FS: Gauge Cluster(s)
#1
Melting Slicks
Thread Starter
Member Since: Nov 2005
Location: Green Valley Arizona
Posts: 3,185
Likes: 0
Received 106 Likes
on
71 Posts
Gauge Cluster(s)
Found another box in my garage containing center gauge clusters:
1. Original gauge cluster from my '81, all were working including the clock when removed. I had added a new radio with a digital clock so I replaced the analog clock with a oil temp gauge, which required a bezel from an '82. It does not have the flex print circuit on the back (it is in the car). $150 plus shipping.
2. Oil temp gauge. $25 shipped
3. Speedo, $50, plus shipped
Pictures are below:]
1. Original gauge cluster from my '81, all were working including the clock when removed. I had added a new radio with a digital clock so I replaced the analog clock with a oil temp gauge, which required a bezel from an '82. It does not have the flex print circuit on the back (it is in the car). $150 plus shipping.
2. Oil temp gauge. $25 shipped
3. Speedo, $50, plus shipped
Pictures are below:]
Last edited by LannyL81; 11-10-2021 at 10:03 AM.
#4
Le Mans Master
I'll bite. PM sent for the two unpopulated bezels.
#6
Melting Slicks
Thread Starter
Member Since: Nov 2005
Location: Green Valley Arizona
Posts: 3,185
Likes: 0
Received 106 Likes
on
71 Posts
Yeah I saw your gauges for sell as well. Correct me if wrong here, but the gauges are the same for 78-82 with the exception that in 82 the analog clock was replaced with an oil temp gauge due to the digital clock......or was that an option in 81?.....now I am not sure anymore, been too long.
As I said above I replaced the clock in my 81 as I installed the ETR radio/cass with the digital clock. I had both analog and digital clocks for awhile but it just did not look right so I bought a used set of gauges/bezel with the oil temp gauge and swapped it....that is why I have the complete set out of my 81...except for the flex print which I had to use. I used to have a spare flex print but think I sold it.
Anyways, someone needs to buy these gauges.
As I said above I replaced the clock in my 81 as I installed the ETR radio/cass with the digital clock. I had both analog and digital clocks for awhile but it just did not look right so I bought a used set of gauges/bezel with the oil temp gauge and swapped it....that is why I have the complete set out of my 81...except for the flex print which I had to use. I used to have a spare flex print but think I sold it.
Anyways, someone needs to buy these gauges.
Last edited by LannyL81; 01-11-2019 at 04:56 PM.
#8
Instructor
Hi Lanny, I am only interested in the 81 clock, I presume, it's all original, not the quartz movement. Would you be okay to say goodbye just to this item? Thanks Tom
#10
Instructor