When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Original power steering pump, maybe as I may need the pulleys also
As some may know I am in a multi-year frame off on my 69' L46 convertible.
I was looking at the power steering pump (reman'd) and the water pump pulleys and crank pulley. I know the crank pulley is wrong, as I do not have air cond and it I need
just the 2 groove crank pulley. I am confused if I need deep groove pulleys, I believe yes as this is a Hi HP small block.
Anyway, if anyone has a good original pump and can assist with the pulleys, let me know.
Also, the pump should have a cast pulley and has a part number on it.
Thanks
Last edited by jhudec; 07-21-2018 at 05:20 PM.
Reason: pic
TTT
I added a pic so everyone can see what I need.
Someone has to have one of these laying around from a serpentine conversion etc.
I do not believe I need any crank or water pump pulleys as mine match the aim, just the pump I have is wrong.
Thanks,
Joe
Don't know if you'd be interested in my pump, minus the pulley ... A long time ago, I switched my '67 over to rack & pinion steering, and put the GM fluid can on AGR pump internals. I have since switched over again to a Borgeson set-up, and have my pump available, if it's at all what you're looking for ... The can has a dent near the pass side shoulder (as can be seen in the pics), but doesn't leak, and I think the can is the same for '63 to '74. Pump runs fine, with good output or other issues. Also, my can has a metal, 2-tab lid on it ... Sorry, I don't have a pulley for your set-up. Let me know if you're interested ... Good luck with your build ...
Sincerely,
John A, 67L88Vette
07-14-2018, 08:41 PM
Original power steering pump, maybe as I may need the pulleys also
