PM me if you want his contact info, I think he has all his parts cataloged. He is also very reasonable...my block was $120 He lists stuff on Craigslist and is in the town of Mundelein, IL
Let me know..
Steve
I just picked up a 73 010 block to replace my cracked block out of my 80. The guy I used is about 25 miles from me, and specializes in chevy small blocks. He has roughly 100 blocks at his house most disassembled. He is a smart guy who knows production codes and numbers. He does this as a hobby...I think he is a machinist.
PM me if you want his contact info, I think he has all his parts cataloged. He is also very reasonable...my block was $120 He lists stuff on Craigslist and is in the town of Mundelein, IL
Let me know..
Steve
Best regards,
David
#8
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Thank you sir.
David Howard
#9
4th Gear
Engine for sale
I will sell the race short block from my '73 Vette. If you want a complete engine, I will sell it also. Do you want a street motor or a race motor? Also have the Muncie from the '73 rebuilt with M22 close-ratio gears (Gears from Autogear). Engine is 560 hp If you are interested, I can send more details.
#10
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
Thank you. I will be building a street motor and I have the transmission already. Thank you though.
David
David
The following users liked this post:
AllC34Me (07-24-2017)
#12
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
#13
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
#14
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
David,
I just picked up a 73 010 block to replace my cracked block out of my 80. The guy I used is about 25 miles from me, and specializes in chevy small blocks. He has roughly 100 blocks at his house most disassembled. He is a smart guy who knows production codes and numbers. He does this as a hobby...I think he is a machinist.
PM me if you want his contact info, I think he has all his parts cataloged. He is also very reasonable...my block was $120 He lists stuff on Craigslist and is in the town of Mundelein, IL
Let me know..
Steve
I just picked up a 73 010 block to replace my cracked block out of my 80. The guy I used is about 25 miles from me, and specializes in chevy small blocks. He has roughly 100 blocks at his house most disassembled. He is a smart guy who knows production codes and numbers. He does this as a hobby...I think he is a machinist.
PM me if you want his contact info, I think he has all his parts cataloged. He is also very reasonable...my block was $120 He lists stuff on Craigslist and is in the town of Mundelein, IL
Let me know..
Steve
Thanks again.
David
#15
Senior Member
Thread Starter
Member Since: Jan 2008
Location: Easton, PA
Posts: 12,154
Received 2,031 Likes
on
1,103 Posts
St. Jude Donor '10
The 77 project no longer needs another short block.
Thank you for your help.
Best regards,
David Howard
Thank you for your help.
Best regards,
David Howard